From 0a827ebd2fa3c7dc210aff0a30d0dc1d536ed89c Mon Sep 17 00:00:00 2001 From: Biwen Li Date: Fri, 2 Nov 2018 11:21:57 +0800 Subject: layerscape: upgrade kernel to 4.14 This patch is to upgrade kernel to 4.14 for layerscape. patches-4.14 for layerscape included two categories. - NXP Layerscape SDK kernel-4.14 patches All patches on tag LSDK-18.09-V4.14 were ported to OpenWrt kernel. Since there were hundreds patches, we had to make an all-in-one patch for each IP/feature. See below links for LSDK kernel. https://lsdk.github.io/components.html https://source.codeaurora.org/external/qoriq/qoriq-components/linux - Non-LSDK kernel patches Other patches which were not in LSDK were just put in patches-4.14. Kept below patches from patches-4.9. 303-dts-layerscape-add-traverse-ls1043.patch 821-add-esdhc-vsel-to-ls1043.patch 822-rgmii-fixed-link.patch Renamed and rebase them as below in patches-4.14, 303-add-DTS-for-Traverse-LS1043-Boards.patch 712-sdk-dpaa-rgmii-fixed-link.patch 824-mmc-sdhci-of-esdhc-add-voltage-switch-support-for-ls.patch Signed-off-by: Yangbo Lu Signed-off-by: Biwen Li --- .../patches-4.14/823-pm-support-layerscape.patch | 718 +++++++++++++++++++++ 1 file changed, 718 insertions(+) create mode 100644 target/linux/layerscape/patches-4.14/823-pm-support-layerscape.patch (limited to 'target/linux/layerscape/patches-4.14/823-pm-support-layerscape.patch') diff --git a/target/linux/layerscape/patches-4.14/823-pm-support-layerscape.patch b/target/linux/layerscape/patches-4.14/823-pm-support-layerscape.patch new file mode 100644 index 0000000000..e5c3b7db08 --- /dev/null +++ b/target/linux/layerscape/patches-4.14/823-pm-support-layerscape.patch @@ -0,0 +1,718 @@ +From aded309f403c4202b9c6f61ea6a635e0c736eb77 Mon Sep 17 00:00:00 2001 +From: Biwen Li +Date: Tue, 30 Oct 2018 18:27:07 +0800 +Subject: [PATCH 40/40] pm: support layerscape +This is an integrated patch of pm for layerscape + +Signed-off-by: Chenhui Zhao +Signed-off-by: Hongbo Zhang +Signed-off-by: Li Yang +Signed-off-by: Ran Wang +Signed-off-by: Tang Yuantian +Signed-off-by: Zhao Chenhui +Signed-off-by: Biwen Li +--- + .../devicetree/bindings/powerpc/fsl/pmc.txt | 59 ++-- + drivers/firmware/psci.c | 16 +- + drivers/soc/fsl/rcpm.c | 158 ++++++++++ + drivers/soc/fsl/sleep_fsm.c | 279 ++++++++++++++++++ + drivers/soc/fsl/sleep_fsm.h | 130 ++++++++ + 5 files changed, 615 insertions(+), 27 deletions(-) + create mode 100644 drivers/soc/fsl/rcpm.c + create mode 100644 drivers/soc/fsl/sleep_fsm.c + create mode 100644 drivers/soc/fsl/sleep_fsm.h + +--- a/Documentation/devicetree/bindings/powerpc/fsl/pmc.txt ++++ b/Documentation/devicetree/bindings/powerpc/fsl/pmc.txt +@@ -9,15 +9,20 @@ Properties: + + "fsl,mpc8548-pmc" should be listed for any chip whose PMC is + compatible. "fsl,mpc8536-pmc" should also be listed for any chip +- whose PMC is compatible, and implies deep-sleep capability. ++ whose PMC is compatible, and implies deep-sleep capability and ++ wake on user defined packet(wakeup on ARP). ++ ++ "fsl,p1022-pmc" should be listed for any chip whose PMC is ++ compatible, and implies lossless Ethernet capability during sleep. + + "fsl,mpc8641d-pmc" should be listed for any chip whose PMC is + compatible; all statements below that apply to "fsl,mpc8548-pmc" also + apply to "fsl,mpc8641d-pmc". + + Compatibility does not include bit assignments in SCCR/PMCDR/DEVDISR; these +- bit assignments are indicated via the sleep specifier in each device's +- sleep property. ++ bit assignments are indicated via the clock nodes. Device which has a ++ controllable clock source should have a "fsl,pmc-handle" property pointing ++ to the clock node. + + - reg: For devices compatible with "fsl,mpc8349-pmc", the first resource + is the PMC block, and the second resource is the Clock Configuration +@@ -33,31 +38,35 @@ Properties: + this is a phandle to an "fsl,gtm" node on which timer 4 can be used as + a wakeup source from deep sleep. + +-Sleep specifiers: +- +- fsl,mpc8349-pmc: Sleep specifiers consist of one cell. For each bit +- that is set in the cell, the corresponding bit in SCCR will be saved +- and cleared on suspend, and restored on resume. This sleep controller +- supports disabling and resuming devices at any time. +- +- fsl,mpc8536-pmc: Sleep specifiers consist of three cells, the third of +- which will be ORed into PMCDR upon suspend, and cleared from PMCDR +- upon resume. The first two cells are as described for fsl,mpc8578-pmc. +- This sleep controller only supports disabling devices during system +- sleep, or permanently. +- +- fsl,mpc8548-pmc: Sleep specifiers consist of one or two cells, the +- first of which will be ORed into DEVDISR (and the second into +- DEVDISR2, if present -- this cell should be zero or absent if the +- hardware does not have DEVDISR2) upon a request for permanent device +- disabling. This sleep controller does not support configuring devices +- to disable during system sleep (unless supported by another compatible +- match), or dynamically. ++Clock nodes: ++The clock nodes are to describe the masks in PM controller registers for each ++soc clock. ++- fsl,pmcdr-mask: For "fsl,mpc8548-pmc"-compatible devices, the mask will be ++ ORed into PMCDR before suspend if the device using this clock is the wake-up ++ source and need to be running during low power mode; clear the mask if ++ otherwise. ++ ++- fsl,sccr-mask: For "fsl,mpc8349-pmc"-compatible devices, the corresponding ++ bit specified by the mask in SCCR will be saved and cleared on suspend, and ++ restored on resume. ++ ++- fsl,devdisr-mask: Contain one or two cells, depending on the availability of ++ DEVDISR2 register. For compatible devices, the mask will be ORed into DEVDISR ++ or DEVDISR2 when the clock should be permenently disabled. + + Example: + +- power@b00 { +- compatible = "fsl,mpc8313-pmc", "fsl,mpc8349-pmc"; +- reg = <0xb00 0x100 0xa00 0x100>; +- interrupts = <80 8>; ++ power@e0070 { ++ compatible = "fsl,mpc8536-pmc", "fsl,mpc8548-pmc"; ++ reg = <0xe0070 0x20>; ++ ++ etsec1_clk: soc-clk@24 { ++ fsl,pmcdr-mask = <0x00000080>; ++ }; ++ etsec2_clk: soc-clk@25 { ++ fsl,pmcdr-mask = <0x00000040>; ++ }; ++ etsec3_clk: soc-clk@26 { ++ fsl,pmcdr-mask = <0x00000020>; ++ }; + }; +--- a/drivers/firmware/psci.c ++++ b/drivers/firmware/psci.c +@@ -437,8 +437,18 @@ CPUIDLE_METHOD_OF_DECLARE(psci, "psci", + + static int psci_system_suspend(unsigned long unused) + { +- return invoke_psci_fn(PSCI_FN_NATIVE(1_0, SYSTEM_SUSPEND), +- __pa_symbol(cpu_resume), 0, 0); ++ u32 state; ++ u32 ver = psci_get_version(); ++ ++ if (PSCI_VERSION_MAJOR(ver) >= 1) { ++ return invoke_psci_fn(PSCI_FN_NATIVE(1_0, SYSTEM_SUSPEND), ++ virt_to_phys(cpu_resume), 0, 0); ++ } else { ++ state = ( 2 << PSCI_0_2_POWER_STATE_AFFL_SHIFT) | ++ (1 << PSCI_0_2_POWER_STATE_TYPE_SHIFT); ++ ++ return psci_cpu_suspend(state, virt_to_phys(cpu_resume)); ++ } + } + + static int psci_system_suspend_enter(suspend_state_t state) +@@ -562,6 +572,8 @@ static void __init psci_0_2_set_function + arm_pm_restart = psci_sys_reset; + + pm_power_off = psci_sys_poweroff; ++ ++ suspend_set_ops(&psci_suspend_ops); + } + + /* +--- /dev/null ++++ b/drivers/soc/fsl/rcpm.c +@@ -0,0 +1,158 @@ ++/* ++ * Run Control and Power Management (RCPM) driver ++ * ++ * Copyright 2016 NXP ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ */ ++#define pr_fmt(fmt) "RCPM: %s: " fmt, __func__ ++ ++#include ++#include ++#include ++#include ++#include ++ ++/* RCPM register offset */ ++#define RCPM_IPPDEXPCR0 0x140 ++ ++#define RCPM_WAKEUP_CELL_SIZE 2 ++ ++struct rcpm_config { ++ int ipp_num; ++ int ippdexpcr_offset; ++ u32 ippdexpcr[2]; ++ void *rcpm_reg_base; ++}; ++ ++static struct rcpm_config *rcpm; ++ ++static inline void rcpm_reg_write(u32 offset, u32 value) ++{ ++ iowrite32be(value, rcpm->rcpm_reg_base + offset); ++} ++ ++static inline u32 rcpm_reg_read(u32 offset) ++{ ++ return ioread32be(rcpm->rcpm_reg_base + offset); ++} ++ ++static void rcpm_wakeup_fixup(struct device *dev, void *data) ++{ ++ struct device_node *node = dev ? dev->of_node : NULL; ++ u32 value[RCPM_WAKEUP_CELL_SIZE]; ++ int ret, i; ++ ++ if (!dev || !node || !device_may_wakeup(dev)) ++ return; ++ ++ /* ++ * Get the values in the "rcpm-wakeup" property. ++ * Three values are: ++ * The first is a pointer to the RCPM node. ++ * The second is the value of the ippdexpcr0 register. ++ * The third is the value of the ippdexpcr1 register. ++ */ ++ ret = of_property_read_u32_array(node, "fsl,rcpm-wakeup", ++ value, RCPM_WAKEUP_CELL_SIZE); ++ if (ret) ++ return; ++ ++ pr_debug("wakeup source: the device %s\n", node->full_name); ++ ++ for (i = 0; i < rcpm->ipp_num; i++) ++ rcpm->ippdexpcr[i] |= value[i + 1]; ++} ++ ++static int rcpm_suspend_prepare(void) ++{ ++ int i; ++ u32 val; ++ ++ BUG_ON(!rcpm); ++ ++ for (i = 0; i < rcpm->ipp_num; i++) ++ rcpm->ippdexpcr[i] = 0; ++ ++ dpm_for_each_dev(NULL, rcpm_wakeup_fixup); ++ ++ for (i = 0; i < rcpm->ipp_num; i++) { ++ if (rcpm->ippdexpcr[i]) { ++ val = rcpm_reg_read(rcpm->ippdexpcr_offset + 4 * i); ++ rcpm_reg_write(rcpm->ippdexpcr_offset + 4 * i, ++ val | rcpm->ippdexpcr[i]); ++ pr_debug("ippdexpcr%d = 0x%x\n", i, rcpm->ippdexpcr[i]); ++ } ++ } ++ ++ return 0; ++} ++ ++static int rcpm_suspend_notifier_call(struct