From 6f008af3f0b30d2af21ad6934c17b0ae69103ecd Mon Sep 17 00:00:00 2001 From: Daniel Kucera Date: Sun, 19 Feb 2017 09:46:44 +0100 Subject: ramips: add support for Kimax U25AWF-H1 Kimax U-25AWF-H1 is is a 2,5" HDD Enclosure with Wi-Fi/Eth conection and battery, based on MediaTek MT7620A. Patch rewritten from: https://forum.openwrt.org/viewtopic.php?pid=305643 Specification: - MT7620A CPU - 64 MB of RAM - 16 MB of FLASH - 802.11bgn WiFi - 1x 10/100 Mbps Ethernet - USB 2.0 Host - UART for serial console Flash instruction: 1. Download lede-ramips-mt7620-u25awf-h1-squashfs-sysupgrade.bin 2. Open webinterface a upgrade 3. After boot connect via ethernet to ip 192.168.1.1 Signed-off-by: Daniel Kucera [fix reset button gpio, don't add a lan/wan vlan config for single port board, add -H1 suffix do make sure that this revision of the board is supported/tested] Signed-off-by: Mathias Kresin --- target/linux/ramips/base-files/lib/ramips.sh | 3 +++ 1 file changed, 3 insertions(+) (limited to 'target/linux/ramips/base-files/lib/ramips.sh') diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index d0b9bb1262..07e776cb0c 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -505,6 +505,9 @@ ramips_board_detect() { *"TL-WR841N v13") name="tl-wr841n-v13" ;; + *"U25AWF-H1") + name="u25awf-h1" + ;; *"UBNT-ERX") name="ubnt-erx" ;; -- cgit v1.2.3