From 7762c07c88980cff85ec20c12f18cd172260e9d9 Mon Sep 17 00:00:00 2001 From: John Crispin Date: Mon, 8 Jan 2018 15:06:24 +0100 Subject: mediatek: bump to v4.14 This drops support for all the !emmc EVB and adds banannaPi-R2 Also drop mtkhnat until the nftables offoad driver is ready Signed-off-by: John Crispin --- .../0006-reset-mediatek-mt2701-reset-driver.patch | 29 + .../0012-clk-dont-disable-unused-clocks.patch | 21 + .../0027-net-next-mediatek-fix-DQL-support.patch | 94 ++++ ...iatek-add-support-for-GMAC2-wired-to-ext-.patch | 28 + .../mediatek/patches-4.14/0033-dsa-multi-cpu.patch | 278 ++++++++++ ...5-net-mediatek-disable-RX-VLan-offloading.patch | 47 ++ ...diatek-honour-special-tag-bit-inside-RX-D.patch | 50 ++ ...diatek-enable-special-tag-indication-for-.patch | 41 ++ ...a-mediatek-tell-GDMA-when-we-are-turning-.patch | 43 ++ ...et-dsa-mediatek-turn-into-platform-driver.patch | 81 +++ .../0046-net-mediatek-add-irq-delay.patch | 23 + .../0048-net-core-add-RPS-balancer.patch | 90 ++++ .../0051-net-mediatek-increase-tx_timeout.patch | 21 + .../patches-4.14/0052-net-phy-add-FC.patch | 21 + .../mediatek/patches-4.14/0062-mdio-atomic.patch | 14 + .../mediatek/patches-4.14/0063-atomic-sleep.patch | 48 ++ target/linux/mediatek/patches-4.14/0064-dts.patch | 597 +++++++++++++++++++++ 17 files changed, 1526 insertions(+) create mode 100644 target/linux/mediatek/patches-4.14/0006-reset-mediatek-mt2701-reset-driver.patch create mode 100644 target/linux/mediatek/patches-4.14/0012-clk-dont-disable-unused-clocks.patch create mode 100644 target/linux/mediatek/patches-4.14/0027-net-next-mediatek-fix-DQL-support.patch create mode 100644 target/linux/mediatek/patches-4.14/0032-net-dsa-mediatek-add-support-for-GMAC2-wired-to-ext-.patch create mode 100644 target/linux/mediatek/patches-4.14/0033-dsa-multi-cpu.patch create mode 100644 target/linux/mediatek/patches-4.14/0035-net-mediatek-disable-RX-VLan-offloading.patch create mode 100644 target/linux/mediatek/patches-4.14/0042-net-next-mediatek-honour-special-tag-bit-inside-RX-D.patch create mode 100644 target/linux/mediatek/patches-4.14/0043-net-next-mediatek-enable-special-tag-indication-for-.patch create mode 100644 target/linux/mediatek/patches-4.14/0044-net-next-dsa-mediatek-tell-GDMA-when-we-are-turning-.patch create mode 100644 target/linux/mediatek/patches-4.14/0045-net-dsa-mediatek-turn-into-platform-driver.patch create mode 100644 target/linux/mediatek/patches-4.14/0046-net-mediatek-add-irq-delay.patch create mode 100644 target/linux/mediatek/patches-4.14/0048-net-core-add-RPS-balancer.patch create mode 100644 target/linux/mediatek/patches-4.14/0051-net-mediatek-increase-tx_timeout.patch create mode 100644 target/linux/mediatek/patches-4.14/0052-net-phy-add-FC.patch create mode 100644 target/linux/mediatek/patches-4.14/0062-mdio-atomic.patch create mode 100644 target/linux/mediatek/patches-4.14/0063-atomic-sleep.patch create mode 100644 target/linux/mediatek/patches-4.14/0064-dts.patch (limited to 'target/linux/mediatek/patches-4.14') diff --git a/target/linux/mediatek/patches-4.14/0006-reset-mediatek-mt2701-reset-driver.patch b/target/linux/mediatek/patches-4.14/0006-reset-mediatek-mt2701-reset-driver.patch new file mode 100644 index 0000000000..770a1a0d76 --- /dev/null +++ b/target/linux/mediatek/patches-4.14/0006-reset-mediatek-mt2701-reset-driver.patch @@ -0,0 +1,29 @@ +From 596c3a7300c0419dba71d58cbd4136e0d1e12a4e Mon Sep 17 00:00:00 2001 +From: Shunli Wang +Date: Tue, 5 Jan 2016 14:30:22 +0800 +Subject: [PATCH 06/57] reset: mediatek: mt2701 reset driver + +In infrasys and perifsys, there are many reset +control bits for kinds of modules. These bits are +used as actual reset controllers to be registered +into kernel's generic reset controller framework. + +Signed-off-by: Shunli Wang +Acked-by: Philipp Zabel +--- + drivers/clk/mediatek/clk-mt2701.c | 4 ++++ + 1 file changed, 4 insertions(+) + +Index: linux-4.14.11/drivers/clk/mediatek/clk-mt2701.c +=================================================================== +--- linux-4.14.11.orig/drivers/clk/mediatek/clk-mt2701.c ++++ linux-4.14.11/drivers/clk/mediatek/clk-mt2701.c +@@ -771,6 +771,8 @@ static void mtk_infrasys_init_early(stru + if (r) + pr_err("%s(): could not register clock provider: %d\n", + __func__, r); ++ ++ mtk_register_reset_controller(node, 2, 0x30); + } + CLK_OF_DECLARE_DRIVER(mtk_infra, "mediatek,mt2701-infracfg", + mtk_infrasys_init_early); diff --git a/target/linux/mediatek/patches-4.14/0012-clk-dont-disable-unused-clocks.patch b/target/linux/mediatek/patches-4.14/0012-clk-dont-disable-unused-clocks.patch new file mode 100644 index 0000000000..ed4111dce3 --- /dev/null +++ b/target/linux/mediatek/patches-4.14/0012-clk-dont-disable-unused-clocks.patch @@ -0,0 +1,21 @@ +From 0e60d2112968ccb2570535bf19fb5020c9b28c08 Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Thu, 7 Apr 2016 07:18:35 +0200 +Subject: [PATCH 12/57] clk: dont disable unused clocks + +Signed-off-by: John Crispin +--- + drivers/clk/clk.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/clk/clk.c ++++ b/drivers/clk/clk.c +@@ -796,7 +796,7 @@ unlock_out: + clk_core_disable_unprepare(core->parent); + } + +-static bool clk_ignore_unused; ++static bool clk_ignore_unused = true; + static int __init clk_ignore_unused_setup(char *__unused) + { + clk_ignore_unused = true; diff --git a/target/linux/mediatek/patches-4.14/0027-net-next-mediatek-fix-DQL-support.patch b/target/linux/mediatek/patches-4.14/0027-net-next-mediatek-fix-DQL-support.patch new file mode 100644 index 0000000000..3431b119c0 --- /dev/null +++ b/target/linux/mediatek/patches-4.14/0027-net-next-mediatek-fix-DQL-support.patch @@ -0,0 +1,94 @@ +From f974e397b806f7b16d11cc1542538616291924f1 Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Sat, 23 Apr 2016 11:57:21 +0200 +Subject: [PATCH 27/57] net-next: mediatek: fix DQL support + +The MTK ethernet