From 6031ab345df86c285ea55d6523d6888cc596f63d Mon Sep 17 00:00:00 2001
From: Alex Maclean <monkeh@monkeh.net>
Date: Wed, 1 Aug 2018 21:32:34 +0100
Subject: ramips: move partitions into partition table node

Starting with kernel 4.4, the use of partitions as direct subnodes of the
mtd device is discouraged and only supported for backward compatiblity
reasons.

Signed-off-by: Alex Maclean <monkeh@monkeh.net>
---
 target/linux/ramips/dts/TPLINK-8M.dtsi | 44 ++++++++++++++++++----------------
 1 file changed, 24 insertions(+), 20 deletions(-)

(limited to 'target/linux/ramips/dts/TPLINK-8M.dtsi')

diff --git a/target/linux/ramips/dts/TPLINK-8M.dtsi b/target/linux/ramips/dts/TPLINK-8M.dtsi
index c9d0cddb37..8c663822b1 100644
--- a/target/linux/ramips/dts/TPLINK-8M.dtsi
+++ b/target/linux/ramips/dts/TPLINK-8M.dtsi
@@ -15,34 +15,38 @@
 	status = "okay";
 
 	m25p80@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <10000000>;
 		m25p,chunked-io = <32>;
 
-		partition@0 {
-			label = "boot";
-			reg = <0x0 0x20000>;
-			read-only;
-		};
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
 
-		partition@20000 {
-			label = "firmware";
-			reg = <0x20000 0x7a0000>;
-		};
+			partition@0 {
+				label = "boot";
+				reg = <0x0 0x20000>;
+				read-only;
+			};
 
-		partition@7c0000 {
-			label = "config";
-			reg = <0x7c0000 0x10000>;
-			read-only;
-		};
+			partition@20000 {
+				label = "firmware";
+				reg = <0x20000 0x7a0000>;
+			};
+
+			partition@7c0000 {
+				label = "config";
+				reg = <0x7c0000 0x10000>;
+				read-only;
+			};
 
-		factory: partition@7d0000 {
-			label = "factory";
-			reg = <0x7d0000 0x30000>;
-			read-only;
+			factory: partition@7d0000 {
+				label = "factory";
+				reg = <0x7d0000 0x30000>;
+				read-only;
+			};
 		};
 	};
 };
-- 
cgit v1.2.3