notifier_block *bl, ++ unsigned long state, ++ void *unused) ++{ ++ switch (state) { ++ case PM_SUSPEND_PREPARE: ++ rcpm_suspend_prepare(); ++ break; ++ } ++ ++ return NOTIFY_DONE; ++} ++ ++static struct rcpm_config rcpm_default_config = { ++ .ipp_num = 1, ++ .ippdexpcr_offset = RCPM_IPPDEXPCR0, ++}; ++ ++static const struct of_device_id rcpm_matches[] = { ++ { ++ .compatible = "fsl,qoriq-rcpm-2.1", ++ .data = &rcpm_default_config, ++ }, ++ {} ++}; ++ ++static struct notifier_block rcpm_suspend_notifier = { ++ .notifier_call = rcpm_suspend_notifier_call, ++}; ++ ++static int __init layerscape_rcpm_init(void) ++{ ++ const struct of_device_id *match; ++ struct device_node *np; ++ ++ np = of_find_matching_node_and_match(NULL, rcpm_matches, &match); ++ if (!np) { ++ pr_err("Can't find the RCPM node.\n"); ++ return -EINVAL; ++ } ++ ++ if (match->data) ++ rcpm = (struct rcpm_config *)match->data; ++ else ++ return -EINVAL; ++ ++ rcpm->rcpm_reg_base = of_iomap(np, 0); ++ of_node_put(np); ++ if (!rcpm->rcpm_reg_base) ++ return -ENOMEM; ++ ++ register_pm_notifier(&rcpm_suspend_notifier); ++ ++ pr_info("The RCPM driver initialized.\n"); ++ ++ return 0; ++} ++ ++subsys_initcall(layerscape_rcpm_init); +--- /dev/null ++++ b/drivers/soc/fsl/sleep_fsm.c +@@ -0,0 +1,279 @@ ++/* ++ * deep sleep FSM (finite-state machine) configuration ++ * ++ * Copyright 2018 NXP ++ * ++ * Author: Hongbo Zhang ++ * Chenhui Zhao ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions are met: ++ * * Redistributions of source code must retain the above copyright ++ * notice, this list of conditions and the following disclaimer. ++ * * Redistributions in binary form must reproduce the above copyright ++ * notice, this list of conditions and the following disclaimer in the ++ * documentation and/or other materials provided with the distribution. ++ * * Neither the name of the above-listed copyright holders nor the ++ * names of any contributors may be used to endorse or promote products ++ * derived from this software without specific prior written permission. ++ * ++ * ALTERNATIVELY, this software may be distributed under the terms of the ++ * GNU General Public License ("GPL") as published by the Free Software ++ * Foundation, either version 2 of that License or (at your option) any ++ * later version. ++ * ++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE ++ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR ++ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF ++ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS ++ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN ++ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ++ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE ++ * POSSIBILITY OF SUCH DAMAGE. ++ */ ++ ++#include ++#include ++#include ++ ++#include "sleep_fsm.h" ++/* ++ * These values are from chip's reference manual. For example, ++ * the values for T1040 can be found in "8.4.3.8 Programming ++ * supporting deep sleep mode" of Chapter 8 "Run Control and ++ * Power Management (RCPM)". ++ * The default value can