From 5f6e94855113b0c37fba57eda4af0b0427457b98 Mon Sep 17 00:00:00 2001 From: Roger Pueyo Centelles Date: Sun, 6 Nov 2016 13:00:38 +0100 Subject: ramips: Add support for Wavlink WL-WN575A3 This commit adds support for the Wavlink WL-WN575A3, a dual-band wall-plug wireless router with the following specifications: - CPU: MediaTek MT7628AN 580MHz - Flash: 8MB - RAM: 64MB - Ethernet: 2x 10/100 Mbps (switched) - 2.4 GHz: 802.11b/g/n SoC, MIMO 2x2, 20 dBm - 5 GHz: 802.11a/n/ac MT7612E, MIMO 2x2, 20 dBm - Antennas: 4x external (2 per radio), non-detachable - LEDs: 4 programmable + LAN, WAN, POWER - Buttons: reset, WPS Flashing instructions: Factory U-boot launches a TFTP client if WPS button is pressed during power-on. Rename the sysupgrade file and configure a TFTP as follows: - Client (WL-WN575A3) IP: 192.168.10.101 - Server IP: 192.168.10.100 - Filename: firmware.bin Signed-off-by: Roger Pueyo Centelles --- target/linux/ramips/base-files/lib/ramips.sh | 3 +++ target/linux/ramips/base-files/lib/upgrade/platform.sh | 1 + 2 files changed, 4 insertions(+) (limited to 'target/linux/ramips/base-files/lib') diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index 50bdffc5fa..2560eb7c6a 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -499,6 +499,9 @@ ramips_board_detect() { *"WL-351 v1 002") name="wl-351" ;; + *"WL-WN575A3") + name="wl-wn575a3" + ;; *"WLI-TX4-AG300N") name="wli-tx4-ag300n" ;; diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index da496e8ab5..7f161f5342 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -145,6 +145,7 @@ platform_check_image() { wl-330n3g|\ wl-341v3|\ wl-351|\ + wl-wn575a3|\ wli-tx4-ag300n|\ wmr-300|\ wnce2001|\ -- cgit v1.2.3