From 14951e8f8e09ba6e2cff140769189a66155a5345 Mon Sep 17 00:00:00 2001 From: Henryk Heisig Date: Sun, 28 Jan 2018 19:49:38 +0100 Subject: ramips: add support for TP-Link Archer C50 v3 TP-Link Archer C50 v3 is a router with 5-port FE switch and non-detachable antennas. It's based on MediaTek MT7628N+MT7612E. Specification: - MediaTek MT7628N/N (580 Mhz) - 64 MB of RAM - 8 MB of FLASH - 2T2R 2.4 GHz and 2T2R 5 GHz - 5x 10/100 Mbps Ethernet - 4x external, non-detachable antennas - UART (J1) header on PCB (115200 8n1) - 7x LED (GPIO-controlled*), 2x button, power switch * WAN LED in this devices is a dual-color, dual-leads type which isn't (fully) supported by gpio-leds driver. This type of LED requires both GPIOs state change at the same time to select color or turn it off. For now, we support/use only the green part of the LED. Flash instruction: The only way to flash LEDE image in ArcherC50v3 is to use tftp recovery mode in U-Boot: 1. Configure PC with static IP 192.168.0.66/24 and tftp server. 2. Rename "openwrt-ramips-mt7628-ArcherC50v3-squashfs-tftp-recovery.bin" to "tp_recovery.bin" and place it in tftp server directory. 3. Connect PC with one of LAN ports, press the reset button, power up the router and keep button pressed for around 6-7 seconds, until device starts downloading the file. 4. Router will download file from server, write it to flash and reboot. Signed-off-by: Henryk Heisig --- target/linux/ramips/image/mt76x8.mk | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'target/linux/ramips/image') diff --git a/target/linux/ramips/image/mt76x8.mk b/target/linux/ramips/image/mt76x8.mk index d12aaf0eec..fe52809570 100644 --- a/target/linux/ramips/image/mt76x8.mk +++ b/target/linux/ramips/image/mt76x8.mk @@ -152,6 +152,19 @@ define Device/tplink_c20-v4 endef TARGET_DEVICES += tplink_c20-v4 +define Device/tplink_c50-v3 + $(Device/tplink) + DTS := ArcherC50V3 + IMAGE_SIZE := 7808k + DEVICE_TITLE := TP-Link ArcherC50 v3 + TPLINK_FLASHLAYOUT := 8Mmtk + TPLINK_HWID := 0x001D9BA4 + TPLINK_HWREV := 0x79 + TPLINK_HWREVADD := 0x1 + TPLINK_HVERSION := 3 +endef +TARGET_DEVICES += tplink_c50-v3 + define Device/tplink_tl-mr3420-v5 $(Device/tplink) DTS := TL-MR3420V5 -- cgit v1.2.3