core has 2 MACs both sitting on the same DMA ring. The +current code will assign the TX traffic of each MAC to its own DQL. This +results in the amount of data, that DQL says is in the queue incorrect. As +the data from multiple devices is infact enqueued. This makes any decision +based on these value non deterministic. Fix this by tracking all TX +traffic, regardless of the MAC it belongs to in the DQL of all devices +using the DMA. + +Signed-off-by: John Crispin +--- + drivers/net/ethernet/mediatek/mtk_eth_soc.c | 35 +++++++++++++++++------------ + 1 file changed, 21 insertions(+), 14 deletions(-) + +Index: linux-4.14.11/drivers/net/ethernet/mediatek/mtk_eth_soc.c +=================================================================== +--- linux-4.14.11.orig/drivers/net/ethernet/mediatek/mtk_eth_soc.c ++++ linux-4.14.11/drivers/net/ethernet/mediatek/mtk_eth_soc.c +@@ -779,7 +779,16 @@ static int mtk_tx_map(struct sk_buff *sk + WRITE_ONCE(itxd->txd3, (TX_DMA_SWC | TX_DMA_PLEN0(skb_headlen(skb)) | + (!nr_frags * TX_DMA_LS0))); + +- netdev_sent_queue(dev, skb->len); ++ /* we have a single DMA ring so BQL needs to be updated for all devices ++ * sitting on this ring ++ */ ++ for (i = 0; i < MTK_MAC_COUNT; i++) { ++ if (!eth->netdev[i]) ++ continue; ++ ++ netdev_sent_queue(eth->netdev[i], skb->len); ++ } ++ + skb_tx_timestamp(skb); + + ring->next_free = mtk_qdma_phys_to_virt(ring, txd->txd2); +@@ -1076,20 +1085,17 @@ static int mtk_poll_tx(struct mtk_eth *e + struct mtk_tx_dma *desc; + struct sk_buff *skb; + struct mtk_tx_buf *tx_buf; +- unsigned int done[MTK_MAX_DEVS]; +- unsigned int bytes[MTK_MAX_DEVS]; ++ int total = 0, done = 0; ++ unsigned int bytes = 0; + u32 cpu, dma; +- int total = 0, i; +- +- memset(done, 0, sizeof(done)); +- memset(bytes, 0, sizeof(bytes)); ++ int i; + + cpu = mtk_r32(eth, MTK_QTX_CRX_PTR); + dma = mtk_r32(eth, MTK_QTX_DRX_PTR); + + desc = mtk_qdma_phys_to_virt(ring, cpu); + +- while ((cpu != dma) && budget) { ++ while ((cpu != dma) && (done < budget)) { + u32 next_cpu = desc->txd2; + int mac = 0; + +@@ -1106,9 +1112,8 @@ static int mtk_poll_tx(struct mtk_eth *e + break; + + if (skb != (struct sk_buff *)MTK_DMA_DUMMY_DESC) { +- bytes[mac] += skb->len; +- done[mac]++; +- budget--; ++ bytes += skb->len; ++ done++; + } + mtk_tx_unmap(eth, tx_buf); + +@@ -1120,11 +1125,13 @@ static int mtk_poll_tx(struct mtk_eth *e + + mtk_w32(eth, cpu, MTK_QTX_CRX_PTR); + ++ /* we have a single DMA ring so BQL needs to be updated for all devices ++ * sitting on this ring ++ */ + for (i = 0; i < MTK_MAC_COUNT; i++) { +- if (!eth->netdev[i] || !done[i]) ++ if (!eth->netdev[i]) + continue; +- netdev_completed_queue(eth->netdev[i], done[i], bytes[i]); +- total += done[i]; ++ netdev_completed_queue(eth->netdev[i], done, bytes); + } + + if (mtk_queue_stopped(eth) && diff --git a/target/linux/mediatek/patches-4.14/0032-net-dsa-mediatek-add-support-for-GMAC2-wired-to-ext-.patch b/target/linux/mediatek/patches-4.14/0032-net-dsa-mediatek-add-support-for-GMAC2-wired-to-ext-.patch new file mode 100644 index 0000000000..073934d6e1 --- /dev/null +++ b/target/linux/mediatek/patches-4.14/0032-net-dsa-mediatek-add-support-for-GMAC2-wired-to-ext-.patch @@ -0,0 +1,28 @@ +From 52e9ce30a2b3c414e0efb20632fefa7cfc5096e6 Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Thu, 10 Aug 2017 14:44:18 +0200 +Subject: [PATCH 32/57] net: dsa: mediatek: add support for GMAC2 wired to ext + phy + +Signed-off-by: John Crispin +--- + drivers/net/dsa/mt7530.c | 5 +++++ + drivers/net/ethernet/mediatek/mtk_eth_soc.c | 3 +++ + 2 files changed, 8 insertions(+) + +Index: linux-4.14.11/drivers/net/dsa/mt7530.c +=================================================================== +--- linux-4.14.11.orig/drivers/net/dsa/mt7530.c ++++ linux-4.14.11/drivers/net/dsa/mt7530.c +@@ -991,6 +991,11 @@ mt7530_setup(struct dsa_switch *ds) + val = mt7530_read(priv, MT7530_MHWTRAP); + val &= ~MHWTRAP_P6_DIS & ~MHWTRAP_PHY_ACCESS; + val |= MHWTRAP_MANUAL; ++ if (!dsa_is_cpu_port(ds, 5)) { ++ val |= MHWTRAP_P5_DIS; ++ val |= MHWTRAP_P5_MAC_SEL; ++ val |= MHWTRAP_P5_RGMII_MODE; ++ } + mt7530_write(priv, MT7530_MHWTRAP, val); + + /* Enable and reset MIB counters */ diff --git a/target/linux/mediatek/patches-4.14/0033-dsa-multi-cpu.patch b/target/linux/mediatek/patches-4.14/0033-dsa-multi-cpu.patch new file mode 100644 index 0000000000..92f4c98dca --- /dev/null +++ b/target/linux/mediatek/patches-4.14/0033-dsa-multi-cpu.patch @@ -0,0 +1,278 @@ +Index: linux-4.14.14/drivers/net/dsa/mt7530.c +=================================================================== +--- linux-4.14.14.orig/drivers/net/dsa/mt7530.c ++++ linux-4.14.14/drivers/net/dsa/mt7530.c +@@ -670,6 +670,9 @@ static int + mt7530_cpu_port_enable(struct mt7530_priv *priv, + int port) + { ++ u8 port_mask = 0; ++ int i; ++ + /* Enable Mediatek header mode on the cpu port */ + mt7530_write(priv, MT7530_PVC_P(port), + PORT_SPEC_TAG); +@@ -686,8 +689,12 @@ mt7530_cpu_port_enable(struct mt7530_pri + /* CPU port gets connected to all user ports of + * the switch + */ ++ for (i = 0; i < MT7530_NUM_PORTS; i++) ++ if ((priv->ds->enabled_port_mask & BIT(i)) && ++ (dsa_port_upstream_port(priv->ds, i) == port)) ++ port_mask |= BIT(i); + mt7530_write(priv, MT7530_PCR_P(port), +- PCR_MATRIX(priv->ds->enabled_port_mask)); ++ PCR_MATRIX(port_mask)); + + return 0; + } +@@ -697,6 +704,7 @@ mt7530_port_enable(struct dsa_switch *ds + struct phy_device *phy) + { + struct mt7530_priv *priv = ds->priv; ++ u8 upstream = dsa_port_upstream_port(ds, port); + + mutex_lock(&priv->reg_mutex); + +@@ -707,7 +715,7 @@ mt7530_port_enable(struct dsa_switch *ds + * restore the port matrix if the port is the member of a certain + * bridge. + */ +- priv->ports[port].pm |= PCR_MATRIX(BIT(MT7530_CPU_PORT)); ++ priv->ports[port].pm |= PCR_MATRIX(BIT(upstream)); + priv->ports[port].enable = true; + mt7530_rmw(priv, MT7530_PCR_P(port), PCR_MATRIX_MASK, + priv->ports[port].pm); +@@ -770,7 +778,8 @@ mt7530_port_bridge_join(struct dsa_switc + struct net_device *bridge) + { + struct mt7530_priv *priv = ds->priv; +- u32 port_bitmap = BIT(MT7530_CPU_PORT); ++ u8 upstream = dsa_port_upstream_port(ds, port); ++ u32 port_bitmap = BIT(upstream); + int i; + + mutex_lock(&priv->reg_mutex); +@@ -808,6 +817,7 @@ mt7530_port_bridge_leave(struct dsa_swit + struct net_device *bridge) + { + struct mt7530_priv *priv = ds->priv; ++ u8 upstream = dsa_port_upstream_port(ds, port); + int i; + + mutex_lock(&priv->reg_mutex); +@@ -832,8 +842,8 @@ mt7530_port_bridge_leave(struct dsa_swit + */ + if (priv->ports[port].enable) + mt7530_rmw(priv, MT7530_PCR_P(port), PCR_MATRIX_MASK, +- PCR_MATRIX(BIT(MT7530_CPU_PORT))); +- priv->ports[port].pm = PCR_MATRIX(BIT(MT7530_CPU_PORT)); ++ PCR_MATRIX(BIT(upstream))); ++ priv->ports[port].pm = PCR_MATRIX(BIT(upstream)); + + mutex_unlock(&priv->reg_mutex); + } +@@ -908,15 +918,7 @@ err: + static enum dsa_tag_protocol + mtk_get_tag_protocol(struct dsa_switch *ds) + { +- struct mt7530_priv *priv = ds->priv; +- +- if (!dsa_is_cpu_port(ds, MT7530_CPU_PORT)) { +- dev_warn(priv->dev, +- "port not matched with tagging CPU port\n"); +- return DSA_TAG_PROTO_NONE; +- } else { +- return DSA_TAG_PROTO_MTK; +- } ++ return DSA_TAG_PROTO_MTK; + } + + static int +@@ -989,7 +991,7 @@ mt7530_setup(struct dsa_switch *ds) + + /* Enable Port 6 only; P5 as GMAC5 which currently is not supported */ + val = mt7530_read(priv, MT7530_MHWTRAP); +- val &= ~MHWTRAP_P6_DIS & ~MHWTRAP_PHY_ACCESS; ++ val &= ~MHWTRAP_P5_DIS & ~MHWTRAP_P6_DIS & ~MHWTRAP_PHY_ACCESS; + val |= MHWTRAP_MANUAL; + if (!dsa_is_cpu_port(ds, 5)) { + val |= MHWTRAP_P5_DIS; +Index: linux-4.14.14/include/net/dsa.h +=================================================================== +--- linux-4.14.14.orig/include/net/dsa.h ++++ linux-4.14.14/include/net/dsa.h +@@ -185,6 +185,10 @@ struct dsa_port { + u8 stp_state; + struct net_device *bridge_dev; + struct devlink_port devlink_port; ++ ++ struct net_device *ethernet; ++ int upstream; ++ + /* + * Original copy of the master netdev ethtool_ops + */ +@@ -266,6 +270,11 @@ static inline bool dsa_is_normal_port(st + return !dsa_is_cpu_port(ds, p) && !dsa_is_dsa_port(ds, p); + } + ++static inline bool dsa_is_upstream_port(struct dsa_switch *ds, int p) ++{ ++ return dsa_is_cpu_port(ds, p) || dsa_is_dsa_port(ds, p); ++} ++ + static inline u8 dsa_upstream_port(struct dsa_switch *ds) + { + struct dsa_switch_tree *dst = ds->dst; +@@ -282,6 +291,18 @@ static inline u8 dsa_upstream_port(struc + return ds->rtable[dst->cpu_dp->ds->index]; + } + ++static inline u8 dsa_port_upstream_port(struct dsa_switch *ds, int port) ++{ ++ /* ++ * If this port has a specific upstream cpu port, use it, ++ * otherwise use the switch default. ++ */ ++ if (ds->ports[port].upstream) ++ return ds->ports[port].upstream; ++ else ++ return dsa_upstream_port(ds); ++} ++ + typedef int dsa_fdb_dump_cb_t(const unsigned char *addr, u16 vid, + bool is_static, void *data); + struct dsa_switch_ops { +Index: linux-4.14.14/net/dsa/dsa2.c +=================================================================== +--- linux-4.14.14.orig/net/dsa/dsa2.c ++++ linux-4.14.14/net/dsa/dsa2.c +@@ -253,6 +253,8 @@ static int dsa_cpu_port_apply(struct dsa + memset(&port->devlink_port, 0, sizeof(port->devlink_port)); + err = devlink_port_register(ds->devlink, &port->devlink_port, + port->index); ++ if (port->netdev) ++ port->netdev->dsa_ptr = ds->dst; + return err; + } + +@@ -262,6 +264,12 @@ static void dsa_cpu_port_unapply(struct + dsa_cpu_dsa_destroy(port); + port->ds->cpu_port_mask &= ~BIT(port->index); + ++ if (port->netdev) ++ port->netdev->dsa_ptr = NULL; ++ if (port->ethernet) { ++ dev_put(port->ethernet); ++ port->ethernet = NULL; ++ } + } + + static int dsa_user_port_apply(struct dsa_port *port) +@@ -505,10 +513,9 @@ static int dsa_cpu_parse(struct dsa_port + dev_put(ethernet_dev); + } + +- if (!dst->cpu_dp) { ++ if (!dst->cpu_dp) + dst->cpu_dp = port; +- dst->cpu_dp->netdev = ethernet_dev; +- } ++ port->netdev = ethernet_dev; + + /* Initialize cpu_port_mask now for drv->setup() + * to have access to a correct value, just like what +@@ -526,6 +533,29 @@ static int dsa_cpu_parse(struct dsa_port + + dst->rcv = dst->tag_ops->rcv; + ++ dev_hold(ethernet_dev); ++ ds->ports[index].ethernet = ethernet_dev; ++ ds->cpu_port_mask |= BIT(index); ++ ++ return 0; ++} ++ ++static int dsa_user_parse(struct dsa_port *port, u32 index, ++ struct dsa_switch *ds) ++{ ++ struct device_node *cpu_port; ++ const unsigned int *cpu_port_reg; ++ int cpu_port_index; ++ ++ cpu_port = of_parse_phandle(port->dn, "cpu", 0); ++ if (cpu_port) { ++ cpu_port_reg = of_get_property(cpu_port, "reg", NULL); ++ if (!cpu_port_reg) ++ return -EINVAL; ++ cpu_port_index = be32_to_cpup(cpu_port_reg); ++ ds->ports[index].upstream = cpu_port_index; ++ } ++ + return 0; + } + +@@ -533,7 +563,7 @@ static int dsa_ds_parse(struct dsa_switc + { + struct dsa_port *port; + u32 index; +- int err; ++ int err = 0; + + for (index = 0; index < ds->num_ports; index++) { + port = &ds->ports[index]; +@@ -546,6 +576,9 @@ static int dsa_ds_parse(struct dsa_switc + if (err) + return err; + } else { ++ err = dsa_user_parse(port, index, ds); ++ if (err) ++ return err; + /* Initialize enabled_port_mask now for drv->setup() + * to have access to a correct value, just like what + * net/dsa/dsa.c::dsa_switch_setup_one does. +Index: linux-4.14.14/net/dsa/dsa_priv.h +=================================================================== +--- linux-4.14.14.orig/net/dsa/dsa_priv.h ++++ linux-4.14.14/net/dsa/dsa_priv.h +@@ -91,6 +91,8 @@ struct dsa_slave_priv { + + /* TC context */ + struct list_head mall_tc_list; ++ ++ struct net_device *master; + }; + + /* dsa.c */ +@@ -177,6 +179,9 @@ extern const struct dsa_device_ops trail + + static inline struct net_device *dsa_master_netdev(struct dsa_slave_priv *p) + { ++ if (p->master) ++ return p->master; ++ + return p->dp->cpu_dp->netdev; + } + +Index: linux-4.14.14/net/dsa/slave.c +=================================================================== +--- linux-4.14.14.orig/net/dsa/slave.c ++++ linux-4.14.14/net/dsa/slave.c +@@ -1257,7 +1257,7 @@ int dsa_slave_create(struct dsa_port *po + int ret; + + cpu_dp = ds->dst->cpu_dp; +- master = cpu_dp->netdev; ++ master = ds->ports[port->upstream].ethernet; + + if (!ds->num_tx_queues) + ds->num_tx_queues = 1; +@@ -1295,6 +1295,7 @@ int dsa_slave_create(struct dsa_port *po + p->dp = port; + INIT_LIST_HEAD(&p->mall_tc_list); + p->xmit = dst->tag_ops->xmit; ++ p->master = master; + + p->old_pause = -1; + p->old_link = -1; diff --git a/target/linux/mediatek/patches-4.14/0035-net-mediatek-disable-RX-VLan-offloading.patch b/target/linux/mediatek/patches-4.14/0035-net-mediatek-disable-RX-VLan-offloading.patch new file mode 100644 index 0000000000..36321c55cf --- /dev/null +++ b/target/linux/mediatek/patches-4.14/0035-net-mediatek-disable-RX-VLan-offloading.patch @@ -0,0 +1,47 @@ +From 35b83b85e752a6660b92f08c0fb912308f25cf6d Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Thu, 10 Aug 2017 15:56:40 +0200 +Subject: [PATCH 35/57] net: mediatek: disable RX VLan offloading + +Signed-off-by: John Crispin +--- + drivers/net/ethernet/mediatek/mtk_eth_soc.c | 9 ++++++--- + drivers/net/ethernet/mediatek/mtk_eth_soc.h | 2 -- + 2 files changed, 6 insertions(+), 5 deletions(-) + +--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c ++++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c +@@ -643,8 +643,8 @@ static int mtk_tx_map(struct sk_buff *sk + txd4 |= TX_DMA_CHKSUM; + + /* VLAN header offload */ +- if (skb_vlan_tag_present(skb)) +- txd4 |= TX_DMA_INS_VLAN | skb_vlan_tag_get(skb); ++// if (skb_vlan_tag_present(skb)) ++// txd4 |= TX_DMA_INS_VLAN | skb_vlan_tag_get(skb); + + mapped_addr = dma_map_single(eth->dev, skb->data, + skb_headlen(skb), DMA_TO_DEVICE); +@@ -1874,7 +1874,10 @@ static int mtk_hw_init(struct mtk_eth *e + mtk_w32(eth, val | MTK_CDMQ_STAG_EN, MTK_CDMQ_IG_CTRL); + + /* Enable RX VLan Offloading */ +- mtk_w32(eth, 1, MTK_CDMP_EG_CTRL); ++ if (MTK_HW_FEATURES & NETIF_F_HW_VLAN_CTAG_RX) ++ mtk_w32(eth, 1, MTK_CDMP_EG_CTRL); ++ else ++ mtk_w32(eth, 0, MTK_CDMP_EG_CTRL); + + /* disable delay and normal interrupt */ + mtk_w32(eth, 0, MTK_QDMA_DELAY_INT); +--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h ++++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h +@@ -34,8 +34,6 @@ + NETIF_MSG_TX_ERR) + #define MTK_HW_FEATURES (NETIF_F_IP_CSUM | \ + NETIF_F_RXCSUM | \ +- NETIF_F_HW_VLAN_CTAG_TX | \ +- NETIF_F_HW_VLAN_CTAG_RX | \ + NETIF_F_SG | NETIF_F_TSO | \ + NETIF_F_TSO6 | \ + NETIF_F_IPV6_CSUM) diff --git a/target/linux/mediatek/patches-4.14/0042-net-next-mediatek-honour-special-tag-bit-inside-RX-D.patch b/target/linux/mediatek/patches-4.14/0042-net-next-mediatek-honour-special-tag-bit-inside-RX-D.patch new file mode 100644 index 0000000000..4f2c7b2e6e --- /dev/null +++ b/target/linux/mediatek/patches-4.14/0042-net-next-mediatek-honour-special-tag-bit-inside-RX-D.patch @@ -0,0 +1,50 @@ +From a306af3b97c56b9e224a2f9ee04838a2d32ff60b Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Wed, 9 Aug 2017 14:44:07 +0200 +Subject: [PATCH 42/57] net-next: mediatek: honour special tag bit inside RX + DMA descriptor + +For HW NAT/QoS to work the DSA driver needs to turn the special tag bit +inside the ingress control register on. This has the side effect that +the code working out which ingress gmac we have breaks. Fix this by +honouring the special tag bit inside the RX free descriptor. + +Signed-off-by: John Crispin +--- + drivers/net/ethernet/mediatek/mtk_eth_soc.c | 14 ++++++++++---- + drivers/net/ethernet/mediatek/mtk_eth_soc.h | 1 + + 2 files changed, 11 insertions(+), 4 deletions(-) + +--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c ++++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c +@@ -933,10 +933,16 @@ static int mtk_poll_rx(struct napi_struc + if (!(trxd.rxd2 & RX_DMA_DONE)) + break; + +- /* find out which mac the packet come from. values start at 1 */ +- mac = (trxd.rxd4 >> RX_DMA_FPORT_SHIFT) & +- RX_DMA_FPORT_MASK; +- mac--; ++ /* find out which mac the packet comes from. If the special tag is ++ * we can assume that the traffic is coming from the builtin mt7530 ++ * and the DSA driver has loaded. FPORT will be the physical switch ++ * port in this case rather than the FE forward port id. */ ++ if (!(trxd.rxd4 & RX_DMA_SP_TAG)) { ++ /* values start at 1 */ ++ mac = (trxd.rxd4 >> RX_DMA_FPORT_SHIFT) & ++ RX_DMA_FPORT_MASK; ++ mac--; ++ } + + netdev = eth->netdev[mac]; + +--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h ++++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h +@@ -284,6 +284,7 @@ + + /* QDMA descriptor rxd4 */ + #define RX_DMA_L4_VALID BIT(24) ++#define RX_DMA_SP_TAG BIT(22) + #define RX_DMA_FPORT_SHIFT 19 + #define RX_DMA_FPORT_MASK 0x7 + diff --git a/target/linux/mediatek/patches-4.14/0043-net-next-mediatek-enable-special-tag-indication-for-.patch b/target/linux/mediatek/patches-4.14/0043-net-next-mediatek-enable-special-tag-indication-for-.patch new file mode 100644 index 0000000000..2256325c9c --- /dev/null +++ b/target/linux/mediatek/patches-4.14/0043-net-next-mediatek-enable-special-tag-indication-for-.patch @@ -0,0 +1,41 @@ +From 53e3d9af39805a7e1ba81a047a9ab433be0e82f5 Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Wed, 9 Aug 2017 14:56:53 +0200 +Subject: [PATCH 43/57] net-next: mediatek: enable special tag indication for + PDMA + +The Ingress special tag indication was only enabled for QDMA and not PDMA. +Properly initialize the STAG bit. This broke HW NAT and Qos from working +for traffic coming in via a DSA device. The PPE failed to properly parse +the traffic as it was not expecting the