From 16d6a63f857a4e9eeb1f173e964264d8a06e65eb Mon Sep 17 00:00:00 2001 From: Ademar Arvati Filho Date: Wed, 4 Jul 2018 01:29:36 +0000 Subject: ramips: add support for Blueendless Kimax U35WF Blueendless Kimax U35WF is a 3,5" HDD Enclosure with Wi-Fi and Ethernet Patch rewritten from: https://forum.openwrt.org/viewtopic.php?id=66908 Based on: https://github.com/lede-project/source/pull/965 Specification: - SoC: MediaTek MT7620N - CPU/Speed: 580 MHz - Flash-Chip: KH25L12835F Spi Flash - Flash size: 16 MiB - RAM: 64 MiB - LAN: 1x 100 Mbps Ethernet - WiFi SoC-integrated: 802.11bgn - 1x USB 2.0 - UART: for serial console Installation: 1. Download sysupgrade.bin 2. Open vendor web interface 3. Choose to upgrade firmware 3. After reboot connect via ethernet at 192.168.1.1 Signed-off-by: Ademar Arvati Filho --- target/linux/ramips/base-files/etc/board.d/01_leds | 4 ++++ target/linux/ramips/base-files/etc/board.d/02_network | 1 + 2 files changed, 5 insertions(+) (limited to 'target/linux/ramips/base-files/etc/board.d') diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds index f89b4ea333..6dec7a10a1 100755 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -245,6 +245,10 @@ ht-tm02) ucidef_set_led_netdev "eth" "Ethernet" "$boardname:green:lan" "eth0" set_wifi_led "$boardname:blue:wlan" ;; +kimax,u35wf) + set_wifi_led "$boardname:blue:wifi" + ucidef_set_led_netdev "eth" "ETH" "$boardname:green:eth" "eth0" + ;; kn|\ nbg-419n2) set_usb_led "$boardname:green:usb" diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index f1fa94ec77..818a919f41 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -49,6 +49,7 @@ ramips_setup_interfaces() dcs-930|\ dcs-930l-b1|\ ht-tm02|\ + kimax,u35wf|\ linkits7688 | \ m2m|\ microwrt|\ -- cgit v1.2.3