From 5f6e94855113b0c37fba57eda4af0b0427457b98 Mon Sep 17 00:00:00 2001 From: Roger Pueyo Centelles Date: Sun, 6 Nov 2016 13:00:38 +0100 Subject: ramips: Add support for Wavlink WL-WN575A3 This commit adds support for the Wavlink WL-WN575A3, a dual-band wall-plug wireless router with the following specifications: - CPU: MediaTek MT7628AN 580MHz - Flash: 8MB - RAM: 64MB - Ethernet: 2x 10/100 Mbps (switched) - 2.4 GHz: 802.11b/g/n SoC, MIMO 2x2, 20 dBm - 5 GHz: 802.11a/n/ac MT7612E, MIMO 2x2, 20 dBm - Antennas: 4x external (2 per radio), non-detachable - LEDs: 4 programmable + LAN, WAN, POWER - Buttons: reset, WPS Flashing instructions: Factory U-boot launches a TFTP client if WPS button is pressed during power-on. Rename the sysupgrade file and configure a TFTP as follows: - Client (WL-WN575A3) IP: 192.168.10.101 - Server IP: 192.168.10.100 - Filename: firmware.bin Signed-off-by: Roger Pueyo Centelles --- target/linux/ramips/image/mt7628.mk | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'target/linux/ramips/image/mt7628.mk') diff --git a/target/linux/ramips/image/mt7628.mk b/target/linux/ramips/image/mt7628.mk index 75fbb3dabd..7a7ddce3c9 100644 --- a/target/linux/ramips/image/mt7628.mk +++ b/target/linux/ramips/image/mt7628.mk @@ -19,6 +19,13 @@ define Device/miwifi-nano endef TARGET_DEVICES += miwifi-nano +define Device/wl-wn575a3 + DTS := WL-WN575A3 + IMAGE_SIZE := $(ralink_default_fw_size_8M) + DEVICE_TITLE := Wavlink WL-WN575A3 +endef +TARGET_DEVICES += wl-wn575a3 + define Device/wrtnode2p DTS := WRTNODE2P IMAGE_SIZE := $(ralink_default_fw_size_16M) -- cgit v1.2.3