From 52f2d7d2a9dc3e142bb957462a30806eb5cebaf4 Mon Sep 17 00:00:00 2001
From: Anton Arapov <arapov@gmail.com>
Date: Sat, 29 Dec 2018 01:28:27 +0100
Subject: ramips: add RB750Gr3 native support
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

This patch adds support of MikroTik RouterBOARD 750Gr3, without the need
to reflashing the bootloader.

Installation through RouterBoot follows the usual MikroTik method
https://openwrt.org/toh/mikrotik/common

Since the image isn't compatible with RouterBOARD 750Gr3 installations
which have replaced the bootloader, the former used userspace boardname
is not added to the SUPPORTED_DEVICES, to prevent a brick while trying
to upgrade to the image with native support.

Signed-off-by: Anton Arapov <arapov@gmail.com>
Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
Signed-off-by: Mathias Kresin <dev@kresin.me>
---
 target/linux/ramips/dts/RB750Gr3.dts | 58 ++++++++++++++++++++++++------------
 1 file changed, 39 insertions(+), 19 deletions(-)

(limited to 'target/linux/ramips/dts')

diff --git a/target/linux/ramips/dts/RB750Gr3.dts b/target/linux/ramips/dts/RB750Gr3.dts
index 6b18cce78f..da9167ad81 100644
--- a/target/linux/ramips/dts/RB750Gr3.dts
+++ b/target/linux/ramips/dts/RB750Gr3.dts
@@ -22,7 +22,7 @@
 	};
 
 	chosen {
-		bootargs = "console=ttyS0,57600";
+		bootargs = "console=ttyS0,115200";
 	};
 
 	gpio-leds {
@@ -89,34 +89,54 @@
 			#size-cells = <1>;
 
 			partition@0 {
-				label = "u-boot";
-				reg = <0x0 0x30000>;
+				label = "RouterBoot";
+				reg = <0x0 0x40000>;
 				read-only;
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partition@0 {
+					label = "bootloader1";
+					reg = <0x0 0xf000>;
+					read-only;
+				};
+
+				hard_config: partition@f000 {
+					label = "hard_config";
+					reg = <0xf000 0x1000>;
+					read-only;
+				};
+
+				partition@10000 {
+					label = "bootloader2";
+					reg = <0x10000 0xf000>;
+					read-only;
+				};
+
+				partition@20000 {
+					label = "soft_config";
+					reg = <0x20000 0x1000>;
+				};
+
+				partition@30000 {
+					label = "bios";
+					reg = <0x30000 0x1000>;
+					read-only;
+				};
 			};
 
-			partition@30000 {
-				label = "u-boot-env";
-				reg = <0x30000 0x10000>;
-				read-only;
-			};
-
-			factory: partition@40000 {
-				label = "factory";
-				reg = <0x40000 0x10000>;
-				read-only;
-			};
-
-			partition@50000 {
-				compatible = "denx,uimage";
+			partition@40000 {
+				compatible = "mikrotik,minor";
 				label = "firmware";
-				reg = <0x50000 0xfb0000>;
+				reg = <0x040000 0xfc0000>;
 			};
 		};
 	};
 };
 
 &ethernet {
-	mtd-mac-address = <&factory 0xe000>;
+	mtd-mac-address = <&hard_config 0x0010>;
 	mtd-mac-address-increment = <1>;
 };
 
-- 
cgit v1.2.3