From 788a0cf15c0c62a3b80fde966f7de7037c2dceb7 Mon Sep 17 00:00:00 2001 From: David Bauer Date: Sat, 18 Feb 2023 02:06:54 +0100 Subject: mpc85xx: add support for Watchguard Firebox T10 Hardware -------- SoC: Freescale P1010 RAM: 512MB FLASH: 1 MB SPI-NOR 512 MB NAND ETH: 3x Gigabite Ethernet (Atheros AR8033) SERIAL: Cisco RJ-45 (115200 8N1) RTC: Battery-Backed RTC (I2C) Installation ------------ 1. Patch U-Boot by dumping the content of the SPI-Flash using a SPI programmer. The SHA1 hash for the U-Boot password is currently unknown. A tool for patching U-Boot is available at https://github.com/blocktrron/t10-uboot-patcher/ You can also patch the unknown password yourself. The SHA1 hash is E597301A1D89FF3F6D318DBF4DBA0A5ABC5ECBEA 2. Interrupt the bootmenu by pressing CTRL+C. A password prompt appears. The patched password is '1234' (without quotation marks) 3. Download the OpenWrt initramfs image. Copy it to a TFTP server reachable at 10.0.1.13/24 and rename it to uImage. 4. Connect the TFTP server to ethernet port 0 of the Watchguard T10. 5. Download and boot the initramfs image by entering "tftpboot; bootm;" in U-Boot. 6. After OpenWrt booted, create a UBI volume on the old data partition. The "ubi" mtd partition should be mtd7, check this using $ cat /proc/mtd Create a UBI partition by executing $ ubiformat /dev/mtd7 -y 7. Increase the loadable kernel-size of U-Boot by executing $ fw_setenv SysAKernSize 800000 8. Transfer the OpenWrt sysupgrade image to the Watchguard T10 using scp. Install the image by using sysupgrade: $ sysupgrade -n Note: The LAN ports of the T10 are 1 & 2 while 0 is WAN. You might have to change the ethernet-port. 9. OpenWrt should now boot from the internal NAND. Enjoy. Signed-off-by: David Bauer (cherry picked from commit 35f6d795134e9b089c4e763a7f58cba7d4e15e42) --- target/linux/mpc85xx/config-5.10 | 1 + 1 file changed, 1 insertion(+) (limited to 'target/linux/mpc85xx/config-5.10') diff --git a/target/linux/mpc85xx/config-5.10 b/target/linux/mpc85xx/config-5.10 index a8c9ecfa22..4c63527d9d 100644 --- a/target/linux/mpc85xx/config-5.10 +++ b/target/linux/mpc85xx/config-5.10 @@ -256,6 +256,7 @@ CONFIG_THREAD_SHIFT=13 CONFIG_TICK_CPU_ACCOUNTING=y CONFIG_TINY_SRCU=y # CONFIG_TL_WDR4900_V1 is not set +# CONFIG_FIREBOX_T10 is not set # CONFIG_TOOLCHAIN_DEFAULT_CPU is not set # CONFIG_TQM8540 is not set # CONFIG_TQM8541 is not set -- cgit v1.2.3