From 19724e28c81e3ff642f09c49f612cd147c54a697 Mon Sep 17 00:00:00 2001 From: Adrian Schmutzler Date: Tue, 22 Oct 2019 12:37:13 +0200 Subject: ramips: split base-files into subtargets While most of the target's contents are split into subtargets, the base-files are maintained for the target as a whole. However, OpenWrt already implements a mechanism that will use (and even prefer) files in the subtargets' directories. This can be exploited to make several scripts subtarget-specific and thus save some space. In certain cases, keeping files in parent (=target) base-files was more convenient, and thus no splitting was performed for those. Note that this will increase overall code lines, but reduce code per subtarget. base-files ipk size reduction: master (mt7621) 60958 B split (mt7620) 46358 B (- 14.3 kiB) split (mt7621) 48759 B (- 11.9 kiB) split (mt76x8) 44948 B (- 15.6 kiB) split (rt288x) 43508 B (- 17.0 kiB) split (rt305x) 45616 B (- 15.0 kiB) split (rt3883) 44176 B (- 16.4 kiB) Run-tested on: GL.iNet GL-MT300N-V2 (mt76x8) D-Link DWR-116 (mt7620) Signed-off-by: Adrian Schmutzler --- .../etc/hotplug.d/firmware/10-rt2x00-eeprom | 47 ---------------------- 1 file changed, 47 deletions(-) delete mode 100644 target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom (limited to 'target/linux/ramips/base-files/etc/hotplug.d') diff --git a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom deleted file mode 100644 index f33ed82f62..0000000000 --- a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom +++ /dev/null @@ -1,47 +0,0 @@ -#!/bin/sh - -[ -e /lib/firmware/$FIRMWARE ] && exit 0 - -. /lib/functions/caldata.sh - -jboot_eeprom_extract() { - local part=$1 - local offset=$2 - local mtd - - mtd=$(find_mtd_part $part) - [ -n "$mtd" ] || \ - caldata_die "no mtd device found for partition $part" - - jboot_config_read -i $mtd -o $offset -e /lib/firmware/$FIRMWARE 2>/dev/null || \ - caldata_die "failed to extract from $mtd" -} - -board=$(board_name) - -case "$FIRMWARE" in -"soc_wmac.eeprom") - case $board in - dlink,dir-510l|\ - dlink,dwr-116-a1|\ - dlink,dwr-118-a1|\ - dlink,dwr-118-a2|\ - dlink,dwr-921-c1|\ - dlink,dwr-922-e2|\ - lava,lr-25g001) - wan_mac=$(jboot_config_read -m -i $(find_mtd_part "config") -o 0xE000) - wifi_mac=$(macaddr_add "$wan_mac" 1) - jboot_eeprom_extract "config" 0xE000 - caldata_patch_mac $wifi_mac 0x4 - ;; - dovado,tiny-ac) - wifi_mac=$(mtd_get_mac_ascii u-boot-env INIC_MAC_ADDR) - caldata_extract "factory" 0x0 0x200 - caldata_patch_mac $wifi_mac 0x4 - ;; - *) - caldata_die "Please define mtd-eeprom in $board DTS file!" - ;; - esac - ;; -esac -- cgit v1.2.3