From 72b58f2eb12ad4aa0c59481d0911dc5e39180eb5 Mon Sep 17 00:00:00 2001 From: John Crispin Date: Wed, 26 Nov 2014 09:00:08 +0000 Subject: add new target 'oxnas' This is the oxnas target previously developed at http://gitorious.org/openwrt-oxnas Basically, this consolidates the changes and addtionas from http://github.org/kref/linux-oxnas into a new OpenWrt hardware target 'oxnas' adding support for PLX Technology NAS7820/NAS7821/NAS7825/... formally known as Oxford Semiconductor OXE810SE/OXE815/OX820/... For now there are 4 supported boards: Cloud Engines Pogoplug V3 (without PCIe) fully supported Cloud Engines Pogoplug Pro (with PCIe) fully supported MitraStar STG-212 aka ZyXEL NSA-212, aka Medion Akoya P89625 / P89636 / P89626 / P89630, aka Medion MD 86407 / MD 86805 / MD 86517 / MD 86587 fully supported, see http://wiki.openwrt.org/toh/medion/md86587 Shuttle KD-20 partially supported (S-ATA driver lacks support for 2nd port) Signed-off-by: Daniel Golle SVN-Revision: 43388 --- .../linux/oxnas/patches-3.18/800-oxnas-ehci.patch | 30 ++++++++++++++++++++++ 1 file changed, 30 insertions(+) create mode 100644 target/linux/oxnas/patches-3.18/800-oxnas-ehci.patch (limited to 'target/linux/oxnas/patches-3.18/800-oxnas-ehci.patch') diff --git a/target/linux/oxnas/patches-3.18/800-oxnas-ehci.patch b/target/linux/oxnas/patches-3.18/800-oxnas-ehci.patch new file mode 100644 index 0000000000..f2221dda88 --- /dev/null +++ b/target/linux/oxnas/patches-3.18/800-oxnas-ehci.patch @@ -0,0 +1,30 @@ +Index: linux-3.18-rc4/drivers/usb/host/Kconfig +=================================================================== +--- linux-3.18-rc4.orig/drivers/usb/host/Kconfig ++++ linux-3.18-rc4/drivers/usb/host/Kconfig +@@ -302,6 +302,13 @@ config USB_OCTEON_EHCI + USB 2.0 device support. All CN6XXX based chips with USB are + supported. + ++config USB_EHCI_OXNAS ++ tristate "OXNAS EHCI Module" ++ depends on USB_EHCI_HCD && ARCH_OXNAS ++ select USB_EHCI_ROOT_HUB_TT ++ ---help--- ++ Enable support for the OX820 SOC's on-chip EHCI controller. ++ + endif # USB_EHCI_HCD + + config USB_OXU210HP_HCD +Index: linux-3.18-rc4/drivers/usb/host/Makefile +=================================================================== +--- linux-3.18-rc4.orig/drivers/usb/host/Makefile ++++ linux-3.18-rc4/drivers/usb/host/Makefile +@@ -44,6 +44,7 @@ obj-$(CONFIG_USB_EHCI_HCD_AT91) += ehci- + obj-$(CONFIG_USB_EHCI_MSM) += ehci-msm.o + obj-$(CONFIG_USB_EHCI_TEGRA) += ehci-tegra.o + obj-$(CONFIG_USB_W90X900_EHCI) += ehci-w90x900.o ++obj-$(CONFIG_USB_EHCI_OXNAS) += ehci-oxnas.o + + obj-$(CONFIG_USB_OXU210HP_HCD) += oxu210hp-hcd.o + obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o -- cgit v1.2.3