From c6c731fe311f7da42777ffd31804a4f6aa3f8e19 Mon Sep 17 00:00:00 2001 From: Yutang Jiang Date: Sat, 29 Oct 2016 00:14:32 +0800 Subject: layerscape: add 64b/32b target for ls1043ardb device Add support for NXP layerscape ls1043ardb 64b/32b Dev board. LS1043a is an SoC with 4x64-bit up to 1.6 GHz ARMv8 A53 cores. ls1043ardb support features as: 2GB DDR4, 128MB NOR/512MB NAND, USB3.0, eSDHC, I2C, GPIO, PCIe/Mini-PCIe, 6x1G/1x10G network port, etc. 64b/32b ls1043ardb target is using 4.4 kernel, and rcw/u-boot/fman images from NXP QorIQ SDK release. All of 4.4 kernel patches porting from SDK release or upstream. QorIQ SDK ISOs can be downloaded from this location: http://www.nxp.com/products/software-and-tools/run-time-software/linux-sdk/linux-sdk-for-qoriq-processors:SDKLINUX Signed-off-by: Yutang Jiang --- ...repair-issue-introduced-with-2.5G-support.patch | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) create mode 100644 target/linux/layerscape/patches-4.4/7064-dpaa_eth-repair-issue-introduced-with-2.5G-support.patch (limited to 'target/linux/layerscape/patches-4.4/7064-dpaa_eth-repair-issue-introduced-with-2.5G-support.patch') diff --git a/target/linux/layerscape/patches-4.4/7064-dpaa_eth-repair-issue-introduced-with-2.5G-support.patch b/target/linux/layerscape/patches-4.4/7064-dpaa_eth-repair-issue-introduced-with-2.5G-support.patch new file mode 100644 index 0000000000..929e2103b3 --- /dev/null +++ b/target/linux/layerscape/patches-4.4/7064-dpaa_eth-repair-issue-introduced-with-2.5G-support.patch @@ -0,0 +1,22 @@ +From e555d24e5df9b2d5b8a613ff46af68fc3ff3a360 Mon Sep 17 00:00:00 2001 +From: Madalin Bucur +Date: Wed, 30 Mar 2016 16:12:33 +0300 +Subject: [PATCH 64/70] dpaa_eth: repair issue introduced with 2.5G support + +Signed-off-by: Madalin Bucur +--- + drivers/net/ethernet/freescale/sdk_dpaa/mac.c | 3 ++- + 1 file changed, 2 insertions(+), 1 deletion(-) + +--- a/drivers/net/ethernet/freescale/sdk_dpaa/mac.c ++++ b/drivers/net/ethernet/freescale/sdk_dpaa/mac.c +@@ -346,7 +346,8 @@ static int __cold mac_probe(struct platf + SUPPORTED_100baseT_Half); + + /* Gigabit support (no half-duplex) */ +- if (mac_dev->max_speed == 1000) ++ if (mac_dev->max_speed == SPEED_1000 || ++ mac_dev->max_speed == SPEED_2500) + mac_dev->if_support |= SUPPORTED_1000baseT_Full; + + /* The 10G interface only supports one mode */ -- cgit v1.2.3