From 2876f7534fe84f047f02bdda2886a9aeedbb8e76 Mon Sep 17 00:00:00 2001 From: Kim Namu Date: Thu, 24 Feb 2022 00:14:37 +0900 Subject: ramips: mt7621: add support for Zbtlink ZBT-WG1608 Zbtlink ZBT-WG1608 is a Wi-Fi router intendent to use with WWAN (4G/5G) modems. Specifications: * SoC: MediaTek MT7621A * RAM: 256/512 MiB * Flash: 16/32 MiB (SPI NOR) * Wi-Fi: * MediaTek MT7603E : 2.4Ghz * MediaTek MT7613BE : 5Ghz * Ethernet: 10/100/1000 Mbps Ethernet x5 ports (4xLAN + WAN) * M.2: 1x slot with USB&SIM * EM7455/EM12-G/EM160R/RM500Q-AE * USB: 1x 3.0 Type-A port * External storage: 1x microSD (SDXC) slot * UART: console (115200 baud) * LED: * 1 power indicator * 1 WLAN 2.4G controlled (wlan 2G) * 3 SoC controlled (wlan 5G, wwan, internet) * 5 per Eth phy (4xLAN + WAN) MAC Addresses: * LAN : f8:5e:3c:xx:xx:e0 (Factory, 0xe000 (hex)) * WAN : f8:5e:3c:xx:xx:e1 (Factory, 0xe006 (hex)) * 2.4 GHz: f8:5e:3c:xx:xx:de (Factory, 0x0004 (hex)) * 5 GHz : f8:5e:3c:xx:xx:df (Factory, 0x8004 (hex)) Installation: * Vendor's firmware is OpenWrt (LEDE) based, so the sysupgrade image can be directly used to install OpenWrt. Firmware must be upgraded using the 'force' and 'do not save configuration' command line options (or correspondig web interface checkboxes) since the vendor firmware is from the pre-DSA era. Recovery Mode: * Press reset button, power up the device, wait for about 10sec. * Upload sysupgrade image through the firmware recovery mode web page at 192.168.1.1. Signed-off-by: Kim Namu --- target/linux/ramips/image/mt7621.mk | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'target/linux/ramips/image') diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk index 011a96a59e..44b04dbefb 100644 --- a/target/linux/ramips/image/mt7621.mk +++ b/target/linux/ramips/image/mt7621.mk @@ -1911,6 +1911,18 @@ define Device/zbtlink_zbt-wg1602-16m endef TARGET_DEVICES += zbtlink_zbt-wg1602-16m +define Device/zbtlink_zbt-wg1608-16m + $(Device/dsa-migration) + $(Device/uimage-lzma-loader) + IMAGE_SIZE := 16064k + DEVICE_VENDOR := Zbtlink + DEVICE_MODEL := ZBT-WG1608 + DEVICE_VARIANT := 16M + DEVICE_PACKAGES := kmod-sdhci-mt7620 kmod-mt7603 kmod-mt7615e \ + kmod-mt7663-firmware-ap kmod-usb3 kmod-usb-ledtrig-usbport +endef +TARGET_DEVICES += zbtlink_zbt-wg1608-16m + define Device/zbtlink_zbt-wg2626 $(Device/dsa-migration) $(Device/uimage-lzma-loader) -- cgit v1.2.3