From ba07cc0cbb3d486366e4ae3b79e69f972d8c2c5d Mon Sep 17 00:00:00 2001 From: Mathias Kresin Date: Wed, 17 Feb 2021 23:37:54 +0100 Subject: lantiq: fritz7320: enable USB power supply The USB ports if a FRIZZ!Box 7320 do not supply power to connected devices. Add the GPIOs enabling USB power as regulator, to enable USB power supply as soon as the USB driver is loaded. Fixes FS#3624 Signed-off-by: Mathias Kresin --- .../mips/boot/dts/lantiq/ar9_avm_fritz7320.dts | 46 ++++++++++++++++++++++ 1 file changed, 46 insertions(+) (limited to 'target/linux/lantiq/files/arch/mips/boot/dts') diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/ar9_avm_fritz7320.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/ar9_avm_fritz7320.dts index 9fbac6fa12..5f38936577 100644 --- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/ar9_avm_fritz7320.dts +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/ar9_avm_fritz7320.dts @@ -69,6 +69,30 @@ gpios = <&gpio 45 GPIO_ACTIVE_LOW>; }; }; + + usb0_vbus: regulator-usb0-vbus { + compatible = "regulator-fixed"; + + regulator-name = "USB0_VBUS"; + + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&gpio 50 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + usb1_vbus: regulator-usb1-vbus { + compatible = "regulator-fixed"; + + regulator-name = "USB1_VBUS"; + + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&gpio 51 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; }; &gsw { @@ -77,6 +101,26 @@ mtd-mac-address-increment = <(-2)>; }; +&gpio { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + usb0_vbus { + lantiq,pins = "io50"; + lantiq,pull = <0>; + lantiq,open-drain = <0>; + lantiq,output = <1>; + }; + usb1_vbus { + lantiq,pins = "io51"; + lantiq,pull = <0>; + lantiq,open-drain = <0>; + lantiq,output = <1>; + }; + }; +}; + &localbus { flash@0 { compatible = "lantiq,nor"; @@ -142,8 +186,10 @@ &usb0 { status = "okay"; + vbus-supply = <&usb0_vbus>; }; &usb1 { status = "okay"; + vbus-supply = <&usb1_vbus>; }; -- cgit v1.2.3