From 57cb387cfeee2a07902a2f1383ca471ef47265f3 Mon Sep 17 00:00:00 2001 From: Chukun Pan Date: Sun, 16 May 2021 20:10:05 +0800 Subject: ramips: add support for JCG Q20 JCG Q20 is an AX 1800M router. Hardware specs: SoC: MediaTek MT7621AT Flash: Winbond W29N01HV 128 MiB RAM: Winbond W632GU6NB-11 256 MiB WiFi: MT7915 2.4/5 GHz 2T2R Ethernet: 10/100/1000 Mbps x3 LED: Status (red / blue) Button: Reset, WPS Power: DC 12V,1A Flash instructions: Upload factory.bin in stock firmware's upgrade page, do not preserve settings. MAC addresses map: 0x00004 *:3e wlan2g/wlan5g 0x3fff4 *:3c lan/label 0x3fffa *:3c wan Signed-off-by: Chukun Pan --- target/linux/ramips/image/mt7621.mk | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) (limited to 'target/linux/ramips/image/mt7621.mk') diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk index 1ae49cb96e..20433f783d 100644 --- a/target/linux/ramips/image/mt7621.mk +++ b/target/linux/ramips/image/mt7621.mk @@ -720,6 +720,23 @@ define Device/jcg_jhr-ac876m endef TARGET_DEVICES += jcg_jhr-ac876m +define Device/jcg_q20 + $(Device/dsa-migration) + BLOCKSIZE := 128k + PAGESIZE := 2048 + UBINIZE_OPTS := -E 5 + KERNEL_SIZE := 4096k + IMAGE_SIZE := 91136k + IMAGES += factory.bin + IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata + IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | \ + check-size + DEVICE_VENDOR := JCG + DEVICE_MODEL := Q20 + DEVICE_PACKAGES := kmod-mt7915e uboot-envtools +endef +TARGET_DEVICES += jcg_q20 + define Device/jcg_y2 $(Device/dsa-migration) $(Device/uimage-lzma-loader) -- cgit v1.2.3