From ae3ac76e565724e188138dafe38ebeed122e2cf8 Mon Sep 17 00:00:00 2001 From: Mathias Kresin Date: Fri, 23 Dec 2016 08:21:31 +0100 Subject: ramips: use destinct 11AC NAS board name Use a distinct board name even if the board is near to identical to the WeVO W2914NS v2. To make sure that a 11AC NAS image can not be installed on a WeVO W2914NS v2, both board need to use different names. Signed-off-by: Mathias Kresin --- target/linux/ramips/dts/11ACNAS.dts | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'target/linux/ramips/dts/11ACNAS.dts') diff --git a/target/linux/ramips/dts/11ACNAS.dts b/target/linux/ramips/dts/11ACNAS.dts index 55678f532b..8be9869db9 100644 --- a/target/linux/ramips/dts/11ACNAS.dts +++ b/target/linux/ramips/dts/11ACNAS.dts @@ -9,4 +9,18 @@ device_type = "memory"; reg = <0x0 0x10000000>; }; + + gpio-leds { + compatible = "gpio-leds"; + + // Only USB LED is connected to GPIO. + // All of other LEDs are connected directly to + // switch, WiFi chip, Vcc, so they are not controllable + // via GPIO + + usb { + label = "11acnas:green:usb"; + gpios = <&gpio0 27 GPIO_ACTIVE_LOW>; + }; + }; }; -- cgit v1.2.3