From 38bee61dab029a7608088f64da71c19cfc8cf267 Mon Sep 17 00:00:00 2001
From: Hanqing Wong <hquu@outlook.com>
Date: Sat, 11 Mar 2017 15:44:33 +0800
Subject: ramips: add support for Netgear R6220

This patch adds support for the Netgear R6220, aka Netgear AC1200 and
R6220-100NAS.

Specification:
- SoC: MediaTek MT7621ST (880 MHz)
- Falsh: 128 MiB (Macronix MX30LF1G08AA-TI)
- RAM: 128 MiB (Nanya NT5CB64M16FP-DH)
- Wireless: MediaTek MT7603EN b/g/n , MediaTek MT7612EN an+ac
- LAN speed: 10/100/1000
- LAN ports: 4
- WAN speed: 10/100/1000
- WAN ports: 1
- Serial baud rate of Bootloader and factory firmware: 57600

Installation through telnet:
- Copy kernel.bin and rootfs.bin to a USB flash disk, plug to usb port
  on the router.
- Enable telnet with link: http://192.168.1.1/setup.cgi?todo=debug
  (login if required, default: admin password)
- You will see "Debug Enabled!"
- Telnet 192.168.1.1 and login with "root"
- ls /mnt/shares/ to find out path of your USB disk. 'myUdisk' for
  example.
- cd /mnt/shares/myUdisk
- mtd_write write rootfs.bin Rootfs
- mtd_write write kernel.bin Kernel
- reboot

nmrpflash can be used to recover to the netgear firmware if a broken
image was flashed.

Signed-off-by: Hanqing Wong <hquu@outlook.com>
---
 target/linux/ramips/base-files/etc/board.d/01_leds     | 5 +++++
 target/linux/ramips/base-files/etc/board.d/02_network  | 5 +++++
 target/linux/ramips/base-files/etc/diag.sh             | 1 +
 target/linux/ramips/base-files/lib/ramips.sh           | 3 +++
 target/linux/ramips/base-files/lib/upgrade/platform.sh | 4 +++-
 5 files changed, 17 insertions(+), 1 deletion(-)

(limited to 'target/linux/ramips/base-files')

diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
index e01ba5f602..66f0c97437 100755
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -291,6 +291,11 @@ px-4885)
 	set_wifi_led "$board:orange:wifi"
 	set_usb_led "$board:blue:storage"
 	;;
+r6220)
+	ucidef_set_led_netdev "wan" "wan" "$board:green:wan" eth0.2
+	set_wifi_led "$board:green:wifi"
+	set_usb_led "$board:green:usb"
+	;;
 re6500)
 	ucidef_set_led_default "power" "power" "$board:white:power" "1"
 	ucidef_set_led_default "wifi" "wifi" "$board:orange:wifi" "1"
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index 9d3a9de292..828f461c4f 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -95,6 +95,7 @@ ramips_setup_interfaces()
 	pbr-m1|\
 	psg1208|\
 	psg1218|\
+	r6220|\
 	sap-g3200u3|\
 	sk-wb8|\
 	vr500|\
@@ -394,6 +395,10 @@ ramips_setup_macs()
 		lan_mac=$(mtd_get_mac_binary factory 40)
 		wan_mac=$(mtd_get_mac_binary factory 46)
 		;;
+	r6220)
+		wan_mac=$(mtd_get_mac_binary factory 4)
+		lan_mac=$(macaddr_add "$wan_mac" 1)
+		;;
 	rt-n56u)
 		lan_mac=$(cat /sys/class/net/eth0/address)
 		lan_mac=$(macaddr_setbit_la "$lan_mac")
diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index 54961371f8..3bdd2cf1c1 100644
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -33,6 +33,7 @@ get_status_led() {
 	nbg-419n|\
 	nbg-419n2|\
 	pwh2004|\
+	r6220|\
 	vr500|\
 	wnce2001|\
 	wndr3700v5|\
diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index 91ce5fbd49..cdebab47cd 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -412,6 +412,9 @@ ramips_board_detect() {
 	*"Q7")
 		name="zte-q7"
 		;;
+	*"R6220")
+		name="r6220"
+		;;
 	*"RB750Gr3")
 		name="rb750gr3"
 		;;
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index 3245e2c1c8..7b12d97a00 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -229,7 +229,8 @@ platform_check_image() {
 		}
 		return 0
 		;;
-	hc5962)
+	hc5962|\
+	r6220)
 		# these boards use metadata images
 		return 0
 		;;
@@ -266,6 +267,7 @@ platform_pre_upgrade() {
 
 	case "$board" in
 	hc5962|\
+	r6220|\
     	ubnt-erx)
 		nand_do_upgrade "$ARGV"
 		;;
-- 
cgit v1.2.3