From ce93445cd6058ae37ca3d257792f68cd98e758da Mon Sep 17 00:00:00 2001 From: INAGAKI Hiroshi Date: Thu, 26 Jul 2018 23:24:22 +0900 Subject: ramips: add support for ELECOM WRC-2533GST MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit ELECOM WRC-2533GST is a 2.4/5 GHz band 11ac rotuer, based on MediaTek MT7621A. Specification: - MT7621A (2-Core, 4-Threads) - 128 MB of RAM (DDR3) - 16 MB of Flash (SPI) - 4T4R 2.4/5 GHz wifi - MediaTek MT7615 - 5x 10/100/1000 Mbps Ethernet - 4x LEDs, 6 keys (2x buttons, 1x slide switch) - UART header on PCB - Vcc, GND, TX, RX from ethernet port side - baudrate: 57600 bps Flash instruction using factory image: 1. Connect the computer to the LAN port of WRC-2533GST 2. Connect power cable to WRC-2533GST and turn on it 3. Access to "https://192.168.2.1/" and open firmware update page ("ファームウェア更新") 4. Select the OpenWrt factory image and click apply ("適用") button 5. Wait ~150 seconds to complete flashing Signed-off-by: INAGAKI Hiroshi --- target/linux/ramips/base-files/etc/board.d/02_network | 2 ++ 1 file changed, 2 insertions(+) (limited to 'target/linux/ramips/base-files/etc') diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index 818a919f41..7d5f09c35c 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -232,6 +232,7 @@ ramips_setup_interfaces() ;; dir-860l-b1|\ elecom,wrc-1167ghbk2-s|\ + elecom,wrc-2533gst|\ iodata,wn-ax1167gr|\ iodata,wn-gx300gr) ucidef_add_switch "switch0" \ @@ -466,6 +467,7 @@ ramips_setup_macs() wan_mac=$(mtd_get_mac_ascii config WAN_MAC_ADDR) ;; elecom,wrc-1167ghbk2-s|\ + elecom,wrc-2533gst|\ sk-wb8) wan_mac=$(mtd_get_mac_binary factory 57350) ;; -- cgit v1.2.3