From 3a14580411adfb75f9a44eded9f41245b9e44606 Mon Sep 17 00:00:00 2001 From: Daniel Golle Date: Mon, 21 Mar 2022 01:16:48 +0000 Subject: kernel: delete Linux 5.4 config and patches As the upcoming release will be based on Linux 5.10 only, remove all kernel configuration as well as patches for Linux 5.4. There were no targets still actively using Linux 5.4. Signed-off-by: Daniel Golle --- ...s104x-use-a-pseudo-bus-to-constrain-usb-d.patch | 193 --------------------- 1 file changed, 193 deletions(-) delete mode 100644 target/linux/layerscape/patches-5.4/302-dts-0018-arm64-dts-ls104x-use-a-pseudo-bus-to-constrain-usb-d.patch (limited to 'target/linux/layerscape/patches-5.4/302-dts-0018-arm64-dts-ls104x-use-a-pseudo-bus-to-constrain-usb-d.patch') diff --git a/target/linux/layerscape/patches-5.4/302-dts-0018-arm64-dts-ls104x-use-a-pseudo-bus-to-constrain-usb-d.patch b/target/linux/layerscape/patches-5.4/302-dts-0018-arm64-dts-ls104x-use-a-pseudo-bus-to-constrain-usb-d.patch deleted file mode 100644 index 81faace4c2..0000000000 --- a/target/linux/layerscape/patches-5.4/302-dts-0018-arm64-dts-ls104x-use-a-pseudo-bus-to-constrain-usb-d.patch +++ /dev/null @@ -1,193 +0,0 @@ -From a6a86473350c7dcbae61afa1e926941d76ca17ed Mon Sep 17 00:00:00 2001 -From: Laurentiu Tudor -Date: Thu, 20 Sep 2018 13:46:54 +0300 -Subject: [PATCH] arm64: dts: ls104x: use a pseudo-bus to constrain usb dma - size - -Wrap the usb controllers in an intermediate simple-bus and use it to -constrain the dma address size of these usb controllers to the 40 bits -that they generate toward the interconnect. -This is required because the SoC uses 48 bits address sizes and this -mismatch would lead to smmu context faults because the usb generates -40-bit addresses while the smmu page tables are populated with 48-bit -wide addresses. - -Suggested-by: Robin Murphy -Signed-off-by: Laurentiu Tudor ---- - arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 82 ++++++++++++++------------ - arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 76 +++++++++++++----------- - 2 files changed, 87 insertions(+), 71 deletions(-) - ---- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi -+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi -@@ -727,43 +727,51 @@ - <&clockgen 4 0>; - }; - -- usb0: usb3@2f00000 { -- compatible = "snps,dwc3"; -- reg = <0x0 0x2f00000 0x0 0x10000>; -- interrupts = <0 60 0x4>; -- dr_mode = "host"; -- snps,quirk-frame-length-adjustment = <0x20>; -- snps,dis_rxdet_inp3_quirk; -- usb3-lpm-capable; -- snps,dis-u1u2-when-u3-quirk; -- snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; -- configure-gfladj; -- }; -+ usb_aux_bus: usb_aux_bus { -+ #address-cells = <2>; -+ #size-cells = <2>; -+ compatible = "simple-bus"; -+ ranges; -+ dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x00000000>; - -- usb1: usb3@3000000 { -- compatible = "snps,dwc3"; -- reg = <0x0 0x3000000 0x0 0x10000>; -- interrupts = <0 61 0x4>; -- dr_mode = "host"; -- snps,quirk-frame-length-adjustment = <0x20>; -- snps,dis_rxdet_inp3_quirk; -- usb3-lpm-capable; -- snps,dis-u1u2-when-u3-quirk; -- snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; -- configure-gfladj; -- }; -+ usb0: usb3@2f00000 { -+ compatible = "snps,dwc3"; -+ reg = <0x0 0x2f00000 0x0 0x10000>; -+ interrupts = <0 60 0x4>; -+ dr_mode = "host"; -+ snps,quirk-frame-length-adjustment = <0x20>; -+ snps,dis_rxdet_inp3_quirk; -+ usb3-lpm-capable; -+ snps,dis-u1u2-when-u3-quirk; -+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; -+ configure-gfladj; -+ }; -+ -+ usb1: usb3@3000000 { -+ compatible = "snps,dwc3"; -+ reg = <0x0 0x3000000 0x0 0x10000>; -+ interrupts = <0 61 0x4>; -+ dr_mode = "host"; -+ snps,quirk-frame-length-adjustment = <0x20>; -+ snps,dis_rxdet_inp3_quirk; -+ usb3-lpm-capable; -+ snps,dis-u1u2-when-u3-quirk; -+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; -+ configure-gfladj; -+ }; - -- usb2: usb3@3100000 { -- compatible = "snps,dwc3"; -- reg = <0x0 0x3100000 0x0 0x10000>; -- interrupts = <0 63 0x4>; -- dr_mode = "host"; -- snps,quirk-frame-length-adjustment = <0x20>; -- snps,dis_rxdet_inp3_quirk; -- usb3-lpm-capable; -- snps,dis-u1u2-when-u3-quirk; -- snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; -- configure-gfladj; -+ usb2: usb3@3100000 { -+ compatible = "snps,dwc3"; -+ reg = <0x0 0x3100000 0x0 0x10000>; -+ interrupts = <0 63 0x4>; -+ dr_mode = "host"; -+ snps,quirk-frame-length-adjustment = <0x20>; -+ snps,dis_rxdet_inp3_quirk; -+ usb3-lpm-capable; -+ snps,dis-u1u2-when-u3-quirk; -+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; -+ configure-gfladj; -+ }; - }; - - sata: sata@3200000 { ---- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi -+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi -@@ -625,40 +625,48 @@ - <&clockgen 4 1>; - }; - -- usb0: usb@2f00000 { -- compatible = "snps,dwc3"; -- reg = <0x0 0x2f00000 0x0 0x10000>; -- interrupts = ; -- dr_mode = "host"; -- snps,quirk-frame-length-adjustment = <0x20>; -- snps,dis_rxdet_inp3_quirk; -- snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; -- usb3-lpm-capable; -- snps,dis-u1u2-when-u3-quirk; -- }; -+ usb_aux_bus: usb_aux_bus { -+ #address-cells = <2>; -+ #size-cells = <2>; -+ compatible = "simple-bus"; -+ ranges; -+ dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x00000000>; - -- usb1: usb@3000000 { -- compatible = "snps,dwc3"; -- reg = <0x0 0x3000000 0x0 0x10000>; -- interrupts = ; -- dr_mode = "host"; -- snps,quirk-frame-length-adjustment = <0x20>; -- snps,dis_rxdet_inp3_quirk; -- snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; -- usb3-lpm-capable; -- snps,dis-u1u2-when-u3-quirk; -- }; -+ usb0: usb@2f00000 { -+ compatible = "snps,dwc3"; -+ reg = <0x0 0x2f00000 0x0 0x10000>; -+ interrupts = ; -+ dr_mode = "host"; -+ snps,quirk-frame-length-adjustment = <0x20>; -+ snps,dis_rxdet_inp3_quirk; -+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; -+ usb3-lpm-capable; -+ snps,dis-u1u2-when-u3-quirk; -+ }; -+ -+ usb1: usb@3000000 { -+ compatible = "snps,dwc3"; -+ reg = <0x0 0x3000000 0x0 0x10000>; -+ interrupts = ; -+ dr_mode = "host"; -+ snps,quirk-frame-length-adjustment = <0x20>; -+ snps,dis_rxdet_inp3_quirk; -+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; -+ usb3-lpm-capable; -+ snps,dis-u1u2-when-u3-quirk; -+ }; - -- usb2: usb@3100000 { -- compatible = "snps,dwc3"; -- reg = <0x0 0x3100000 0x0 0x10000>; -- interrupts = ; -- dr_mode = "host"; -- snps,quirk-frame-length-adjustment = <0x20>; -- snps,dis_rxdet_inp3_quirk; -- snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; -- usb3-lpm-capable; -- snps,dis-u1u2-when-u3-quirk; -+ usb2: usb@3100000 { -+ compatible = "snps,dwc3"; -+ reg = <0x0 0x3100000 0x0 0x10000>; -+ interrupts = ; -+ dr_mode = "host"; -+ snps,quirk-frame-length-adjustment = <0x20>; -+ snps,dis_rxdet_inp3_quirk; -+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; -+ usb3-lpm-capable; -+ snps,dis-u1u2-when-u3-quirk; -+ }; - }; - - sata: sata@3200000 { -- cgit v1.2.3