From 8d497b65704f62294a4bbc0e1f5aa4eb1dbf9e24 Mon Sep 17 00:00:00 2001 From: Alexander Couzens Date: Tue, 1 Jun 2021 21:09:26 +0000 Subject: ramips: add support for minew g1-c The minew g1-c is a smart home gateway / BLE gateway. A Nordic nRF52832 is available via USB UART (cp210x) to support BLE. The LED ring is a ring of 24x ws2812b connect to a generic GPIO (unsupported). There is a small LED which is only visible when the device is open which will be used as LED until the ws2812b is supported. The board has also a micro sdcard/tfcard slot (untested). The Nordic nRF52832 exposes SWD over a 5pin header (GND, VCC, SWD, SWC, RST). The vendor uses an older OpenWrt version, sysupgrade can be used via serial or ssh. CPU: MT7628AN / 580MHz RAM: DDR2 128 MiB RAM Flash: SPI NOR 16 MiB W25Q128 Ethernet: 1x 100 mbit (Port 0) (PoE in) USB: USB hub, 2x external, 1x internal to USB UART Power: via micro usb or PoE 802.11af UART: 3.3V, 115200 8n1 Signed-off-by: Alexander Couzens --- target/linux/ramips/image/mt76x8.mk | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'target/linux/ramips/image/mt76x8.mk') diff --git a/target/linux/ramips/image/mt76x8.mk b/target/linux/ramips/image/mt76x8.mk index 3ba4d658be..3f738fc488 100644 --- a/target/linux/ramips/image/mt76x8.mk +++ b/target/linux/ramips/image/mt76x8.mk @@ -269,6 +269,14 @@ define Device/mercury_mac1200r-v2 endef TARGET_DEVICES += mercury_mac1200r-v2 +define Device/minew_g1-c + IMAGE_SIZE := 15744k + DEVICE_VENDOR := Minew + DEVICE_MODEL := G1-C + DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport kmod-usb-serial-cp210x +endef +TARGET_DEVICES += minew_g1-c + define Device/netgear_r6020 $(Device/netgear_sercomm_nor) IMAGE_SIZE := 7104k -- cgit v1.2.3