From a20616863d32d91163043b6657a63c836bd9c5ba Mon Sep 17 00:00:00 2001 From: Martin Blumenstingl Date: Sat, 26 Nov 2016 01:01:15 +0100 Subject: lantiq: use ath9k device tree bindings binding/owl-loader This moves the extraction of the eeprom/calibration data to a hotplug firmware script. Additionally it modifies all .dts to configure ath9k directly from within the .dts. The owl-loader approach enables support on devices with exotic eeprom data locations (such as unaligned positions on the flash or data inside an UBI volume). Signed-off-by: Martin Blumenstingl [add ath9k caldata mac address patcher] [fixes DGN3500 wifi mac] [fixes BTHOMEHUBV3A wifi mac] [set invalid mac for BTHOMEHUB2B, FRITZ3370, FRITZ7320 & FRITZ7360SL to restore previous random mac behavior] Signed-off-by: Mathias Kresin --- target/linux/lantiq/dts/FRITZ7320.dts | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) (limited to 'target/linux/lantiq/dts/FRITZ7320.dts') diff --git a/target/linux/lantiq/dts/FRITZ7320.dts b/target/linux/lantiq/dts/FRITZ7320.dts index 4cc4915312..4eb5fc4fe3 100644 --- a/target/linux/lantiq/dts/FRITZ7320.dts +++ b/target/linux/lantiq/dts/FRITZ7320.dts @@ -65,14 +65,6 @@ }; }; - ath9k_eep { - compatible = "ath9k,eeprom"; - ath,eep-flash = <&ath9k_cal 0x985>; - ath,device-id = /bits/ 16 <0xff1d 0x2d>; - ath,eep-endian; - ath,eep-swap; - }; - gpio: pinmux@E100B10 { pinctrl-names = "default"; pinctrl-0 = <&state_default>; @@ -103,12 +95,6 @@ ifxhcd@E101000 { status = "okay"; }; - - pci@E105400 { - status = "okay"; - req-mask = <0xf>; - gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; - }; }; gpio-keys-polled { @@ -158,3 +144,15 @@ }; }; }; + +&pci0 { + status = "okay"; + req-mask = <0xf>; + gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; + + wifi@0,0 { + compatible = "pci0,0"; + reg = <0x7000 0 0 0 0>; + qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */ + }; +}; -- cgit v1.2.3