From 20b09a2125f5b35ade1f3e9cebb15fe03e3b4e3c Mon Sep 17 00:00:00 2001 From: Pawel Dembicki Date: Sat, 17 Nov 2018 08:47:40 +0000 Subject: ramips: add support for Lava LR-25G001 The Lava LR-25G001 Wireless Router is based on the MT7620A SoC. Specification: - MediaTek MT7620A (580 Mhz) - 64 MB of RAM - 16 MB of FLASH - 1x 802.11bgn radio - 1x 802.11ac radio (MT7610EN) - 5x 10/100/1000 Mbps AR8337 Switch (1 WAN AND 4 LAN) - 2x external, detachable antennas - 1x USB 2.0 - UART (J3) header on PCB (57600 8n1) - 8x LED (3x GPIO-controlled), 2x button - JBOOT bootloader Known issues: - Work only three Gigabit ports (3/5, 1 WAN and 2LAN) Installation: Apply factory image via http web-gui or JBOOT recovery page How to revert to OEM firmware: - push the reset button and turn on the power. Wait until LED start blinking (~10sec.) - upload original factory image via JBOOT http (IP: 192.168.123.254) Signed-off-by: Pawel Dembicki --- target/linux/ramips/image/mt7620.mk | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'target/linux/ramips/image') diff --git a/target/linux/ramips/image/mt7620.mk b/target/linux/ramips/image/mt7620.mk index 61a6e56937..5e3d37b5c8 100644 --- a/target/linux/ramips/image/mt7620.mk +++ b/target/linux/ramips/image/mt7620.mk @@ -352,6 +352,21 @@ define Device/microwrt endef TARGET_DEVICES += microwrt +define Device/lava_lr-25g001 + DTS := LR-25G001 + DEVICE_TITLE := LAVA LR-25G001 + DLINK_ROM_ID := LVA6E3804001 + DLINK_FAMILY_MEMBER := 0x6E38 + DLINK_FIRMWARE_SIZE := 0xFE0000 + KERNEL := $(KERNEL_DTB) + IMAGES += factory.bin + IMAGE/sysupgrade.bin := mkdlinkfw | pad-rootfs | append-metadata + IMAGE/factory.bin := mkdlinkfw | pad-rootfs | mkdlinkfw-factory + DEVICE_PACKAGES := jboot-tools kmod-usb2 kmod-mt76 kmod-mt76x0-common \ + kmod-mt76x0e +endef +TARGET_DEVICES += lava_lr-25g001 + define Device/miwifi-mini DTS := MIWIFI-MINI IMAGE_SIZE := $(ralink_default_fw_size_16M) -- cgit v1.2.3