From 3b0264eddbc94f43a015a965b9eb3e12cfce0655 Mon Sep 17 00:00:00 2001
From: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Date: Wed, 3 Jul 2019 23:22:36 +0200
Subject: ramips/rt305x: Name DTS files based on scheme

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
---
 .../linux/ramips/dts/rt3052_belkin_f5d8235-v2.dts  | 146 +++++++++++++++++++++
 1 file changed, 146 insertions(+)
 create mode 100644 target/linux/ramips/dts/rt3052_belkin_f5d8235-v2.dts

(limited to 'target/linux/ramips/dts/rt3052_belkin_f5d8235-v2.dts')

diff --git a/target/linux/ramips/dts/rt3052_belkin_f5d8235-v2.dts b/target/linux/ramips/dts/rt3052_belkin_f5d8235-v2.dts
new file mode 100644
index 0000000000..93725e9336
--- /dev/null
+++ b/target/linux/ramips/dts/rt3052_belkin_f5d8235-v2.dts
@@ -0,0 +1,146 @@
+/dts-v1/;
+
+#include "rt3050.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "belkin,f5d8235-v2", "ralink,rt3052-soc";
+	model = "Belkin F5D8235 v2";
+
+	aliases {
+		led-boot = &led_router;
+		led-failsafe = &led_router;
+		led-running = &led_router;
+		led-upgrade = &led_router;
+	};
+
+	cfi@1f000000 {
+		compatible = "cfi-flash";
+		reg = <0x1f000000 0x800000>;
+		bank-width = <2>;
+		device-width = <2>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			uboot: partition@0 {
+				label = "uboot";
+				reg = <0x0 0x50000>;
+				read-only;
+			};
+
+			partition@50000 {
+				compatible = "denx,uimage";
+				label = "firmware";
+				reg = <0x50000 0x790000>;
+			};
+
+			partition@7e0000 {
+				label = "nvram";
+				reg = <0x7e0000 0x10000>;
+			};
+
+			factory: partition@7f0000 {
+				label = "factory";
+				reg = <0x7f0000 0x10000>;
+			};
+		};
+	};
+
+	rtl8366rb {
+		compatible = "realtek,rtl8366rb";
+		gpio-sda = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+		gpio-sck = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		internet {
+			label = "f5d8235-v2:blue:internet";
+			gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+		};
+
+		internet2 {
+			label = "f5d8235-v2:amber:internet";
+			gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+		};
+
+		modem {
+			label = "f5d8235-v2:blue:modem";
+			gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+		};
+
+		modem2 {
+			label = "f5d8235-v2:amber:modem";
+			gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
+		};
+
+		led_router: router {
+			label = "f5d8235-v2:blue:router";
+			gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+		};
+
+		storage {
+			label = "f5d8235-v2:blue:storage";
+			gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&otg_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+		storage2 {
+			label = "f5d8235-v2:amber:storage";
+			gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
+		};
+
+		security {
+			label = "f5d8235-v2:blue:security";
+			gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+		};
+
+		security2 {
+			label = "f5d8235-v2:amber:security";
+			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&pinctrl {
+	state_default: pinctrl0 {
+		gpio {
+			ralink,group = "spi", "i2c", "jtag", "mdio", "uartf";
+			ralink,function = "gpio";
+		};
+	};
+};
+
+&ethernet {
+	mtd-mac-address = <&uboot 0x40004>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+};
+
+&esw {
+	ralink,rgmii = <1>;
+	mediatek,portmap = <0x3f>;
+	ralink,fct2 = <0x0002500c>;
+	/*
+	 * ext phy base addr 31, rx/tx clock skew 0,
+	 * turbo mii off, rgmi 3.3v off, port 5 polling off
+	 * port5: enabled, gige, full-duplex, rx/tx-flow-control
+	 * port6: enabled, gige, full-duplex, rx/tx-flow-control
+	*/
+	ralink,fpa2 = <0x1f003fff>;
+};
+
+&wmac {
+	ralink,mtd-eeprom = <&uboot 0x40000>;
+};
+
+&otg {
+	status = "okay";
+};
-- 
cgit v1.2.3