From ab7cabd09df542cf3558725573c2ef2cf1c7cdff Mon Sep 17 00:00:00 2001 From: Stijn Segers Date: Fri, 29 Jun 2018 22:29:06 +0200 Subject: kernel: bump 4.14 to 4.14.52 for 18.06 Compile-tested on: ramips/mt7621, x86/64. Run-tested on: ramips/mt7621. Signed-off-by: Stijn Segers --- .../531-ATA-ahci_mvebu-pmp-stop-errata-226.patch | 110 --------------------- 1 file changed, 110 deletions(-) delete mode 100644 target/linux/mvebu/patches-4.14/531-ATA-ahci_mvebu-pmp-stop-errata-226.patch (limited to 'target/linux/mvebu/patches-4.14/531-ATA-ahci_mvebu-pmp-stop-errata-226.patch') diff --git a/target/linux/mvebu/patches-4.14/531-ATA-ahci_mvebu-pmp-stop-errata-226.patch b/target/linux/mvebu/patches-4.14/531-ATA-ahci_mvebu-pmp-stop-errata-226.patch deleted file mode 100644 index e71cc0c49f..0000000000 --- a/target/linux/mvebu/patches-4.14/531-ATA-ahci_mvebu-pmp-stop-errata-226.patch +++ /dev/null @@ -1,110 +0,0 @@ -From daa2e3bdbb0b3e691cf20a042350817310cb8cb5 Mon Sep 17 00:00:00 2001 -From: Evan Wang -Date: Fri, 13 Apr 2018 12:32:31 +0800 -Subject: [PATCH] ata: ahci: mvebu: override ahci_stop_engine for mvebu AHCI - -There is an issue(Errata Ref#226) that the SATA can not be -detected via SATA Port-MultiPlayer(PMP) with following -error log: - ata1.15: PMP product ID mismatch - ata1.15: SATA link up 6.0 Gbps (SStatus 133 SControl 300) - ata1.15: Port Multiplier vendor mismatch '0x1b4b'!='0x0' - ata1.15: PMP revalidation failed (errno=-19) - -After debugging, the reason is found that the value Port-x -FIS-based Switching Control(PxFBS@0x40) become wrong. -According to design, the bits[11:8, 0] of register PxFBS -are cleared when Port Command and Status (0x18) bit[0] -changes its value from 1 to 0, i.e. falling edge of Port -Command and Status bit[0] sends PULSE that resets PxFBS -bits[11:8; 0]. -So it needs a mvebu SATA WA to save the port PxFBS register -before PxCMD ST write and restore it afterwards. - -This patch implements the WA in a separate function of -ahci_mvebu_stop_engine to override ahci_stop_gngine. - -Signed-off-by: Evan Wang -Cc: Ofer Heifetz -Cc: Tejun Heo -Cc: Thomas Petazzoni -Signed-off-by: Tejun Heo ---- - drivers/ata/ahci_mvebu.c | 56 ++++++++++++++++++++++++++++++++++++++++++++++++ - 1 file changed, 56 insertions(+) - -diff --git a/drivers/ata/ahci_mvebu.c b/drivers/ata/ahci_mvebu.c -index de7128d81e9cc..0045dacd814b4 100644 ---- a/drivers/ata/ahci_mvebu.c -+++ b/drivers/ata/ahci_mvebu.c -@@ -62,6 +62,60 @@ static void ahci_mvebu_regret_option(struct ahci_host_priv *hpriv) - writel(0x80, hpriv->mmio + AHCI_VENDOR_SPECIFIC_0_DATA); - } - -+/** -+ * ahci_mvebu_stop_engine -+ * -+ * @ap: Target ata port -+ * -+ * Errata Ref#226 - SATA Disk HOT swap issue when connected through -+ * Port Multiplier in FIS-based Switching mode. -+ * -+ * To avoid the issue, according to design, the bits[11:8, 0] of -+ * register PxFBS are cleared when Port Command and Status (0x18) bit[0] -+ * changes its value from 1 to 0, i.e. falling edge of Port -+ * Command and Status bit[0] sends PULSE that resets PxFBS -+ * bits[11:8; 0]. -+ * -+ * This function is used to override function of "ahci_stop_engine" -+ * from libahci.c by adding the mvebu work around(WA) to save PxFBS -+ * value before the PxCMD ST write of 0, then restore PxFBS value. -+ * -+ * Return: 0 on success; Error code otherwise. -+ */ -+int ahci_mvebu_stop_engine(struct ata_port *ap) -+{ -+ void __iomem *port_mmio = ahci_port_base(ap); -+ u32 tmp, port_fbs; -+ -+ tmp = readl(port_mmio + PORT_CMD); -+ -+ /* check if the HBA is idle */ -+ if ((tmp & (PORT_CMD_START | PORT_CMD_LIST_ON)) == 0) -+ return 0; -+ -+ /* save the port PxFBS register for later restore */ -+ port_fbs = readl(port_mmio + PORT_FBS); -+ -+ /* setting HBA to idle */ -+ tmp &= ~PORT_CMD_START; -+ writel(tmp, port_mmio + PORT_CMD); -+ -+ /* -+ * bit #15 PxCMD signal doesn't clear PxFBS, -+ * restore the PxFBS register right after clearing the PxCMD ST, -+ * no need to wait for the PxCMD bit #15. -+ */ -+ writel(port_fbs, port_mmio + PORT_FBS); -+ -+ /* wait for engine to stop. This could be as long as 500 msec */ -+ tmp = ata_wait_register(ap, port_mmio + PORT_CMD, -+ PORT_CMD_LIST_ON, PORT_CMD_LIST_ON, 1, 500); -+ if (tmp & PORT_CMD_LIST_ON) -+ return -EIO; -+ -+ return 0; -+} -+ - #ifdef CONFIG_PM_SLEEP - static int ahci_mvebu_suspend(struct platform_device *pdev, pm_message_t state) - { -@@ -112,6 +166,8 @@ static int ahci_mvebu_probe(struct platform_device *pdev) - if (rc) - return rc; - -+ hpriv->stop_engine = ahci_mvebu_stop_engine; -+ - if (of_device_is_compatible(pdev->dev.of_node, - "marvell,armada-380-ahci")) { - dram = mv_mbus_dram_info(); - -- cgit v1.2.3