From c32835ccfe683e8d97c4b68cb7d38a3009e72411 Mon Sep 17 00:00:00 2001 From: Daniel Golle Date: Thu, 10 Feb 2022 14:12:45 +0000 Subject: mt7622: linksys-e8450: enable using mt7531 switch irq Turns out the MT7531 switch IRQ line is connected to GPIO#53 just like on the BPi-R64, so this seems to be part of the reference design and will probably apply to most MT7622+MT7531 boards. Signed-off-by: Daniel Golle --- target/linux/mediatek/dts/mt7622-linksys-e8450.dtsi | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'target/linux/mediatek') diff --git a/target/linux/mediatek/dts/mt7622-linksys-e8450.dtsi b/target/linux/mediatek/dts/mt7622-linksys-e8450.dtsi index 7358b94a8e..047a4a59ef 100644 --- a/target/linux/mediatek/dts/mt7622-linksys-e8450.dtsi +++ b/target/linux/mediatek/dts/mt7622-linksys-e8450.dtsi @@ -144,6 +144,10 @@ switch@0 { compatible = "mediatek,mt7531"; reg = <0>; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&pio>; + interrupts = <53 IRQ_TYPE_LEVEL_HIGH>; reset-gpios = <&pio 54 0>; ports { -- cgit v1.2.3