From 38bee61dab029a7608088f64da71c19cfc8cf267 Mon Sep 17 00:00:00 2001 From: Hanqing Wong Date: Sat, 11 Mar 2017 15:44:33 +0800 Subject: ramips: add support for Netgear R6220 This patch adds support for the Netgear R6220, aka Netgear AC1200 and R6220-100NAS. Specification: - SoC: MediaTek MT7621ST (880 MHz) - Falsh: 128 MiB (Macronix MX30LF1G08AA-TI) - RAM: 128 MiB (Nanya NT5CB64M16FP-DH) - Wireless: MediaTek MT7603EN b/g/n , MediaTek MT7612EN an+ac - LAN speed: 10/100/1000 - LAN ports: 4 - WAN speed: 10/100/1000 - WAN ports: 1 - Serial baud rate of Bootloader and factory firmware: 57600 Installation through telnet: - Copy kernel.bin and rootfs.bin to a USB flash disk, plug to usb port on the router. - Enable telnet with link: http://192.168.1.1/setup.cgi?todo=debug (login if required, default: admin password) - You will see "Debug Enabled!" - Telnet 192.168.1.1 and login with "root" - ls /mnt/shares/ to find out path of your USB disk. 'myUdisk' for example. - cd /mnt/shares/myUdisk - mtd_write write rootfs.bin Rootfs - mtd_write write kernel.bin Kernel - reboot nmrpflash can be used to recover to the netgear firmware if a broken image was flashed. Signed-off-by: Hanqing Wong --- target/linux/ramips/base-files/lib/ramips.sh | 3 +++ target/linux/ramips/base-files/lib/upgrade/platform.sh | 4 +++- 2 files changed, 6 insertions(+), 1 deletion(-) (limited to 'target/linux/ramips/base-files/lib') diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index 91ce5fbd49..cdebab47cd 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -412,6 +412,9 @@ ramips_board_detect() { *"Q7") name="zte-q7" ;; + *"R6220") + name="r6220" + ;; *"RB750Gr3") name="rb750gr3" ;; diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index 3245e2c1c8..7b12d97a00 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -229,7 +229,8 @@ platform_check_image() { } return 0 ;; - hc5962) + hc5962|\ + r6220) # these boards use metadata images return 0 ;; @@ -266,6 +267,7 @@ platform_pre_upgrade() { case "$board" in hc5962|\ + r6220|\ ubnt-erx) nand_do_upgrade "$ARGV" ;; -- cgit v1.2.3