From d88043aa65dea525223f4543bfe6278f28574705 Mon Sep 17 00:00:00 2001 From: John Crispin Date: Thu, 25 Apr 2013 19:03:32 +0000 Subject: lantiq: move dts files to thir own folder Signed-off-by: John Crispin git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36443 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- target/linux/lantiq/dts/FRITZ3370.dts | 278 ++++++++++++++++++++++++++++++++++ 1 file changed, 278 insertions(+) create mode 100644 target/linux/lantiq/dts/FRITZ3370.dts (limited to 'target/linux/lantiq/dts/FRITZ3370.dts') diff --git a/target/linux/lantiq/dts/FRITZ3370.dts b/target/linux/lantiq/dts/FRITZ3370.dts new file mode 100644 index 0000000000..df3089286d --- /dev/null +++ b/target/linux/lantiq/dts/FRITZ3370.dts @@ -0,0 +1,278 @@ +/dts-v1/; + +/include/ "vr9.dtsi" + +/ { + model = "FRITZ3370 - Fritz!Box WLAN 3370"; + + chosen { + bootargs = "console=ttyLTQ0,115200 init=/etc/preinit rootfstype=jffs2"; + }; + + memory@0 { + reg = <0x0 0x8000000>; + }; + + fpi@10000000 { + localbus@0 { + nand-parts@0 { + compatible = "gen_nand", "lantiq,nand-xway"; + bank-width = <2>; + reg = <1 0x0 0x2000000>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "kernel"; + reg = <0x00000 0x400000>; + }; + + partition@400000 { + label = "rootfs"; + reg = <0x400000 0x3000000>; + }; + + partition@3400000 { + label = "vr9_firmware"; + reg = <0x3400000 0x400000>; + }; + partition@3800000 { + label = "reserved"; + reg = <0x3800000 0x3000000>; + }; + partition@6800000 { + label = "config"; + reg = <0x6800000 0x200000>; + }; + partition@6a00000 { + label = "nand-filesystem"; + reg = <0x6a00000 0x1600000>; + }; + }; + }; + + spi@E100800 { + compatible = "lantiq,spi-xway-broken"; + reg = <0xE100800 0x100>; + interrupt-parent = <&icu0>; + interrupts = <22 23 24>; + #address-cells = <1>; + #size-cells = <1>; + + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "s25fl129p0"; + reg = <0 0>; + linux,modalias = "m25p80", "mx25l3205d"; + spi-max-frequency = <1000000>; + + partition@0 { + reg = <0x0 0x20000>; + label = "SPI (RO) U-Boot Image"; + read-only; + }; + + partition@20000 { + reg = <0x20000 0x10000>; + label = "ENV_MAC"; + read-only; + }; + + partition@30000 { + reg = <0x30000 0x10000>; + label = "DPF"; + read-only; + }; + + partition@40000 { + reg = <0x40000 0x10000>; + label = "NVRAM"; + read-only; + }; + + partition@500000 { + reg = <0x50000 0x003a0000>; + label = "kernel"; + }; + }; + }; + + gpio: pinmux@E100B10 { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + spi { + lantiq,groups = "spi", "spi_cs4"; + lantiq,function = "spi"; + }; + nand_out { + lantiq,groups = "nand cle", "nand ale", "nand rd", "ebu a23", "ebu a24"; + lantiq,function = "ebu"; + lantiq,direction = <1>; + lantiq,pull = <0>; + }; + nand_in { + lantiq,groups = "nand rdy"; + lantiq,function = "ebu"; + lantiq,direction = <0>; + lantiq,open-drain = <1>; + lantiq,pull = <2>; + }; + mdio { + lantiq,groups = "mdio"; + lantiq,function = "mdio"; + }; + phy-rst { + lantiq,pins = "io37", "io44"; + lantiq,pull = <0>; + lantiq,open-drain = <0>; + lantiq,output = <1>; + }; + pcie-rst { + lantiq,pins = "io38"; + lantiq,pull = <0>; + lantiq,output = <1>; + }; + }; + }; + + eth@E108000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "lantiq,xrx200-net"; + reg = < 0xE108000 0x3000 /* switch */ + 0xE10B100 0x70 /* mdio */ + 0xE10B1D8 0x30 /* mii */ + 0xE10B308 0x30 /* pmac */ + >; + interrupt-parent = <&icu0>; + interrupts = <73 72>; + + lan: interface@0 { + compatible = "lantiq,xrx200-pdi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + mac-address = [ 00 11 22 33 44 55 ]; + + ethernet@0 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <0>; + phy-mode = "rgmii"; + phy-handle = <&phy0>; + gpios = <&gpio 37 0>; + }; + ethernet@1 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <1>; + phy-mode = "rgmii"; + phy-handle = <&phy1>; + gpios = <&gpio 44 0>; + }; + ethernet@2 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <2>; + phy-mode = "gmii"; + phy-handle = <&phy11>; + }; + ethernet@3 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <4>; + phy-mode = "gmii"; + phy-handle = <&phy13>; + }; + }; + + mdio@0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "lantiq,xrx200-mdio"; + phy0: ethernet-phy@0 { + reg = <0x0>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + lantiq,c45-reg-init = <1 0 0 0>; + }; + phy1: ethernet-phy@1 { + reg = <0x1>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + lantiq,c45-reg-init = <1 0 0 0>; + }; + phy11: ethernet-phy@11 { + reg = <0x11>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + lantiq,c45-reg-init = <1 0 0 0>; + }; + phy13: ethernet-phy@13 { + reg = <0x13>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + lantiq,c45-reg-init = <1 0 0 0>; + }; + }; + }; + + ifxhcd@E101000 { + status = "okay"; + gpios = <&gpio 5 0 + &gpio 14 0>; + lantiq,portmask = <0x3>; + }; + }; + + gphy-xrx200 { + compatible = "lantiq,phy-xrx200"; + firmware = "lantiq/vr9_phy11g_a1x.bin"; + phys = [ 00 01 ]; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + power { + label = "power"; + gpios = <&gpio 1 0>; + linux,code = <0x100>; + }; +/* wifi { + label = "wifi"; + gpios = <&gpio 29 0>; + linux,code = <0x101>; + };*/ + }; + + gpio-leds { + compatible = "gpio-leds"; + + power { + label = "power"; + gpios = <&gpio 32 1>; + }; + power2 { + label = "power2"; + gpios = <&gpio 33 1>; + }; + info_red { + label = "info_red"; + gpios = <&gpio 34 1>; + }; + wifi { + label = "wifi"; + gpios = <&gpio 35 1>; + }; + dsl { + label = "dsl"; + gpios = <&gpio 36 1>; + }; + lan { + label = "lan"; + gpios = <&gpio 38 1>; + }; + info_green { + label = "info_green"; + gpios = <&gpio 47 1>; + }; + }; +}; -- cgit v1.2.3