From 48047b3a5c6aa9fff89a7a9c7ec76d8335b1a8e7 Mon Sep 17 00:00:00 2001
From: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Date: Wed, 3 Jul 2019 23:22:25 +0200
Subject: ramips/mt7620: Name DTS files based on scheme

As introduced with ath79, DTS files for ramips will now be labelled
soc_vendor_device.dts(i). With this change, DTS files can be
selected automatically without further manual links.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
---
 target/linux/ramips/dts/NA930.dts | 187 --------------------------------------
 1 file changed, 187 deletions(-)
 delete mode 100644 target/linux/ramips/dts/NA930.dts

(limited to 'target/linux/ramips/dts/NA930.dts')

diff --git a/target/linux/ramips/dts/NA930.dts b/target/linux/ramips/dts/NA930.dts
deleted file mode 100644
index 6d85914265..0000000000
--- a/target/linux/ramips/dts/NA930.dts
+++ /dev/null
@@ -1,187 +0,0 @@
-/dts-v1/;
-
-#include "mt7620a.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	compatible = "sercomm,na930", "ralink,mt7620a-soc";
-	model = "Sercomm NA930";
-
-	aliases {
-		led-boot = &led_power;
-		led-failsafe = &led_power;
-		led-running = &led_power;
-		led-upgrade = &led_power;
-	};
-
-	chosen {
-		bootargs = "console=ttyS1,57600";
-	};
-
-	nand {
-		compatible = "mtk,mt7620-nand";
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x0 0x20000>;
-				read-only;
-			};
-
-			partition@200000 {
-				label = "factory";
-				reg = <0x200000 0x40000>;
-				read-only;
-			};
-
-			partition@240000 {
-				label = "Config";
-				reg = <0x240000 0x400000>;
-				read-only;
-			};
-
-			partition@640000 {
-				compatible = "denx,uimage";
-				label = "firmware";
-				reg = <0x640000 0x1400000>;
-			};
-		};
-	};
-
-	keys {
-		compatible = "gpio-keys-polled";
-		poll-interval = <20>;
-
-		reset {
-			label = "reset";
-			gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-
-		zwave {
-			label = "zwave";
-			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
-			linux,code = <BTN_0>;
-		};
-
-		wps {
-			label = "wps";
-			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		zwave {
-			label = "na930:blue:zwave";
-			gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
-		};
-
-		status {
-			label = "na930:blue:status";
-			gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
-			trigger-sources = <&ohci_port1>, <&ehci_port1>;
-			linux,default-trigger = "usbport";
-		};
-
-		service {
-			label = "na930:blue:service";
-			gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
-		};
-
-		led_power: power {
-			label = "na930:blue:power";
-			gpios = <&gpio2 29 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio_export {
-		compatible = "gpio-export";
-		#size-cells = <0>;
-
-		telit {
-			gpio-export,name = "telit";
-			gpio-export,output = <1>;
-			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&pinctrl {
-	state_default: pinctrl0 {
-		gpio {
-			ralink,group = "i2c", "rgmii2", "spi", "ephy";
-			ralink,function = "gpio";
-		};
-
-		uartf_gpio {
-			ralink,group = "uartf";
-			ralink,function = "gpio uartf";
-		};
-	};
-};
-
-&uart {
-	status = "okay";
-};
-
-&gpio1 {
-	status = "okay";
-};
-
-&gpio2 {
-	status = "okay";
-};
-
-&ethernet {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&rgmii1_pins &mdio_pins>;
-	mediatek,portmap = "llllw";
-
-	port@4 {
-		status = "okay";
-		phy-handle = <&phy4>;
-		phy-mode = "rgmii";
-	};
-
-	port@5 {
-		status = "okay";
-		phy-handle = <&phy5>;
-		phy-mode = "rgmii";
-	};
-
-	mdio-bus {
-		status = "okay";
-
-		phy4: ethernet-phy@4 {
-			reg = <4>;
-			phy-mode = "rgmii";
-		};
-
-		phy5: ethernet-phy@5 {
-			reg = <5>;
-			phy-mode = "rgmii";
-		};
-	};
-};
-
-&gsw {
-	mediatek,port4 = "gmac";
-};
-
-&ehci {
-	status = "okay";
-};
-
-&ohci {
-	status = "okay";
-};
-- 
cgit v1.2.3