From 7dceef5ee554ec4ab5d2dd2ff999f4a60bf2e0f4 Mon Sep 17 00:00:00 2001 From: David Bauer Date: Tue, 14 Mar 2023 02:06:40 +0100 Subject: ramips: add support for TP-Link Archer AX23 v1 Hardware -------- CPU: MediaTek MT7621 DAT RAM: 128MB DDR3 (integrated) FLASH: 16MB SPI-NOR () WiFi: MediaTek MT7905 + MT7975 (2.4 / 5 DBDC) 802.11ax SERIAL: 115200 8N1 LEDs - (3V3 - GND - RX - TX) - ETH ports Installation ------------ Upload the factory image using the Web-UI. Web-Recovery ------------ The router supports a HTTP recovery mode by holding the reset-button when powering on. The interface is reachable at 192.168.0.1 and supports installation using the factory image. Signed-off-by: David Bauer --- target/linux/ramips/image/mt7621.mk | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'target/linux/ramips/image') diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk index a88f00e6775..90b8bba2a56 100644 --- a/target/linux/ramips/image/mt7621.mk +++ b/target/linux/ramips/image/mt7621.mk @@ -2038,6 +2038,18 @@ define Device/totolink_x5000r endef TARGET_DEVICES += totolink_x5000r +define Device/tplink_archer-ax23-v1 + $(Device/dsa-migration) + $(Device/tplink-safeloader) + DEVICE_MODEL := Archer AX23 + DEVICE_VARIANT := v1 + DEVICE_PACKAGES := kmod-mt7915-firmware -uboot-envtools + TPLINK_BOARD_ID := ARCHER-AX23-V1 + KERNEL := $(KERNEL_DTB) | uImage lzma + IMAGE_SIZE := 15744k +endef +TARGET_DEVICES += tplink_archer-ax23-v1 + define Device/tplink_archer-a6-v3 $(Device/dsa-migration) $(Device/tplink-safeloader) -- cgit v1.2.3