From 80a94aacaf8ce67d7a6f0f4342292c4a427ec838 Mon Sep 17 00:00:00 2001 From: Zheng Qian Date: Thu, 29 Mar 2018 18:33:02 +0800 Subject: ramips: add support for the YouHua WR1200JS YouHua tech WR1200JS is an AC1200 router with 5 1Gb ports (4 Lan, 1 Wan) and 1 USB 2.0 port. Devices is base on MediaTek MT7621AT + MT7603E + MT7612E. Specification: - MT7612AT (880 MHz) - 128 MB of RAM - 16 MB of FLASH (SPI NOR) - 5x 10/100/1000 Mbps Ethernet - 2T2R 2.4 GHz (MT7603E) - 2T2R 5 GHz (MT7612E) - 1x USB 2.0 - 10x LED (Power 2G 5G WPS Internet LAN4-1 USB) - 3x button (reset wifi wps) - DC jack for main power input (12V) Installation: 1.) Press reset key 5 sec and restore the factory default 2.) Login webUI and change username to root and set a new password 3.) Visit http://192.168.2.254/adm/telnetd.shtml and turn on the telnet service 4.) Copy openwrt-ramips-mt7621-youhua_wr1200js-initramfs-kernel.bin to a usb pan 5.) Plug the usb pan to the router, telnet to the router and login by root 6.) cd /media/sda1 and check the initramfs file is there 7.) exec command: mtd_write write openwrt-ramips-mt7621-youhua_wr1200js-initramfs-kernel.bin Kernel 8.) reboot and visit 192.168.1.1 Signed-off-by: Zheng Qian --- target/linux/ramips/base-files/etc/board.d/01_leds | 5 +++++ target/linux/ramips/base-files/etc/board.d/02_network | 1 + target/linux/ramips/base-files/etc/diag.sh | 3 ++- 3 files changed, 8 insertions(+), 1 deletion(-) (limited to 'target/linux/ramips/base-files/etc') diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds index a34abbb69f..1a8e37623e 100755 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -495,6 +495,11 @@ y1s) ucidef_set_led_netdev "wifi5g" "WIFI5G" "$boardname:blue:wifi" "wlan0" ucidef_set_led_netdev "wan" "WAN" "$boardname:blue:internet" "eth0.2" "tx rx" ;; +youhua,wr1200js) + ucidef_set_led_switch "internet" "INTERNET" "$boardname:green:wan" "switch0" "0x01" + ucidef_set_led_usbdev "usb" "USB" "$boardname:blue:usb" "1-2" + ucidef_set_led_default "wps" "wps" "$boardname:blue:wps" "0" + ;; zbt-ape522ii) ucidef_set_led_netdev "wlan2g4" "wlan1-link" "$boardname:green:wlan2g4" "wlan1" ucidef_set_led_netdev "sys1" "wlan1" "$boardname:green:sys1" "wlan1" "tx rx" diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index 8f3a95d3e3..0f173bc95c 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -210,6 +210,7 @@ ramips_setup_interfaces() wrtnode|\ wrtnode2p | \ wrtnode2r | \ + youhua,wr1200js|\ zbt-wa05) ucidef_add_switch "switch0" \ "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "6@eth0" diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index 7b90f6ba12..cbaa2d663e 100644 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -132,7 +132,8 @@ get_status_led() { status_led="$boardname:yellow:status" ;; cy-swr1100|\ - w502u) + w502u|\ + youhua,wr1200js) status_led="$boardname:blue:wps" ;; d240|\ -- cgit v1.2.3