From b7fc892eb56b52d25bc00578af9d1ee058dcf6b3 Mon Sep 17 00:00:00 2001
From: blogic <blogic@3c298f89-4303-0410-b956-a3cf2f4a3e73>
Date: Mon, 2 May 2016 18:50:18 +0000
Subject: lantiq: move partitions into partion table node

Starting with kernel 4.4, the use of partitions as direct subnodes of the
mtd device is discouraged and only supported for backward compatiblity
reasons.

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 49280
---
 target/linux/lantiq/dts/TDW89X0.dtsi | 42 ++++++++++++++++++++----------------
 1 file changed, 24 insertions(+), 18 deletions(-)

(limited to 'target/linux/lantiq/dts/TDW89X0.dtsi')

diff --git a/target/linux/lantiq/dts/TDW89X0.dtsi b/target/linux/lantiq/dts/TDW89X0.dtsi
index 312a2d6f63..634b29679a 100644
--- a/target/linux/lantiq/dts/TDW89X0.dtsi
+++ b/target/linux/lantiq/dts/TDW89X0.dtsi
@@ -158,27 +158,33 @@
 		spi-max-frequency = <33250000>;
 		m25p,fast-read;
 
-		partition@0 {
-			reg = <0x0 0x20000>;
-			label = "u-boot";
-			read-only;
-		};
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				reg = <0x0 0x20000>;
+				label = "u-boot";
+				read-only;
+			};
 
-		partition@20000 {
-			reg = <0x20000 0x7a0000>;
-			label = "firmware";
-		};
+			partition@20000 {
+				reg = <0x20000 0x7a0000>;
+				label = "firmware";
+			};
 
-		partition@7c0000 {
-			reg = <0x7c0000 0x10000>;
-			label = "config";
-			read-only;
-		};
+			partition@7c0000 {
+				reg = <0x7c0000 0x10000>;
+				label = "config";
+				read-only;
+			};
 
-		ath9k_cal: partition@7d0000 {
-			reg = <0x7d0000 0x30000>;
-			label = "boardconfig";
-			read-only;
+			ath9k_cal: partition@7d0000 {
+				reg = <0x7d0000 0x30000>;
+				label = "boardconfig";
+				read-only;
+			};
 		};
 	};
 };
-- 
cgit v1.2.3