From 67fced9ba336dd69c5a35aec3157db4b158a9e2d Mon Sep 17 00:00:00 2001 From: Pawel Dembicki Date: Mon, 19 Mar 2018 19:15:29 +0100 Subject: ramips: add support for DLINK DIR-510L MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The DIR-510L Wireless Router are based on the MT7620A SoC. Specification: -MediaTek MT7620A (580 Mhz) -128 MB of RAM -16 MB of FLASH -802.11bgn radio -1x 10/100 Mbps Ethernet -2x internal, non-detachable antennas -UART (J3) header on PCB (57600 8n1) -1x bi-color LED (GPIO-controlled), 2x button -JBOOT bootloader Known issues: -Ethernet port is used as LAN -No communication with charger IC. (uart bitbang needed) Installation: Apply factory image via d-link http web-gui. How to revert to OEM firmware: 1.) Push the reset button and turn on the power. Wait until LED start blinking (~10sec.) 2.) Upload original factory image via JBOOT http (IP: 192.168.123.254) 3.) If http doesn't work, it can be done with curl command: curl -F FN=@XXXXX.bin http://192.168.123.254/upg where XXXXX.bin is name of firmware file. Signed-off-by: Pawel Dembicki [fixed whitespace issue in 10-rt2x00-eeprom] Signed-off-by: Petr Štetiar --- target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom | 1 + 1 file changed, 1 insertion(+) (limited to 'target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom') diff --git a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom index 96a2397191..fc044c123e 100644 --- a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom +++ b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom @@ -54,6 +54,7 @@ board=$(board_name) case "$FIRMWARE" in "soc_wmac.eeprom") case $board in + dlink,dir-510l|\ dlink,dwr-116-a1|\ dlink,dwr-118-a1|\ dlink,dwr-118-a2|\ -- cgit v1.2.3