From 37af596593b0e84d0a076ab8f173066e3d7bc810 Mon Sep 17 00:00:00 2001 From: Cezary Jackiewicz Date: Thu, 19 Apr 2018 19:34:22 +0200 Subject: ramips: add support for D-Link DWR-118-A2 The DWR-118-A2 Wireless Router is based on the MT7620A SoC. Specification: - MediaTek MT7620A (580 Mhz) - 128 MB of RAM - 16 MB of FLASH - 1x 802.11bgn radio - 1x 802.11ac radio (MT7612EN) - 4x 10/100 Mbps Ethernet (1 WAN and 3 LAN) - 1x 10/100/1000 Mbps Marvell Ethernet PHY (1 LAN) - 2x external, non-detachable antennas - 1x USB 2.0 - UART (J1) header on PCB (57600 8n1) - 7x LED (5x GPIO-controlled), 2x button - JBOOT bootloader Known issues: - GELAN not working - flash is very slow The status led has been assigned to the dwr-118-a2:green:internet led. At the end of the boot it is switched off and is available for other operation. Work correctly also during sysupgrade operation. Installation: Apply factory image via http web-gui or JBOOT recovery page How to revert to OEM firmware: - push the reset button and turn on the power. Wait until LED start blinking (~10sec.) - upload original factory image via JBOOT http (IP: 192.168.123.254) Signed-off-by: Cezary Jackiewicz Signed-off-by: Pawel Dembicki --- target/linux/ramips/image/mt7620.mk | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'target/linux/ramips/image') diff --git a/target/linux/ramips/image/mt7620.mk b/target/linux/ramips/image/mt7620.mk index c759a89f24..c511a17ac1 100644 --- a/target/linux/ramips/image/mt7620.mk +++ b/target/linux/ramips/image/mt7620.mk @@ -164,6 +164,20 @@ define Device/dlink_dwr-116-a1 endef TARGET_DEVICES += dlink_dwr-116-a1 +define Device/dlink_dwr-118-a2 + DTS := DWR-118-A2 + DEVICE_TITLE := D-Link DWR-118 A2 + DEVICE_PACKAGES := kmod-usb2 jboot-tools kmod-mt76 + DLINK_ROM_ID := DLK6E3814001 + DLINK_FAMILY_MEMBER := 0x6E38 + DLINK_FIRMWARE_SIZE := 0xFE0000 + KERNEL := $(KERNEL_DTB) + IMAGES += factory.bin + IMAGE/sysupgrade.bin := mkdlinkfw | pad-rootfs | append-metadata + IMAGE/factory.bin := mkdlinkfw | pad-rootfs | mkdlinkfw-factory +endef +TARGET_DEVICES += dlink_dwr-118-a2 + define Device/dlink_dwr-921-c1 DTS := DWR-921-C1 IMAGE_SIZE := $(ralink_default_fw_size_16M) -- cgit v1.2.3