From a4e9c8f14b63cd44300ed452312c03a69aae9ca1 Mon Sep 17 00:00:00 2001 From: Sungbo Eo Date: Tue, 12 Nov 2019 01:23:07 +0900 Subject: ramips: add support for netis WF2770 netis WF2770 is a 2.4/5GHz band AC750 router, based on MediaTek MT7620A. Specifications: - SoC: MT7620A - RAM: DDR2 64MB - Flash: SPI NOR 16MB - WiFi: - 2.4GHz: SoC internal - 5GHz: MT7610EN - Ethernet: 5x 10/100/1000Mbps - Switch: MT7530BU - UART: - J2: 3.3V, RX, TX, GND (3.3V is the square pad) / 57600 8N1 MAC addresses in factory partition: 0x0004: LAN, WiFi 2.4GHz (label_mac-6) 0x0028: not used (label_mac-1) 0x002e: WAN (label_mac) 0x8004: WiFi 5GHz (label_mac+2) Installation via web interface: 1. Flash **initramfs** image through the stock web interface. 2. Boot into OpenWrt and perform sysupgrade with sysupgrade image. Revert to stock firmware: 1. Perform sysupgrade with stock image. Reviewed-by: Pawel Dembicki Signed-off-by: Sungbo Eo --- target/linux/ramips/image/Makefile | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'target/linux/ramips/image/Makefile') diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile index 4806226fd0..b00e6d8726 100644 --- a/target/linux/ramips/image/Makefile +++ b/target/linux/ramips/image/Makefile @@ -100,6 +100,12 @@ define Build/mkdlinkfw-factory mv $@.new $@ endef +define Build/netis-tail + echo -n $(1) >> $@ + echo -n $(UIMAGE_NAME)-yun | $(STAGING_DIR_HOST)/bin/mkhash md5 | \ + sed 's/../\\\\x&/g' | xargs echo -ne >> $@ +endef + define Build/poray-header $(STAGING_DIR_HOST)/bin/mkporayfw $(1) -f $@ -o $@.new mv $@.new $@ -- cgit v1.2.3