special tag. + +Signed-off-by: John Crispin +--- + drivers/net/ethernet/mediatek/mtk_eth_soc.c | 2 ++ + drivers/net/ethernet/mediatek/mtk_eth_soc.h | 4 ++++ + 2 files changed, 6 insertions(+) + +--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c ++++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c +@@ -1894,6 +1894,8 @@ static int mtk_hw_init(struct mtk_eth *e + */ + val = mtk_r32(eth, MTK_CDMQ_IG_CTRL); + mtk_w32(eth, val | MTK_CDMQ_STAG_EN, MTK_CDMQ_IG_CTRL); ++ val = mtk_r32(eth, MTK_CDMP_IG_CTRL); ++ mtk_w32(eth, val | MTK_CDMP_STAG_EN, MTK_CDMP_IG_CTRL); + + /* Enable RX VLan Offloading */ + if (MTK_HW_FEATURES & NETIF_F_HW_VLAN_CTAG_RX) +--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h ++++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h +@@ -76,6 +76,10 @@ + #define MTK_CDMQ_IG_CTRL 0x1400 + #define MTK_CDMQ_STAG_EN BIT(0) + ++/* CDMP Ingress Control Register */ ++#define MTK_CDMP_IG_CTRL 0x400 ++#define MTK_CDMP_STAG_EN BIT(0) ++ + /* CDMP Exgress Control Register */ + #define MTK_CDMP_EG_CTRL 0x404 + diff --git a/target/linux/mediatek/patches-4.14/0044-net-next-dsa-mediatek-tell-GDMA-when-we-are-turning-.patch b/target/linux/mediatek/patches-4.14/0044-net-next-dsa-mediatek-tell-GDMA-when-we-are-turning-.patch new file mode 100644 index 0000000000..51204d4001 --- /dev/null +++ b/target/linux/mediatek/patches-4.14/0044-net-next-dsa-mediatek-tell-GDMA-when-we-are-turning-.patch @@ -0,0 +1,43 @@ +From 6a5932028a4f3217ed7c9d602f269611d95dd8ca Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Wed, 9 Aug 2017 15:13:19 +0200 +Subject: [PATCH 44/57] net-next: dsa: mediatek: tell GDMA when we are turning + on the special tag + +Enabling this bit will make the RX DMA descriptor enable the SP bit for all +ingress traffic inside the return descriptor. The PPE needs this to know +that a SP is present. + +Signed-off-by: John Crispin +--- + drivers/net/dsa/mt7530.c | 5 +++++ + drivers/net/dsa/mt7530.h | 4 ++++ + 2 files changed, 9 insertions(+) + +--- a/drivers/net/dsa/mt7530.c ++++ b/drivers/net/dsa/mt7530.c +@@ -742,6 +742,11 @@ mt7530_cpu_port_enable(struct mt7530_pri + mt7530_write(priv, MT7530_PVC_P(port), + PORT_SPEC_TAG); + ++ /* Enable Mediatek header mode on the GMAC that the cpu port ++ * connects to */ ++ regmap_write_bits(priv->ethernet, MTK_GDMA_FWD_CFG(port), ++ GDMA_SPEC_TAG, GDMA_SPEC_TAG); ++ + /* Setup the MAC by default for the cpu port */ + mt7530_write(priv, MT7530_PMCR_P(port), PMCR_CPUP_LINK); + +--- a/drivers/net/dsa/mt7530.h ++++ b/drivers/net/dsa/mt7530.h +@@ -22,6 +22,10 @@ + + #define TRGMII_BASE(x) (0x10000 + (x)) + ++/* Registers for GDMA configuration access */ ++#define MTK_GDMA_FWD_CFG(x) (0x500 + (x * 0x1000)) ++#define GDMA_SPEC_TAG BIT(24) ++ + /* Registers to ethsys access */ + #define ETHSYS_CLKCFG0 0x2c + #define ETHSYS_TRGMII_CLK_SEL362_5 BIT(11) diff --git a/target/linux/mediatek/patches-4.14/0045-net-dsa-mediatek-turn-into-platform-driver.patch b/target/linux/mediatek/patches-4.14/0045-net-dsa-mediatek-turn-into-platform-driver.patch new file mode 100644 index 0000000000..f9c0a2b5e8 --- /dev/null +++ b/target/linux/mediatek/patches-4.14/0045-net-dsa-mediatek-turn-into-platform-driver.patch @@ -0,0 +1,81 @@ +From 1e33784f665cb95c2af5481d3e776d2d3099921b Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Thu, 10 Aug 2017 15:57:17 +0200 +Subject: [PATCH 45/57] net: dsa: mediatek: turn into platform driver + +Signed-off-by: John Crispin +--- + drivers/net/dsa/mt7530.c | 23 +++++++++++++++-------- + 1 file changed, 15 insertions(+), 8 deletions(-) + +Index: linux-4.14.12/drivers/net/dsa/mt7530.c +=================================================================== +--- linux-4.14.12.orig/drivers/net/dsa/mt7530.c ++++ linux-4.14.12/drivers/net/dsa/mt7530.c +@@ -1049,10 +1049,10 @@ static const struct dsa_switch_ops mt753 + }; + + static int +-mt7530_probe(struct mdio_device *mdiodev) ++mt7530_probe(struct platform_device *mdiodev) + { + struct mt7530_priv *priv; +- struct device_node *dn; ++ struct device_node *dn, *mdio; + + dn = mdiodev->dev.of_node; + +@@ -1100,7 +1100,12 @@ mt7530_probe(struct mdio_device *mdiodev + } + } + +- priv->bus = mdiodev->bus; ++ mdio = of_parse_phandle(dn, "dsa,mii-bus", 0); ++ if (!mdio) ++ return -EINVAL; ++ priv->bus = of_mdio_find_bus(mdio); ++ if (!priv->bus) ++ return -EPROBE_DEFER; + priv->dev = &mdiodev->dev; + priv->ds->priv = priv; + priv->ds->ops = &mt7530_switch_ops; +@@ -1110,8 +1115,8 @@ mt7530_probe(struct mdio_device *mdiodev + return dsa_register_switch(priv->ds); + } + +-static void +-mt7530_remove(struct mdio_device *mdiodev) ++static int ++mt7530_remove(struct platform_device *mdiodev) + { + struct mt7530_priv *priv = dev_get_drvdata(&mdiodev->dev); + int ret = 0; +@@ -1128,6 +1133,8 @@ mt7530_remove(struct mdio_device *mdiode + + dsa_unregister_switch(priv->ds); + mutex_destroy(&priv->reg_mutex); ++ ++ return 0; + } + + static const struct of_device_id mt7530_of_match[] = { +@@ -1135,16 +1142,16 @@ static const struct of_device_id mt7530_ + { /* sentinel */ }, + }; + +-static struct mdio_driver mt7530_mdio_driver = { ++static struct platform_driver mtk_mt7530_driver = { + .probe = mt7530_probe, + .remove = mt7530_remove, +- .mdiodrv.driver = { ++ .driver = { + .name = "mt7530", + .of_match_table = mt7530_of_match, + }, + }; ++module_platform_driver(mtk_mt7530_driver); + +-mdio_module_driver(mt7530_mdio_driver); + + MODULE_AUTHOR("Sean Wang "); + MODULE_DESCRIPTION("Driver for Mediatek MT7530 Switch"); diff --git a/target/linux/mediatek/patches-4.14/0046-net-mediatek-add-irq-delay.patch b/target/linux/mediatek/patches-4.14/0046-net-mediatek-add-irq-delay.patch new file mode 100644 index 0000000000..3c351d345e --- /dev/null +++ b/target/linux/mediatek/patches-4.14/0046-net-mediatek-add-irq-delay.patch @@ -0,0 +1,23 @@ +From 6e081074df96bf3762c2e6438c383f11a56b0a7e Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Thu, 