From e4eef7e6207078a4987b0e02d2ad4068083cf921 Mon Sep 17 00:00:00 2001 From: Imre Kaloz Date: Fri, 15 Nov 2013 12:23:17 +0000 Subject: replace the TI patch with a smaller patchset Signed-off-by: Imre Kaloz SVN-Revision: 38816 --- ...01-ARM-dts-omap-Add-new-bindings-for-OMAP.patch | 105 +++++++++++++++++++++ 1 file changed, 105 insertions(+) create mode 100644 target/linux/omap/patches-3.12/201-ARM-dts-omap-Add-new-bindings-for-OMAP.patch (limited to 'target/linux/omap/patches-3.12/201-ARM-dts-omap-Add-new-bindings-for-OMAP.patch') diff --git a/target/linux/omap/patches-3.12/201-ARM-dts-omap-Add-new-bindings-for-OMAP.patch b/target/linux/omap/patches-3.12/201-ARM-dts-omap-Add-new-bindings-for-OMAP.patch new file mode 100644 index 0000000000..7dd44772c2 --- /dev/null +++ b/target/linux/omap/patches-3.12/201-ARM-dts-omap-Add-new-bindings-for-OMAP.patch @@ -0,0 +1,105 @@ +On OMAP we have co-processor IPs, memory controllers, +GPIOs which control regulators and power switches to +PMIC, and SoC internal Bus IPs, some or most of which +should either not be reset or idled or both at init. +(In some cases there are erratas which prevent an IP +from being reset) +Have a way to pass this information from DT. + +Update the am33xx/omap4 and omap5 dtsi files with the +new bindings for modules which either should not be +idled. reset or both. A later patch would cleanup the +same information that exists today as part of the hwmod +data files. + +Signed-off-by: Rajendra Nayak + +--- +.../devicetree/bindings/arm/omap/omap.txt | 3 ++- + arch/arm/boot/dts/am33xx.dtsi | 2 ++ + arch/arm/boot/dts/omap4.dtsi | 3 +++ + arch/arm/boot/dts/omap5.dtsi | 2 ++ + 4 files changed, 9 insertions(+), 1 deletion(-) + +diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt +index 91b7049..808c154 100644 +--- a/Documentation/devicetree/bindings/arm/omap/omap.txt ++++ b/Documentation/devicetree/bindings/arm/omap/omap.txt +@@ -21,7 +21,8 @@ Required properties: + Optional properties: + - ti,no_idle_on_suspend: When present, it prevents the PM to idle the module + during suspend. +- ++- ti,no-reset-on-init: When present, the module should not be reset at init ++- ti,no-idle-on-init: When present, the module should not be idled at init + + Example: + +diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi +index f9c5da9..ec33ea0 100644 +--- a/arch/arm/boot/dts/am33xx.dtsi ++++ b/arch/arm/boot/dts/am33xx.dtsi +@@ -607,6 +607,7 @@ + reg = <0x44d00000 0x4000 /* M3 UMEM */ + 0x44d80000 0x2000>; /* M3 DMEM */ + ti,hwmods = "wkup_m3"; ++ ti,no-reset-on-init; + }; + + elm: elm@48080000 { +@@ -637,6 +638,7 @@ + gpmc: gpmc@50000000 { + compatible = "ti,am3352-gpmc"; + ti,hwmods = "gpmc"; ++ ti,no-idle-on-init; + reg = <0x50000000 0x2000>; + interrupts = <100>; + gpmc,num-cs = <7>; +diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi +index 22d9f2b..e8fe797 100644 +--- a/arch/arm/boot/dts/omap4.dtsi ++++ b/arch/arm/boot/dts/omap4.dtsi +@@ -214,6 +214,7 @@ + gpmc,num-cs = <8>; + gpmc,num-waitpins = <4>; + ti,hwmods = "gpmc"; ++ ti,no-idle-on-init; + }; + + uart1: serial@4806a000 { +@@ -492,6 +493,7 @@ + reg = <0x4c000000 0x100>; + interrupts = ; + ti,hwmods = "emif1"; ++ ti,no-idle-on-init; + phy-type = <1>; + hw-caps-read-idle-ctrl; + hw-caps-ll-interface; +@@ -503,6 +505,7 @@ + reg = <0x4d000000 0x100>; + interrupts = ; + ti,hwmods = "emif2"; ++ ti,no-idle-on-init; + phy-type = <1>; + hw-caps-read-idle-ctrl; + hw-caps-ll-interface; +diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi +index 7cdea1b..a9d49df 100644 +--- a/arch/arm/boot/dts/omap5.dtsi ++++ b/arch/arm/boot/dts/omap5.dtsi +@@ -607,6 +607,7 @@ + emif1: emif@0x4c000000 { + compatible = "ti,emif-4d5"; + ti,hwmods = "emif1"; ++ ti,no-idle-on-init; + phy-type = <2>; /* DDR PHY type: Intelli PHY */ + reg = <0x4c000000 0x400>; + interrupts = ; +@@ -618,6 +619,7 @@ + emif2: emif@0x4d000000 { + compatible = "ti,emif-4d5"; + ti,hwmods = "emif2"; ++ ti,no-idle-on-init; + phy-type = <2>; /* DDR PHY type: Intelli PHY */ + reg = <0x4d000000 0x400>; + interrupts = ; -- cgit v1.2.3