From 42d14ace3e381ec04a7c8fa233eaaff8fa3a0820 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Daniel=20Gonz=C3=A1lez=20Cabanelas?= Date: Fri, 28 Aug 2020 11:20:46 +0200 Subject: mvebu: LS421DE: add linkstation poweroff driver MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Compile the Linkstation poweroff module for the Buffalo LS421DE. Without this driver the device remains forever halted if a power off command is executed. The driver will also allow to use the WoL feature, which wasn't availabe in the stock firmware. Signed-off-by: Daniel González Cabanelas --- .../files/arch/arm/boot/dts/armada-370-buffalo-ls421de.dts | 13 ------------- 1 file changed, 13 deletions(-) (limited to 'target/linux/mvebu/files/arch/arm/boot/dts/armada-370-buffalo-ls421de.dts') diff --git a/target/linux/mvebu/files/arch/arm/boot/dts/armada-370-buffalo-ls421de.dts b/target/linux/mvebu/files/arch/arm/boot/dts/armada-370-buffalo-ls421de.dts index ea392f9e41..e0c0cb55a0 100644 --- a/target/linux/mvebu/files/arch/arm/boot/dts/armada-370-buffalo-ls421de.dts +++ b/target/linux/mvebu/files/arch/arm/boot/dts/armada-370-buffalo-ls421de.dts @@ -209,12 +209,6 @@ gpio = <&gpio0 9 GPIO_ACTIVE_HIGH>; }; }; - - /* FIXME: this driver needs to be aware of the LED2 eth phy use, - which must be set to off state before shutting down the machine */ - restart_poweroff { - compatible = "restart-poweroff"; - }; }; ð1 { @@ -243,13 +237,6 @@ ethphy0: ethernet-phy@0 { /* Marvell 88E1518 */ reg = <0>; - /* - * LED2 is used to inform, at restart time, if the power - * switch was slided to the "off" position. - * Page 0x3, Register 0x10, bits 8-11: - * 0x800: LED2 off, power off the machine - * 0x900: LED2 on, boot the machine - */ marvell,reg-init = <0x3 0x10 0x1 0x1991>, /* LED function */ <0x3 0x11 0x1 0x4401>, /* LED polarity */ <0x3 0x12 0x1 0x4905>; /* LED timer */ -- cgit v1.2.3