From eadb1a943744997a8685c6de97a25d60d258af85 Mon Sep 17 00:00:00 2001 From: Donald Hoskins Date: Wed, 22 Jul 2020 05:26:33 -0400 Subject: octeon: add support for Itus Shield Router Itus Networks Shield - 1Ghz dual-core mips64 / Cavium Octeon 3 SoC, 1Gb RAM, 4Gb eMMC,3 GbE 10/100/1000 ports Information regarding device can be found: https://deviwiki.com/wiki/Itus_Networks_Shield_Pro Installing OpenWrt on Itus Networks Shield: 1) Boot Shield 2) On device: mount /dev/mmcblk1p1 /mnt 3) scp openwrt-octeon-itus,shield-router-initramfs-kernel.bin to /mnt/ItusrouterImage 3a) Optionally: scp openwrt-octeon-itus,shield-router-initramfs-kernel.bin to /mnt/ItusgatewayImage to allow you to have an emergency recovery boot in the GATEWAY slot - this slot will have no permament storage and is used for emergency recovery only when booted in the (G)ateway position 4) On device: umount /mnt 5) reboot Once booted, run the sysupgrade via cli or luCi on the openwrt-octeon-itus,shield-router-squashfs-sysupgrade.tar file the mode you are running. Once rebooted, the system installation is complete. Your storage partition for the mode is inialized and set. Signed-off-by: Donald Hoskins [cut out sysupgrade-* changes, move a few lines, drop case CVMX_BOARD_TYPE_ITUS_SHIELD] Signed-off-by: Adrian Schmutzler --- target/linux/octeon/base-files/etc/board.d/01_network | 3 +++ 1 file changed, 3 insertions(+) (limited to 'target/linux/octeon/base-files/etc') diff --git a/target/linux/octeon/base-files/etc/board.d/01_network b/target/linux/octeon/base-files/etc/board.d/01_network index f5c8175c54..c1b614f601 100755 --- a/target/linux/octeon/base-files/etc/board.d/01_network +++ b/target/linux/octeon/base-files/etc/board.d/01_network @@ -8,6 +8,9 @@ board_config_update case "$(board_name)" in +itus,shield-router) + ucidef_set_interfaces_lan_wan "eth1 eth2" "eth0" + ;; *) ucidef_set_interfaces_lan_wan "eth0" "eth1" ;; -- cgit v1.2.3