be applied to T104x, LS1021. ++ */ ++struct fsm_reg_vals epu_default_val[] = { ++ /* EPGCR (Event Processor Global Control Register) */ ++ {EPGCR, 0}, ++ /* EPECR (Event Processor Event Control Registers) */ ++ {EPECR0 + EPECR_STRIDE * 0, 0}, ++ {EPECR0 + EPECR_STRIDE * 1, 0}, ++ {EPECR0 + EPECR_STRIDE * 2, 0xF0004004}, ++ {EPECR0 + EPECR_STRIDE * 3, 0x80000084}, ++ {EPECR0 + EPECR_STRIDE * 4, 0x20000084}, ++ {EPECR0 + EPECR_STRIDE * 5, 0x08000004}, ++ {EPECR0 + EPECR_STRIDE * 6, 0x80000084}, ++ {EPECR0 + EPECR_STRIDE * 7, 0x80000084}, ++ {EPECR0 + EPECR_STRIDE * 8, 0x60000084}, ++ {EPECR0 + EPECR_STRIDE * 9, 0x08000084}, ++ {EPECR0 + EPECR_STRIDE * 10, 0x42000084}, ++ {EPECR0 + EPECR_STRIDE * 11, 0x90000084}, ++ {EPECR0 + EPECR_STRIDE * 12, 0x80000084}, ++ {EPECR0 + EPECR_STRIDE * 13, 0x08000084}, ++ {EPECR0 + EPECR_STRIDE * 14, 0x02000084}, ++ {EPECR0 + EPECR_STRIDE * 15, 0x00000004}, ++ /* ++ * EPEVTCR (Event Processor EVT Pin Control Registers) ++ * SCU8 triger EVT2, and SCU11 triger EVT9 ++ */ ++ {EPEVTCR0 + EPEVTCR_STRIDE * 0, 0}, ++ {EPEVTCR0 + EPEVTCR_STRIDE * 1, 0}, ++ {EPEVTCR0 + EPEVTCR_STRIDE * 2, 0x80000001}, ++ {EPEVTCR0 + EPEVTCR_STRIDE * 3, 0}, ++ {EPEVTCR0 + EPEVTCR_STRIDE * 4, 0}, ++ {EPEVTCR0 + EPEVTCR_STRIDE * 5, 0}, ++ {EPEVTCR0 + EPEVTCR_STRIDE * 6, 0}, ++ {EPEVTCR0 + EPEVTCR_STRIDE * 7, 0}, ++ {EPEVTCR0 + EPEVTCR_STRIDE * 8, 0}, ++ {EPEVTCR0 + EPEVTCR_STRIDE * 9, 0xB0000001}, ++ /* EPCMPR (Event Processor Counter Compare Registers) */ ++ {EPCMPR0 + EPCMPR_STRIDE * 0, 0}, ++ {EPCMPR0 + EPCMPR_STRIDE * 1, 0}, ++ {EPCMPR0 + EPCMPR_STRIDE * 2, 0x000000FF}, ++ {EPCMPR0 + EPCMPR_STRIDE * 3, 0}, ++ {EPCMPR0 + EPCMPR_STRIDE * 4, 0x000000FF}, ++ {EPCMPR0 + EPCMPR_STRIDE * 5, 0x00000020}, ++ {EPCMPR0 + EPCMPR_STRIDE * 6, 0}, ++ {EPCMPR0 + EPCMPR_STRIDE * 7, 0}, ++ {EPCMPR0 + EPCMPR_STRIDE * 8, 0x000000FF}, ++ {EPCMPR0 + EPCMPR_STRIDE * 9, 0x000000FF}, ++ {EPCMPR0 + EPCMPR_STRIDE * 10, 0x000000FF}, ++ {EPCMPR0 + EPCMPR_STRIDE * 11, 0x000000FF}, ++ {EPCMPR0 + EPCMPR_STRIDE * 12, 0x000000FF}, ++ {EPCMPR0 + EPCMPR_STRIDE * 13, 0}, ++ {EPCMPR0 + EPCMPR_STRIDE * 14, 0x000000FF}, ++ {EPCMPR0 + EPCMPR_STRIDE * 15, 0x000000FF}, ++ /* EPCCR (Event Processor Counter Control Registers) */ ++ {EPCCR0 + EPCCR_STRIDE * 0, 0}, ++ {EPCCR0 + EPCCR_STRIDE * 1, 0}, ++ {EPCCR0 + EPCCR_STRIDE * 2, 0x92840000}, ++ {EPCCR0 + EPCCR_STRIDE * 3, 0}, ++ {EPCCR0 + EPCCR_STRIDE * 4, 0x92840000}, ++ {EPCCR0 + EPCCR_STRIDE * 5, 0x92840000}, ++ {EPCCR0 + EPCCR_STRIDE * 6, 0}, ++ {EPCCR0 + EPCCR_STRIDE * 7, 0}, ++ {EPCCR0 + EPCCR_STRIDE * 8, 0x92840000}, ++ {EPCCR0 + EPCCR_STRIDE * 9, 0x92840000}, ++ {EPCCR0 + EPCCR_STRIDE * 10, 0x92840000}, ++ {EPCCR0 + EPCCR_STRIDE * 11, 0x92840000}, ++ {EPCCR0 + EPCCR_STRIDE * 12, 0x92840000}, ++ {EPCCR0 + EPCCR_STRIDE * 13, 0}, ++ {EPCCR0 + EPCCR_STRIDE * 14, 0x92840000}, ++ {EPCCR0 + EPCCR_STRIDE * 15, 0x92840000}, ++ /* EPSMCR (Event Processor SCU Mux Control Registers) */ ++ {EPSMCR0 + EPSMCR_STRIDE * 0, 0}, ++ {EPSMCR0 + EPSMCR_STRIDE * 1, 0}, ++ {EPSMCR0 + EPSMCR_STRIDE * 2, 0x6C700000}, ++ {EPSMCR0 + EPSMCR_STRIDE * 3, 0x2F000000}, ++ {EPSMCR0 + EPSMCR_STRIDE * 4, 0x002F0000}, ++ {EPSMCR0 + EPSMCR_STRIDE * 5, 0x00002E00}, ++ {EPSMCR0 + EPSMCR_STRIDE * 6, 0x7C000000}, ++ {EPSMCR0 + EPSMCR_STRIDE * 7, 0x30000000}, ++ {EPSMCR0 + EPSMCR_STRIDE * 8, 0x64300000}, ++ {EPSMCR0 + EPSMCR_STRIDE * 9, 0x00003000}, ++ {EPSMCR0 + EPSMCR_STRIDE * 10, 0x65000030}, ++ {EPSMCR0 + EPSMCR_STRIDE * 11, 0x31740000}, ++ {EPSMCR0 + EPSMCR_STRIDE * 12, 0x7F000000}, ++ {EPSMCR0 + EPSMCR_STRIDE * 13, 0x00003100}, ++ {EPSMCR0 + EPSMCR_STRIDE * 14, 0x00000031}, ++ {EPSMCR0 + EPSMCR_STRIDE * 15, 0x76000000}, ++ /* EPACR (Event Processor Action Control Registers) */ ++ {EPACR0 + EPACR_STRIDE * 0, 0}, ++ {EPACR0 + EPACR_STRIDE * 1, 0}, ++ {EPACR0 + EPACR_STRIDE * 2, 0}, ++ {EPACR0 + EPACR_STRIDE * 3, 0x00000080}, ++ {EPACR0 + EPACR_STRIDE * 4, 0}, ++ {EPACR0 + EPACR_STRIDE * 5, 0x00000040}, ++ {EPACR0 + EPACR_STRIDE * 6, 0}, ++ {EPACR0 + EPACR_STRIDE * 7, 0}, ++ {EPACR0 + EPACR_STRIDE * 8, 0}, ++ {EPACR0 + EPACR_STRIDE * 9, 0x0000001C}, ++ {EPACR0 + EPACR_STRIDE * 10, 0x00000020}, ++ {EPACR0 + EPACR_STRIDE * 11, 0}, ++ {EPACR0 + EPACR_STRIDE * 12, 0x00000003}, ++ {EPACR0 + EPACR_STRIDE * 13, 0x06000000}, ++ {EPACR0 + EPACR_STRIDE * 14, 0x04000000}, ++ {EPACR0 + EPACR_STRIDE * 15, 0x02000000}, ++ /* EPIMCR (Event Processor Input Mux Control Registers) */ ++ {EPIMCR0 + EPIMCR_STRIDE * 0, 0}, ++ {EPIMCR0 + EPIMCR_STRIDE * 1, 0}, ++ {EPIMCR0 + EPIMCR_STRIDE * 2, 0}, ++ {EPIMCR0 + EPIMCR_STRIDE * 3, 0}, ++ {EPIMCR0 + EPIMCR_STRIDE * 4, 0x44000000}, ++ {EPIMCR0 + EPIMCR_STRIDE * 5, 0x40000000}, ++ {EPIMCR0 + EPIMCR_STRIDE * 6, 0}, ++ {EPIMCR0 + EPIMCR_STRIDE * 7, 0}, ++ {EPIMCR0 + EPIMCR_STRIDE * 8, 0}, ++ {EPIMCR0 + EPIMCR_STRIDE * 9, 0}, ++ {EPIMCR0 + EPIMCR_STRIDE * 10, 0}, ++ {EPIMCR0 + EPIMCR_STRIDE * 11, 0}, ++ {EPIMCR0 + EPIMCR_STRIDE * 12, 0x44000000}, ++ {EPIMCR0 + EPIMCR_STRIDE * 13, 0}, ++ {EPIMCR0 + EPIMCR_STRIDE * 14, 0}, ++ {EPIMCR0 + EPIMCR_STRIDE * 15, 0}, ++ {EPIMCR0 + EPIMCR_STRIDE * 16, 0x6A000000}, ++ {EPIMCR0 + EPIMCR_STRIDE * 17, 0}, ++ {EPIMCR0 + EPIMCR_STRIDE * 18, 0}, ++ {EPIMCR0 + EPIMCR_STRIDE * 19, 0}, ++ {EPIMCR0 + EPIMCR_STRIDE * 20, 0x48000000}, ++ {EPIMCR0 + EPIMCR_STRIDE * 21, 0}, ++ {EPIMCR0 + EPIMCR_STRIDE * 22, 0x6C000000}, ++ {EPIMCR0 + EPIMCR_STRIDE * 23, 0}, ++ {EPIMCR0 + EPIMCR_STRIDE * 24, 0}, ++ {EPIMCR0 + EPIMCR_STRIDE * 25, 0}, ++ {EPIMCR0 + EPIMCR_STRIDE * 26, 0}, ++ {EPIMCR0 + EPIMCR_STRIDE * 27, 0}, ++ {EPIMCR0 + EPIMCR_STRIDE * 28, 0x76000000}, ++ {EPIMCR0 + EPIMCR_STRIDE * 29, 0}, ++ {EPIMCR0 + EPIMCR_STRIDE * 30, 0}, ++ {EPIMCR0 + EPIMCR_STRIDE * 31, 0x76000000}, ++ /* EPXTRIGCR (Event Processor Crosstrigger Control Register) */ ++ {EPXTRIGCR, 0x0000FFDF}, ++ /* end */ ++ {FSM_END_FLAG, 0}, ++}; ++ ++struct fsm_reg_vals npc_default_val[] = { ++ /* NPC triggered Memory-Mapped Access Registers */ ++ {NCR, 0x80000000}, ++ {MCCR1, 0}, ++ {MCSR1, 0}, ++ {MMAR1LO, 0}, ++ {MMAR1HI, 0}, ++ {MMDR1, 0}, ++ {MCSR2, 0}, ++ {MMAR2LO, 0}, ++ {MMAR2HI, 0}, ++ {MMDR2, 0}, ++ {MCSR3, 0x80000000}, ++ {MMAR3LO, 0x000E2130}, ++ {MMAR3HI, 0x00030000}, ++ {MMDR3, 0x00020000}, ++ /* end */ ++ {FSM_END_FLAG, 0}, ++}; ++ ++/** ++ * fsl_fsm_setup - Configure EPU's FSM registers ++ * @base: the base address of registers ++ * @val: Pointer to address-value pairs for FSM registers ++ */ ++void fsl_fsm_setup(void __iomem *base, struct fsm_reg_vals *val) ++{ ++ struct fsm_reg_vals *data = val; ++ ++ WARN_ON(!base || !data); ++ while (data->offset != FSM_END_FLAG) { ++ iowrite32be(data->value, base + data->offset); ++ data++; ++ } ++} ++ ++void fsl_epu_setup_default(void __iomem *epu_base) ++{ ++ fsl_fsm_setup(epu_base, epu_default_val); ++} ++ ++void fsl_npc_setup_default(void __iomem *npc_base) ++{ ++ fsl_fsm_setup(npc_base, npc_default_val); ++} ++ ++void fsl_epu_clean_default(void __iomem *epu_base) ++{ ++ u32 offset; ++ ++ /* follow the exact sequence to clear the registers */ ++ /* Clear EPACRn */ ++ for (offset = EPACR0; offset <= EPACR15; offset += EPACR_STRIDE) ++ iowrite32be(0, epu_base + offset); ++ ++ /* Clear EPEVTCRn */ ++ for (offset = EPEVTCR0; offset <= EPEVTCR9; offset += EPEVTCR_STRIDE) ++ iowrite32be(0, epu_base + offset); ++ ++ /* Clear EPGCR */ ++ iowrite32be(0, epu_base + EPGCR); ++ ++ /* Clear EPSMCRn */ ++ for (offset = EPSMCR0; offset <= EPSMCR15; offset += EPSMCR_STRIDE) ++ iowrite32be(0, epu_base + offset); ++ ++ /* Clear EPCCRn */ ++ for (offset = EPCCR0; offset <= EPCCR31; offset += EPCCR_STRIDE) ++ iowrite32be(0, epu_base + offset); ++ ++ /* Clear EPCMPRn */ ++ for (offset = EPCMPR0; offset <= EPCMPR31; offset += EPCMPR_STRIDE) ++ iowrite32be(0, epu_base + offset); ++ ++ /* Clear EPCTRn */ ++ for (offset = EPCTR0; offset <= EPCTR31; offset += EPCTR_STRIDE) ++ iowrite32be(0, epu_base + offset); ++ ++ /* Clear EPIMCRn */ ++ for (offset = EPIMCR0; offset <= EPIMCR31; offset += EPIMCR_STRIDE) ++ iowrite32be(0, epu_base + offset); ++ ++ /* Clear EPXTRIGCRn */ ++ iowrite32be(0, epu_base + EPXTRIGCR); ++ ++ /* Clear EPECRn */ ++ for (offset = EPECR0; offset <= EPECR15; offset += EPECR_STRIDE) ++ iowrite32be(0, epu_base + offset); ++} +--- /dev/null ++++ b/drivers/soc/fsl/sleep_fsm.h +@@ -0,0 +1,130 @@ ++/* ++ * deep sleep FSM (finite-state machine) configuration ++ * ++ * Copyright 2018 NXP ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions are met: ++ * * Redistributions of source code must retain the above copyright ++ * notice, this list of conditions and the following disclaimer. ++ * * Redistributions in binary form must reproduce the above copyright ++ * notice, this list of conditions and the following disclaimer in the ++ * documentation and/or other materials provided with the distribution. ++ * * Neither the name of the above-listed copyright holders nor the ++ * names of any contributors may be used to endorse or promote products ++ * derived from this software without specific prior written permission. ++ * ++ * ++ * ALTERNATIVELY, this software may be distributed under the terms of the ++ * GNU General Public License ("GPL") as published by the Free Software ++ * Foundation, either version 2 of that License or (at your