From 28262f815e4d0fe5302babc696ed5ce518b33759 Mon Sep 17 00:00:00 2001 From: Andrew Pikler Date: Mon, 5 Oct 2020 17:16:44 +0300 Subject: ramips: add support for D-Link DIR-882 R1 Specifications: - SoC: MediaTek MT7621AT - RAM: 128 MB (DDR3) - Flash: 16 MB (SPI NOR) - WiFi: MediaTek MT7615N (x2) - Switch: 1 WAN, 4 LAN (Gigabit) - Ports: 1 USB 2.0, 1 USB 3.0 - Buttons: Reset, WiFi Toggle, WPS - LEDs: Power, Internet, WiFi 2.4G WiFi 5G, USB 2.0, USB 3.0 The R1 revision is identical to the A1 revision except - No Config2 Parition, therefore - factory partition resized to 64k from 128K - Firmware partition offset is 0x50000 not 0x60000 - Firmware partitions size increased by 64K - Firmware partition type is "denx,uimage", not "sge,uimage" - Padding of image creation "uimage-padhdr 96" removed Installation: - Older firmware versions: put the factory image on a USB stick, turn on the telnet console, and flash using the following cmd "fw_updater Linux /mnt/usb_X_X/firmware.bin" - D-Link FailsafeUI: Power down the router, press and hold the reset button, then re-plug it. Keep the reset button pressed until the internet LED stops flashing, then jack into any lan port and manually assign a static IP address in 192.168.0.0/24 other than 192.168.0.0 (e.g. 192.168.0.2) and go to http://192.168.0.1 Flash with the factory image. Signed-off-by: Andrew Pikler --- target/linux/ramips/image/mt7621.mk | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) (limited to 'target/linux/ramips/image/mt7621.mk') diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk index cc0eb1d279..cf81a862ff 100644 --- a/target/linux/ramips/image/mt7621.mk +++ b/target/linux/ramips/image/mt7621.mk @@ -235,6 +235,17 @@ define Device/dlink_dir-8xx-a1 check-size endef +define Device/dlink_dir-8xx-r1 + $(Device/dsa-migration) + IMAGE_SIZE := 16064k + DEVICE_VENDOR := D-Link + DEVICE_PACKAGES := kmod-mt7615e kmod-mt7615-firmware + KERNEL_INITRAMFS := $$(KERNEL) + IMAGES += factory.bin + IMAGE/sysupgrade.bin := append-kernel | append-rootfs |\ + pad-rootfs | append-metadata | check-size +endef + define Device/dlink_dir-xx60-a1 $(Device/dsa-migration) BLOCKSIZE := 128k @@ -312,6 +323,17 @@ define Device/dlink_dir-882-a1 endef TARGET_DEVICES += dlink_dir-882-a1 +define Device/dlink_dir-882-r1 + $(Device/dlink_dir-8xx-r1) + DEVICE_MODEL := DIR-882 + DEVICE_VARIANT := R1 + DEVICE_PACKAGES += kmod-usb3 kmod-usb-ledtrig-usbport + IMAGE/factory.bin := append-kernel | append-rootfs | check-size | \ + sign-dlink-ru 57c5375741c30ca9ebcb36713db4ba51 \ + ab0dff19af8842cdb70a86b4b68d23f7 +endef +TARGET_DEVICES += dlink_dir-882-r1 + define Device/d-team_newifi-d2 $(Device/dsa-migration) $(Device/uimage-lzma-loader) -- cgit v1.2.3