From f2c83532f92c5fa43165e1c5a3cd7f5cf4e9e3b3 Mon Sep 17 00:00:00 2001 From: Kip Porterfield Date: Sun, 3 Feb 2019 13:54:18 -0500 Subject: ramips: add support for Belkin F9K1109v1 Device specification: - SoC: Ralink RT3883 (MIPS 74Kc) 500Mhz - RAM: 64Mb - Flash: 8MB (SPI-NOR) - Ethernet: 10/100/1000 Mbps - WLAN Wireless 1: SoC-integrated : 2.4/5 GHz Wireless 2: 2.4 GHz RT3092L - LED: 2x USB, WAN, LAN - Key: WPS, reset - Serial: 4-pin header, (57600,8,N,1), 3.3V TTL, GND, RX, TX, V - J12 marking on board - USB ports: 2 x USB 2.0 Flashing instructions: Option 1 (from bootloader web) - Hold reset button on the back of router when plugging in power (for at-least 10 seconds after plugged in) - Connect to a Lan port - Set computer IP to 10.10.10.3 - Go to http://10.10.10.123 in a web browser - Click the Browse... Button and select the *squashfs.sysupgrade.bin file then click APPLY Option 2 (from the stock admin web) - Go to firmware upgrade - Upload the **factory** image *initramfs.bin first - Boot into openwrt - From Luci web in openwrt upload the *squashfs.sysupgrade.bin Signed-off-by: Kip Porterfield Signed-off-by: Christian Lamparter [added v1 to the compatible identifier, added pciid for the RT3092L, fixed pci unit-address, split out the F9K110X.dtsi to prepare for a possible F9K1103 patch] --- target/linux/ramips/image/rt3883.mk | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'target/linux/ramips/image/rt3883.mk') diff --git a/target/linux/ramips/image/rt3883.mk b/target/linux/ramips/image/rt3883.mk index abee533d01..41b2c3dd5f 100644 --- a/target/linux/ramips/image/rt3883.mk +++ b/target/linux/ramips/image/rt3883.mk @@ -41,6 +41,18 @@ endef TARGET_DEVICES += dir-645 +define Device/belkin_f9k1109v1 + DTS := F9K1109V1 + BLOCKSIZE := 64k + DEVICE_TITLE := Belkin F9K1109 Version 1.0 + DEVICE_PACKAGES := kmod-usb-core kmod-usb-ohci kmod-usb2 swconfig + IMAGE_SIZE := 7224k + KERNEL := kernel-bin | patch-dtb | lzma -d16 | uImage lzma + # Stock firmware checks for this uImage image name during upload. + UIMAGE_NAME := N750F9K1103VB +endef +TARGET_DEVICES += belkin_f9k1109v1 + define Device/hpm DTS := HPM BLOCKSIZE := 64k -- cgit v1.2.3