From e959048c128e4350b78df653be7cd7277787518e Mon Sep 17 00:00:00 2001 From: David Bauer Date: Mon, 29 Jun 2020 12:24:01 +0200 Subject: ramips: add support for RAVPower RP-WD009 The RAVPower RP-WD009 is a batter-powered pocket sized router with SD card lot and USB port. Hardware -------- CPU: MediaTek MT7628AN RAM: 64M DDR2 FLASH: 16M GigaDevices SPI-NOR WLAN: MediaTek MT7628AN 2T2R b/g/n MediaTek MT7610E 1T1R n/ac ETH: 1x FastEthernet SD: SD Card slot USB: USB 2.0 Custom PMIC on the I2C bus (address 0x0a). Installation ------------ 1. Press and hold down the reset button. 2. Power up the Device. Keep pressing the reset button for 10 more seconds until the Globe LED lights up. 3. Attach your Computer to the Ethernet port. Assign yourself the address 10.10.10.1/24. 4. Access the recovery page at 10.10.10.128 and upload the OpenWrt factory image. 5. The flashing will take around 1 minute. The device will reboot automatically into OpenWrt. Signed-off-by: David Bauer --- target/linux/ramips/image/Makefile | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'target/linux/ramips/image/Makefile') diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile index b00e6d8726..93ce59e262 100644 --- a/target/linux/ramips/image/Makefile +++ b/target/linux/ramips/image/Makefile @@ -111,6 +111,12 @@ define Build/poray-header mv $@.new $@ endef +define Build/ravpower-wd009-factory + mkimage -A mips -T standalone -C none -a 0x80010000 -e 0x80010000 -n "OpenWrt Bootloader" -d $(UBOOT_PATH) $@.new + cat $@ >> $@.new + @mv $@.new $@ +endef + define Build/relocate-kernel rm -rf $@.relocate $(CP) ../../generic/image/relocate $@.relocate -- cgit v1.2.3