option) any ++ * later version. ++ * ++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE ++ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR ++ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF ++ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS ++ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN ++ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ++ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE ++ * POSSIBILITY OF SUCH DAMAGE. ++ */ ++ ++#ifndef _FSL_SLEEP_FSM_H ++#define _FSL_SLEEP_FSM_H ++ ++#define FSL_STRIDE_4B 4 ++#define FSL_STRIDE_8B 8 ++ ++/* End flag */ ++#define FSM_END_FLAG 0xFFFFFFFFUL ++ ++/* Block offsets */ ++#define RCPM_BLOCK_OFFSET 0x00022000 ++#define EPU_BLOCK_OFFSET 0x00000000 ++#define NPC_BLOCK_OFFSET 0x00001000 ++ ++/* EPGCR (Event Processor Global Control Register) */ ++#define EPGCR 0x000 ++ ++/* EPEVTCR0-9 (Event Processor EVT Pin Control Registers) */ ++#define EPEVTCR0 0x050 ++#define EPEVTCR9 0x074 ++#define EPEVTCR_STRIDE FSL_STRIDE_4B ++ ++/* EPXTRIGCR (Event Processor Crosstrigger Control Register) */ ++#define EPXTRIGCR 0x090 ++ ++/* EPIMCR0-31 (Event Processor Input Mux Control Registers) */ ++#define EPIMCR0 0x100 ++#define EPIMCR31 0x17C ++#define EPIMCR_STRIDE FSL_STRIDE_4B ++ ++/* EPSMCR0-15 (Event Processor SCU Mux Control Registers) */ ++#define EPSMCR0 0x200 ++#define EPSMCR15 0x278 ++#define EPSMCR_STRIDE FSL_STRIDE_8B ++ ++/* EPECR0-15 (Event Processor Event Control Registers) */ ++#define EPECR0 0x300 ++#define EPECR15 0x33C ++#define EPECR_STRIDE FSL_STRIDE_4B ++ ++/* EPACR0-15 (Event Processor Action Control Registers) */ ++#define EPACR0 0x400 ++#define EPACR15 0x43C ++#define EPACR_STRIDE FSL_STRIDE_4B ++ ++/* EPCCRi0-15 (Event Processor Counter Control Registers) */ ++#define EPCCR0 0x800 ++#define EPCCR15 0x83C ++#define EPCCR31 0x87C ++#define EPCCR_STRIDE FSL_STRIDE_4B ++ ++/* EPCMPR0-15 (Event Processor Counter Compare Registers) */ ++#define EPCMPR0 0x900 ++#define EPCMPR15 0x93C ++#define EPCMPR31 0x97C ++#define EPCMPR_STRIDE FSL_STRIDE_4B ++ ++/* EPCTR0-31 (Event Processor Counter Register) */ ++#define EPCTR0 0xA00 ++#define EPCTR31 0xA7C ++#define EPCTR_STRIDE FSL_STRIDE_4B ++ ++/* NPC triggered Memory-Mapped Access Registers */ ++#define NCR 0x000 ++#define MCCR1 0x0CC ++#define MCSR1 0x0D0 ++#define MMAR1LO 0x0D4 ++#define MMAR1HI 0x0D8 ++#define MMDR1 0x0DC ++#define MCSR2 0x0E0 ++#define MMAR2LO 0x0E4 ++#define MMAR2HI 0x0E8 ++#define MMDR2 0x0EC ++#define MCSR3 0x0F0 ++#define MMAR3LO 0x0F4 ++#define MMAR3HI 0x0F8 ++#define MMDR3 0x0FC ++ ++/* RCPM Core State Action Control Register 0 */ ++#define CSTTACR0 0xB00 ++ ++/* RCPM Core Group 1 Configuration Register 0 */ ++#define CG1CR0 0x31C ++ ++struct fsm_reg_vals { ++ u32 offset; ++ u32 value; ++}; ++ ++void fsl_fsm_setup(void __iomem *base, struct fsm_reg_vals *val); ++void fsl_epu_setup_default(void __iomem *epu_base); ++void fsl_npc_setup_default(void __iomem *npc_base); ++void fsl_epu_clean_default(void __iomem *epu_base); ++ ++#endif /* _FSL_SLEEP_FSM_H */ -- cgit v1.2.3