From 3a8d65010d999275a583c42064b60ab9a3cdce84 Mon Sep 17 00:00:00 2001 From: INAGAKI Hiroshi Date: Sat, 16 May 2020 17:39:26 +0900 Subject: ramips: add support for ELECOM WRC-2533GST2 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit ELECOM WRC-2533GST2 is a 2.4/5 GHz band 11ac (Wi-Fi 5) router, based on MT7621A. Specification: - SoC : MediaTek MT7621A - RAM : DDR3 256 MiB - Flash : SPI-NOR 32 MiB - WLAN : 2.4/5 GHz 4T4R (2x MediaTek MT7615) - Ethernet : 10/100/1000 Mbps x5 - Switch : MediaTek MT7530 (SoC) - LED/keys : 4x/6x (2x buttons, 1x slide-switch) - UART : through-hole on PCB - J4: 3.3V, GND, TX, RX from ethernet port side - 57600n8 - Power : 12VDC, 1.5A Flash instruction using factory image: 1. Boot WRC-2533GST2 normally 2. Access to "http://192.168.2.1/" and open firmware update page ("ファームウェア更新") 3. Select the OpenWrt factory image and click apply ("適用") button 4. Wait ~150 seconds to complete flashing Signed-off-by: INAGAKI Hiroshi --- target/linux/ramips/image/mt7621.mk | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'target/linux/ramips/image/mt7621.mk') diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk index 848a0785fb..d6423f81d9 100644 --- a/target/linux/ramips/image/mt7621.mk +++ b/target/linux/ramips/image/mt7621.mk @@ -307,6 +307,18 @@ define Device/elecom_wrc-2533gst endef TARGET_DEVICES += elecom_wrc-2533gst +define Device/elecom_wrc-2533gst2 + $(Device/uimage-lzma-loader) + IMAGE_SIZE := 24576k + DEVICE_VENDOR := ELECOM + DEVICE_MODEL := WRC-2533GST2 + IMAGES += factory.bin + IMAGE/factory.bin := $$(sysupgrade_bin) | check-size | \ + elecom-gst-factory WRC-2533GST2 0.00 + DEVICE_PACKAGES := kmod-mt7615e kmod-mt7615-firmware wpad-basic +endef +TARGET_DEVICES += elecom_wrc-2533gst2 + define Device/firefly_firewrt IMAGE_SIZE := 16064k DEVICE_VENDOR := Firefly -- cgit v1.2.3