10 Aug 2017 15:58:04 +0200 +Subject: [PATCH 46/57] net: mediatek: add irq delay + +Signed-off-by: John Crispin +--- + drivers/net/ethernet/mediatek/mtk_eth_soc.c | 7 ++++++- + drivers/net/ethernet/mediatek/mtk_eth_soc.h | 8 +++++++- + 2 files changed, 13 insertions(+), 2 deletions(-) + +Index: linux-4.14.11/drivers/net/ethernet/mediatek/mtk_eth_soc.c +=================================================================== +--- linux-4.14.11.orig/drivers/net/ethernet/mediatek/mtk_eth_soc.c ++++ linux-4.14.11/drivers/net/ethernet/mediatek/mtk_eth_soc.c +@@ -1994,6 +1994,7 @@ static int mtk_hw_init(struct mtk_eth *e + + /* enable interrupt delay for RX */ + mtk_w32(eth, MTK_PDMA_DELAY_RX_DELAY, MTK_PDMA_DELAY_INT); ++ //mtk_w32(eth, MTK_PDMA_DELAY_RX_DELAY, MTK_QDMA_DELAY_INT); + + /* disable delay and normal interrupt */ + mtk_w32(eth, 0, MTK_QDMA_DELAY_INT); diff --git a/target/linux/mediatek/patches-4.14/0048-net-core-add-RPS-balancer.patch b/target/linux/mediatek/patches-4.14/0048-net-core-add-RPS-balancer.patch new file mode 100644 index 0000000000..aeb81e14bf --- /dev/null +++ b/target/linux/mediatek/patches-4.14/0048-net-core-add-RPS-balancer.patch @@ -0,0 +1,90 @@ +From 3e969c9695b45e1a052d43b367096ec99f2f0aac Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Thu, 10 Aug 2017 15:58:29 +0200 +Subject: [PATCH 48/57] net: core: add RPS balancer + +Signed-off-by: John Crispin +--- + net/core/dev.c | 57 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++- + 1 file changed, 56 insertions(+), 1 deletion(-) + +--- a/net/core/dev.c ++++ b/net/core/dev.c +@@ -3551,6 +3551,58 @@ set_rps_cpu(struct net_device *dev, stru + return rflow; + } + ++#define RPS_TBL_SIZE_SHIFT 10 ++#define RPS_TBL_SIZE (1 << RPS_TBL_SIZE_SHIFT) ++struct rps_table { ++ int core; ++ struct timer_list expire; ++}; ++static struct rps_table rps_table[RPS_TBL_SIZE]; ++static int rps_table_last_core; ++ ++static void rps_table_expire(unsigned long data) ++{ ++ struct rps_table *entry = (struct rps_table *) data; ++ ++ entry->core = -1; ++} ++ ++static int rps_table_core(struct rps_map *map) ++{ ++ int i; ++ ++ for (i = 0; i < map->len; i++) { ++ int cpu = map->cpus[(rps_table_last_core + i + 1) % map->len]; ++ if (cpu_online(cpu)) { ++ rps_table_last_core = cpu; ++ return cpu; ++ } ++ } ++ return map->cpus[0]; ++} ++ ++static int rps_table_lookup(struct rps_map *map, u32 hash) ++{ ++ int bucket = hash & 0x3ff; ++ ++ if (rps_table[bucket].core < 0) ++ rps_table[bucket].core = rps_table_core(map); ++ mod_timer(&rps_table[bucket].expire, jiffies + HZ); ++ ++ return rps_table[bucket].core; ++} ++ ++static void rps_table_init(void) ++{ ++ int i; ++ ++ for (i = 0; i < RPS_TBL_SIZE; i++) { ++ rps_table[i].core = -1; ++ setup_timer(&rps_table[i].expire, rps_table_expire, ++ (unsigned long) &rps_table[i]); ++ } ++} ++ + /* + * get_rps_cpu is called from netif_receive_skb and returns the target + * CPU from the RPS map of the receiving queue for a given skb. +@@ -3640,7 +3692,7 @@ static int get_rps_cpu(struct net_device + try_rps: + + if (map) { +- tcpu = map->cpus[reciprocal_scale(hash, map->len)]; ++ tcpu = rps_table_lookup(map, hash); + if (cpu_online(tcpu)) { + cpu = tcpu; + goto done; +@@ -8431,6 +8483,9 @@ static int __init net_dev_init(void) + sd->backlog.weight = weight_p; + } + ++ if (IS_ENABLED(CONFIG_RPS)) ++ rps_table_init(); ++ + dev_boot_phase = 0; + + /* The loopback device is special if any other network devices diff --git a/target/linux/mediatek/patches-4.14/0051-net-mediatek-increase-tx_timeout.patch b/target/linux/mediatek/patches-4.14/0051-net-mediatek-increase-tx_timeout.patch new file mode 100644 index 0000000000..3de3e7343b --- /dev/null +++ b/target/linux/mediatek/patches-4.14/0051-net-mediatek-increase-tx_timeout.patch @@ -0,0 +1,21 @@ +From 5cbf53c7e5eac5bacc409461888789accdaf8eec Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Thu, 10 Aug 2017 16:00:06 +0200 +Subject: [PATCH 51/57] net: mediatek: increase tx_timeout + +Signed-off-by: John Crispin +--- + drivers/net/ethernet/mediatek/mtk_eth_soc.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c ++++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c +@@ -2384,7 +2384,7 @@ static int mtk_add_mac(struct mtk_eth *e + mac->hw_stats->reg_offset = id * MTK_STAT_OFFSET; + + SET_NETDEV_DEV(eth->netdev[id], eth->dev); +- eth->netdev[id]->watchdog_timeo = 5 * HZ; ++ eth->netdev[id]->watchdog_timeo = 30 * HZ; + eth->netdev[id]->netdev_ops = &mtk_netdev_ops; + eth->netdev[id]->base_addr = (unsigned long)eth->base; + diff --git a/target/linux/mediatek/patches-4.14/0052-net-phy-add-FC.patch b/target/linux/mediatek/patches-4.14/0052-net-phy-add-FC.patch new file mode 100644 index 0000000000..32d516ce4d --- /dev/null +++ b/target/linux/mediatek/patches-4.14/0052-net-phy-add-FC.patch @@ -0,0 +1,21 @@ +From 18b2169d84b47a3414164e5e40f23fb7e875707c Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Thu, 10 Aug 2017 16:00:28 +0200 +Subject: [PATCH 52/57] net: phy: add FC + +Signed-off-by: John Crispin +--- + drivers/net/phy/phy_device.