From 38bee61dab029a7608088f64da71c19cfc8cf267 Mon Sep 17 00:00:00 2001 From: Hanqing Wong Date: Sat, 11 Mar 2017 15:44:33 +0800 Subject: ramips: add support for Netgear R6220 This patch adds support for the Netgear R6220, aka Netgear AC1200 and R6220-100NAS. Specification: - SoC: MediaTek MT7621ST (880 MHz) - Falsh: 128 MiB (Macronix MX30LF1G08AA-TI) - RAM: 128 MiB (Nanya NT5CB64M16FP-DH) - Wireless: MediaTek MT7603EN b/g/n , MediaTek MT7612EN an+ac - LAN speed: 10/100/1000 - LAN ports: 4 - WAN speed: 10/100/1000 - WAN ports: 1 - Serial baud rate of Bootloader and factory firmware: 57600 Installation through telnet: - Copy kernel.bin and rootfs.bin to a USB flash disk, plug to usb port on the router. - Enable telnet with link: http://192.168.1.1/setup.cgi?todo=debug (login if required, default: admin password) - You will see "Debug Enabled!" - Telnet 192.168.1.1 and login with "root" - ls /mnt/shares/ to find out path of your USB disk. 'myUdisk' for example. - cd /mnt/shares/myUdisk - mtd_write write rootfs.bin Rootfs - mtd_write write kernel.bin Kernel - reboot nmrpflash can be used to recover to the netgear firmware if a broken image was flashed. Signed-off-by: Hanqing Wong --- target/linux/ramips/base-files/etc/board.d/01_leds | 5 +++++ target/linux/ramips/base-files/etc/board.d/02_network | 5 +++++ target/linux/ramips/base-files/etc/diag.sh | 1 + 3 files changed, 11 insertions(+) (limited to 'target/linux/ramips/base-files/etc') diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds index e01ba5f602..66f0c97437 100755 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -291,6 +291,11 @@ px-4885) set_wifi_led "$board:orange:wifi" set_usb_led "$board:blue:storage" ;; +r6220) + ucidef_set_led_netdev "wan" "wan" "$board:green:wan" eth0.2 + set_wifi_led "$board:green:wifi" + set_usb_led "$board:green:usb" + ;; re6500) ucidef_set_led_default "power" "power" "$board:white:power" "1" ucidef_set_led_default "wifi" "wifi" "$board:orange:wifi" "1" diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index 9d3a9de292..828f461c4f 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -95,6 +95,7 @@ ramips_setup_interfaces() pbr-m1|\ psg1208|\ psg1218|\ + r6220|\ sap-g3200u3|\ sk-wb8|\ vr500|\ @@ -394,6 +395,10 @@ ramips_setup_macs() lan_mac=$(mtd_get_mac_binary factory 40) wan_mac=$(mtd_get_mac_binary factory 46) ;; + r6220) + wan_mac=$(mtd_get_mac_binary factory 4) + lan_mac=$(macaddr_add "$wan_mac" 1) + ;; rt-n56u) lan_mac=$(cat /sys/class/net/eth0/address) lan_mac=$(macaddr_setbit_la "$lan_mac") diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index 54961371f8..3bdd2cf1c1 100644 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -33,6 +33,7 @@ get_status_led() { nbg-419n|\ nbg-419n2|\ pwh2004|\ + r6220|\ vr500|\ wnce2001|\ wndr3700v5|\ -- cgit v1.2.3