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/net/phy/phy_device.c ++++ b/drivers/net/phy/phy_device.c +@@ -1804,7 +1804,7 @@ static struct phy_driver genphy_driver[] + .config_init = genphy_config_init, + .features = PHY_GBIT_FEATURES | SUPPORTED_MII | + SUPPORTED_AUI | SUPPORTED_FIBRE | +- SUPPORTED_BNC, ++ SUPPORTED_BNC | SUPPORTED_Pause | SUPPORTED_Asym_Pause, + .config_aneg = genphy_config_aneg, + .aneg_done = genphy_aneg_done, + .read_status = genphy_read_status, diff --git a/target/linux/mediatek/patches-4.14/0062-mdio-atomic.patch b/target/linux/mediatek/patches-4.14/0062-mdio-atomic.patch new file mode 100644 index 0000000000..96e7072a33 --- /dev/null +++ b/target/linux/mediatek/patches-4.14/0062-mdio-atomic.patch @@ -0,0 +1,14 @@ +--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c ++++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c +@@ -97,7 +97,10 @@ static int mtk_mdio_busy_wait(struct mtk + return 0; + if (time_after(jiffies, t_start + PHY_IAC_TIMEOUT)) + break; +- usleep_range(10, 20); ++ if (in_atomic()) ++ udelay(10); ++ else ++ usleep_range(10, 20); + } + + dev_err(eth->dev, "mdio: MDIO timeout\n"); diff --git a/target/linux/mediatek/patches-4.14/0063-atomic-sleep.patch b/target/linux/mediatek/patches-4.14/0063-atomic-sleep.patch new file mode 100644 index 0000000000..de49dacd5f --- /dev/null +++ b/target/linux/mediatek/patches-4.14/0063-atomic-sleep.patch @@ -0,0 +1,48 @@ +Index: linux-4.14.12/drivers/net/ethernet/mediatek/mtk_eth_soc.c +=================================================================== +--- linux-4.14.12.orig/drivers/net/ethernet/mediatek/mtk_eth_soc.c ++++ linux-4.14.12/drivers/net/ethernet/mediatek/mtk_eth_soc.c +@@ -409,6 +409,7 @@ static int mtk_mdio_init(struct mtk_eth + + snprintf(eth->mii_bus->id, MII_BUS_ID_SIZE, "%s", mii_np->name); + ret = of_mdiobus_register(eth->mii_bus, mii_np); ++printk("%s:%s[%d]%d %p\n", __FILE__, __func__, __LINE__, ret, eth->mii_bus); + + err_put_node: + of_node_put(mii_np); +@@ -1472,7 +1473,10 @@ static void mtk_hwlro_rx_uninit(struct m + for (i = 0; i < 10; i++) { + val = mtk_r32(eth, MTK_PDMA_LRO_CTRL_DW0); + if (val & MTK_LRO_RING_RELINQUISH_DONE) { +- msleep(20); ++ if (in_atomic()) ++ mdelay(20); ++ else ++ msleep(20); + continue; + } + break; +@@ -1868,7 +1872,10 @@ static void mtk_stop_dma(struct mtk_eth + for (i = 0; i < 10; i++) { + val = mtk_r32(eth, glo_cfg); + if (val & (MTK_TX_DMA_BUSY | MTK_RX_DMA_BUSY)) { +- msleep(20); ++ if (in_atomic()) ++ mdelay(20); ++ else ++ msleep(20); + continue; + } + break; +@@ -1906,7 +1913,10 @@ static void ethsys_reset(struct mtk_eth + reset_bits, + reset_bits); + +- usleep_range(1000, 1100); ++ if (in_atomic()) ++ udelay(1000); ++ else ++ usleep_range(1000, 1100); + regmap_update_bits(eth->ethsys, ETHSYS_RSTCTRL, + reset_bits, + ~reset_bits); diff --git a/target/linux/mediatek/patches-4.14/0064-dts.patch b/target/linux/mediatek/patches-4.14/0064-dts.patch new file mode 100644 index 0000000000..9120dfc2cd --- /dev/null +++ b/target/linux/mediatek/patches-4.14/0064-dts.patch @@ -0,0 +1,597 @@ +Index: linux-4.14.18/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts +=================================================================== +--- linux-4.14.18.orig/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts ++++ linux-4.14.18/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts +@@ -21,6 +21,10 @@ + stdout-path = "serial2:115200n8"; + }; + ++ memory { ++ reg = <0 0x80000000 0 0x20000000>; ++ }; ++ + cpus { + cpu@0 { + proc-supply = <&mt6323_vproc_reg>; +@@ -84,6 +88,10 @@ + memory@80000000 { + reg = <0 0x80000000 0 0x40000000>; + }; ++ ++ mt7530: switch@0 { ++ compatible = "mediatek,mt7530"; ++ }; + }; + + &cir { +@@ -111,11 +119,24 @@ + }; + }; + ++ gmac1: mac@1 { ++ compatible = "mediatek,eth-mac"; ++ reg = <1>; ++ phy-mode = "rgmii"; ++ ++ fixed-link { ++ speed = <1000>; ++ full-duplex; ++ pause; ++ }; ++ }; ++ + mdio: mdio-bus { + #address-cells = <1>; + #size-cells = <0>; +- +- switch@0 { ++ }; ++}; ++ &mt7530 { + compatible = "mediatek,mt7530"; + #address-cells = <1>; + #size-cells = <0>; +@@ -125,6 +146,8 @@ + core-supply = <&mt6323_vpa_reg>; + io-supply = <&mt6323_vemc3v3_reg>; + ++ dsa,mii-bus = <&mdio>; ++ + ports { + #address-cells = <1>; + #size-cells = <0>; +@@ -133,29 +156,46 @@ + port@0 { + reg = <0>; + label = "wan"; ++ cpu = <&cpu_port1>; + }; + + port@1 { + reg = <1>; + label = "lan0"; ++ cpu = <&cpu_port0>; + }; + + port@2 { + reg = <2>; + label = "lan1"; ++ cpu = <&cpu_port0>; + }; + + port@3 { + reg = <3>; + label = "lan2"; ++ cpu = <&cpu_port0>; + }; + + port@4 { + reg = <4>; + label = "lan3"; ++ cpu = <&cpu_port0>; + }; + +- port@6 { ++ cpu_port1: port@5 { ++ reg = <5>; ++ label = "cpu"; ++ ethernet = <&gmac1>; ++ phy-mode = "rgmii"; ++ ++ fixed-link { ++ speed = <1000>; ++ full-duplex; ++ }; ++ }; ++ ++ cpu_port0: port@6 { + reg = <6>; + label = "cpu"; + ethernet = <&gmac0>; +@@ -168,8 +208,6 @@ + }; + }; + }; +- }; +-}; + + &i2c0 { + pinctrl-names = "default"; +Index: linux-4.14.18/arch/arm/boot/dts/Makefile +=================================================================== +--- linux-4.14.18.orig/arch/arm/boot/dts/Makefile ++++ linux-4.14.18/arch/arm/boot/dts/Makefile +@@ -1061,6 +1061,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \ + mt6580-evbp1.dtb \ + mt6589-aquaris5.dtb \ + mt6592-evb.dtb \ ++ mt7623a-rfb-emmc.dtb \ + mt7623n-rfb-nand.dtb \ + mt7623n-bananapi-bpi-r2.dtb \ + mt8127-moose.dtb \ +Index: linux-4.14.18/arch/arm/boot/dts/mt7623a-rfb-emmc.dts +=================================================================== +--- /dev/null ++++ linux-4.14.18/arch/arm/boot/dts/mt7623a-rfb-emmc.dts +@@ -0,0 +1,449 @@ ++/* ++ * Copyright 2017 Sean Wang ++ * ++ * SPDX-License-Identifier: (GPL-2.0+ OR MIT) ++ */ ++ ++/dts-v1/; ++#include ++#include "mt7623.dtsi" ++#include "mt6323.dtsi" ++ ++/ { ++ model = "MediaTek MT7623N NAND reference board"; ++ compatible = "mediatek,mt7623a-rfb-emmc", "mediatek,mt7623"; ++ ++ aliases { ++ serial2 = &uart2; ++ }; ++ ++ chosen { ++ bootargs = "earlyprintk block2mtd.block2mtd=/dev/mmcblk0,65536,eMMC,5 mtdparts=eMMC:256k(mbr)ro,512k(uboot)ro,256k(config)ro,256k(factory)ro,32M(kernel),32M(recovery),1024M(rootfs),2048M(usrdata),-(bmtpool) rootfstype=squashfs,jffs2"; ++ ++ stdout-path = "serial2:115200n8"; ++ }; ++ ++ memory { ++ reg = <0 0x80000000 0 0x20000000>; ++ }; ++ ++ cpus { ++ cpu@0 { ++ proc-supply = <&mt6323_vproc_reg>; ++ }; ++ ++ cpu@1 { ++ proc-supply = <&mt6323_vproc_reg>; ++ }; ++ ++ cpu@2 { ++ proc-supply = <&mt6323_vproc_reg>; ++ }; ++ ++ cpu@3 { ++ proc-supply = <&mt6323_vproc_reg>; ++ }; ++ }; ++ ++ memory@80000000 { ++ reg = <0 0x80000000 0 0x40000000>; ++ }; ++ ++ mt7530: switch@0 { ++ compatible = "mediatek,mt7530"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ }; ++}; ++ ++&crypto { ++ status = "okay"; ++}; ++ ++ð { ++ status = "okay"; ++ ++ gmac0: mac@0 { ++ compatible = "mediatek,eth-mac"; ++ reg = <0>; ++ phy-mode = "trgmii"; ++ ++ fixed-link { ++ speed = <1000>; ++ full-duplex; ++ pause; ++ }; ++ }; ++ ++ gmac1: mac@1 { ++ compatible = "mediatek,eth-mac"; ++ reg = <1>; ++ phy-mode = "rgmiii-rxid"; ++ phy-handle = <&phy5>; ++ }; ++ ++ mdio: mdio-bus { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ phy5: ethernet-phy@5 { ++ reg = <5>; ++ phy-mode = "rgmii-rxid"; ++ }; ++ }; ++}; ++ ++&mt7530 { ++ compatible = "mediatek,mt7530"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0>; ++ pinctrl-names = "default"; ++ mediatek,mcm; ++ resets = <ðsys 2>; ++ reset-names = "mcm"; ++ core-supply = <&mt6323_vpa_reg>; ++ io-supply = <&mt6323_vemc3v3_reg>; ++ ++ dsa,mii-bus = <&mdio>; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0>; ++ ++ port@0 { ++ reg = <0>; ++ label = "lan0"; ++ cpu = <&cpu_port0>; ++ }; ++ ++ port@1 { ++ reg = <1>; ++ label = "lan1"; ++ cpu = <&cpu_port0>; ++ }; ++ ++ port@2 { ++ reg = <2>; ++ label = "lan2"; ++ cpu = <&cpu_port0>; ++ }; ++ ++ port@3 { ++ reg = <3>; ++ label = "lan3"; ++ cpu = <&cpu_port0>; ++ }; ++ ++ cpu_port0: port@6 { ++ reg = <6>; ++ label = "cpu"; ++ ethernet = <&gmac0>; ++ phy-mode = "trgmii"; ++ ++ fixed-link { ++ speed = <1000>; ++ full-duplex; ++ }; ++ }; ++ }; ++}; ++ ++&i2c0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c0_pins_a>; ++ status = "okay"; ++}; ++ ++&i2c1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c1_pins_a>; ++ status = "okay"; ++}; ++ ++&mmc0 { ++ pinctrl-names = "default", "state_uhs"; ++ pinctrl-0 = <&mmc0_pins_default>; ++ pinctrl-1 = <&mmc0_pins_uhs>; ++ status = "okay"; ++ bus-width = <8>; ++ max-frequency = <50000000>; ++ cap-mmc-highspeed; ++ vmmc-supply = <&mt6323_vemc3v3_reg>; ++ vqmmc-supply = <&mt6323_vio18_reg>; ++ non-removable; ++}; ++ ++&mmc1 { ++ pinctrl-names = "default", "state_uhs"; ++ pinctrl-0 = <&mmc1_pins_default>; ++ pinctrl-1 = <&mmc1_pins_uhs>; ++ status = "okay"; ++ bus-width = <4>; ++ max-frequency = <50000000>; ++ cap-sd-highspeed; ++ cd-gpios = <&pio 261 0>; ++ vmmc-supply = <&mt6323_vmch_reg>; ++ vqmmc-supply = <&mt6323_vio18_reg>; ++}; ++ ++&pio { ++ cir_pins_a:cir@0 { ++ pins_cir { ++ pinmux = ; ++ bias-disable; ++ }; ++ }; ++ ++ i2c0_pins_a: i2c@0 { ++ pins_i2c0 { ++ pinmux = , ++ ; ++ bias-disable; ++ }; ++ }; ++ ++ i2c1_pins_a: i2c@1 { ++ pin_i2c1 { ++ pinmux = , ++ ; ++ bias-disable; ++ }; ++ }; ++ ++ i2s0_pins_a: i2s@0 { ++ pin_i2s0 { ++ pinmux = , ++ , ++ , ++ , ++ ; ++ drive-strength = ; ++ bias-pull-down; ++ }; ++ }; ++ ++ i2s1_pins_a: i2s@1 { ++ pin_i2s1 { ++ pinmux = , ++ , ++ , ++ , ++ ; ++ drive-strength = ; ++ bias-pull-down; ++ }; ++ }; ++ ++ mmc0_pins_default: mmc0default { ++ pins_cmd_dat { ++ pinmux = , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ ; ++ input-enable; ++ bias-pull-up; ++ }; ++ ++ pins_clk { ++ pinmux = ; ++ bias-pull-down; ++ }; ++ ++ pins_rst { ++ pinmux = ; ++ bias-pull-up; ++ }; ++ }; ++ ++ mmc0_pins_uhs: mmc0 { ++ pins_cmd_dat { ++ pinmux = , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ ; ++ input-enable; ++ drive-strength = ; ++ bias-pull-up = ; ++ }; ++ ++ pins_clk { ++ pinmux = ; ++ drive-strength = ; ++ bias-pull-down = ; ++ }; ++ ++ pins_rst { ++ pinmux = ; ++ bias-pull-up; ++ }; ++ }; ++ ++ mmc1_pins_default: mmc1default { ++ pins_cmd_dat { ++ pinmux = , ++ , ++ , ++ , ++ ; ++ input-enable; ++ drive-strength = ; ++ bias-pull-up = ; ++ }; ++ ++ pins_clk { ++ pinmux = ; ++ bias-pull-down; ++ drive-strength = ; ++ }; ++ ++ pins_wp { ++ pinmux = ; ++ input-enable; ++ bias-pull-up; ++ }; ++ ++ pins_insert { ++ pinmux = ; ++ bias-pull-up; ++ }; ++ }; ++ ++ mmc1_pins_uhs: mmc1 { ++ pins_cmd_dat { ++ pinmux = , ++ , ++ , ++ , ++ ; ++ input-enable; ++ drive-strength = ; ++ bias-pull-up = ; ++ }; ++ ++ pins_clk { ++ pinmux = ; ++ drive-strength = ; ++ bias-pull-down = ; ++ }; ++ }; ++ ++ pwm_pins_a: pwm@0 { ++ pins_pwm { ++ pinmux = , ++ , ++ , ++ , ++ ; ++ }; ++ }; ++ ++ spi0_pins_a: spi@0 { ++ pins_spi { ++ pinmux = , ++ , ++ , ++ ; ++ bias-disable; ++ }; ++ }; ++ ++ uart0_pins_a: uart@0 { ++ pins_dat { ++ pinmux = , ++ ; ++ }; ++ }; ++ ++ uart1_pins_a: uart@1 { ++ pins_dat { ++ pinmux = , ++ ; ++ }; ++ }; ++}; ++ ++&pwm { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pwm_pins_a>; ++ status = "okay"; ++}; ++ ++&pwrap { ++ mt6323 { ++ mt6323led: led { ++ compatible = "mediatek,mt6323-led"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ led@0 { ++ reg = <0>; ++ label = "bpi-r2:isink:green"; ++ default-state = "off"; ++ }; ++ ++ led@1 { ++ reg = <1>; ++ label = "bpi-r2:isink:red"; ++ default-state = "off"; ++ }; ++ ++ led@2 { ++ reg = <2>; ++ label = "bpi-r2:isink:blue"; ++ default-state = "off"; ++ }; ++ }; ++ }; ++}; ++ ++&spi0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi0_pins_a>; ++ status = "okay"; ++}; ++ ++&uart0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart0_pins_a>; ++ status = "disabled"; ++}; ++ ++&uart1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart1_pins_a>; ++ status = "disabled"; ++}; ++ ++&uart2 { ++ status = "okay"; ++}; ++ ++&usb1 { ++ vusb33-supply = <&mt6323_vusb_reg>; ++ status = "okay"; ++}; ++ ++&usb2 { ++ vusb33-supply = <&mt6323_vusb_reg>; ++ status = "okay"; ++}; ++ ++&u3phy1 { ++ status = "okay"; ++}; ++ ++&u3phy2 { ++ status = "okay"; ++}; ++ +Index: linux-4.14.18/arch/arm/boot/dts/mt7623.dtsi +=================================================================== +--- linux-4.14.18.orig/arch/arm/boot/dts/mt7623.dtsi ++++ linux-4.14.18/arch/arm/boot/dts/mt7623.dtsi +@@ -753,6 +753,7 @@ + "syscon"; + reg = <0 0x1b000000 0 0x1000>; + #clock-cells = <1>; ++ #reset-cells = <1>; + }; + + eth: ethernet@1b100000 { -- cgit v1.2.3