From 99fc9728a61d763ba619490158b0f60d0e6d70cb Mon Sep 17 00:00:00 2001
From: Luka Perkov <luka@openwrt.org>
Date: Fri, 8 Aug 2014 13:55:30 +0000
Subject: kirkwood: drop 3.10 support

Signed-off-by: Luka Perkov <luka@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42077 3c298f89-4303-0410-b956-a3cf2f4a3e73
---
 .../kirkwood/patches-3.10/120-pogoplug_e02.patch   | 130 ---------------------
 1 file changed, 130 deletions(-)
 delete mode 100644 target/linux/kirkwood/patches-3.10/120-pogoplug_e02.patch

(limited to 'target/linux/kirkwood/patches-3.10/120-pogoplug_e02.patch')

diff --git a/target/linux/kirkwood/patches-3.10/120-pogoplug_e02.patch b/target/linux/kirkwood/patches-3.10/120-pogoplug_e02.patch
deleted file mode 100644
index 5cff4a3247..0000000000
--- a/target/linux/kirkwood/patches-3.10/120-pogoplug_e02.patch
+++ /dev/null
@@ -1,130 +0,0 @@
---- /dev/null
-+++ b/arch/arm/boot/dts/kirkwood-pogo_e02.dts
-@@ -0,0 +1,117 @@
-+/dts-v1/;
-+
-+/include/ "kirkwood.dtsi"
-+/include/ "kirkwood-6281.dtsi"
-+
-+/ {
-+	model = "Cloud Engines Pogoplug E02";
-+	compatible = "cloudengines,pogoe02", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-+
-+	memory {
-+		device_type = "memory";
-+		reg = <0x00000000 0x10000000>;
-+	};
-+
-+	chosen {
-+		bootargs = "console=ttyS0,115200n8 earlyprintk";
-+	};
-+
-+	ocp@f1000000 {
-+		pinctrl: pinctrl@10000 {
-+
-+			pinctrl-0 = < &pmx_usb_power_enable &pmx_led_orange
-+				      &pmx_led_green >;
-+			pinctrl-names = "default";
-+
-+			pmx_usb_power_enable: pmx-usb-power-enable {
-+				marvell,pins = "mpp29";
-+				marvell,function = "gpio";
-+			};
-+			pmx_led_green: pmx-led_green {
-+				marvell,pins = "mpp48";
-+				marvell,function = "gpio";
-+			};
-+			pmx_led_orange: pmx-led_orange {
-+				marvell,pins = "mpp49";
-+				marvell,function = "gpio";
-+			};
-+		};
-+
-+		serial@12000 {
-+			status = "okay";
-+		};
-+
-+		nand@3000000 {
-+			status = "okay";
-+
-+			partition@0 {
-+				label = "u-boot";
-+				reg = <0x0000000 0x100000>;
-+			};
-+
-+			partition@100000 {
-+				label = "uImage";
-+				reg = <0x0100000 0x400000>;
-+			};
-+
-+			partition@500000 {
-+				label = "rootfs";
-+				reg = <0x0500000 0x2000000>;
-+			};
-+
-+			partition@2500000 {
-+				label = "data";
-+				reg = <0x2500000 0x5b00000>;
-+			};
-+		};
-+	};
-+
-+	gpio-leds {
-+		compatible = "gpio-leds";
-+
-+		health {
-+			label = "status:green:health";
-+			gpios = <&gpio1 16 1>;
-+			linux,default-trigger = "default-on";
-+		};
-+		fault {
-+			label = "status:orange:fault";
-+			gpios = <&gpio1 17 1>;
-+		};
-+	};
-+
-+	regulators {
-+		compatible = "simple-bus";
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+
-+		usb_power: regulator@1 {
-+			compatible = "regulator-fixed";
-+			reg = <1>;
-+			regulator-name = "USB Power";
-+			regulator-min-microvolt = <5000000>;
-+			regulator-max-microvolt = <5000000>;
-+			enable-active-high;
-+			regulator-always-on;
-+			regulator-boot-on;
-+			gpio = <&gpio0 29 0>;
-+		};
-+	};
-+};
-+
-+&mdio {
-+	status = "okay";
-+
-+	ethphy0: ethernet-phy@0 {
-+		device_type = "ethernet-phy";
-+		reg = <0>;
-+	};
-+};
-+
-+&eth0 {
-+	status = "okay";
-+
-+	ethernet0-port@0 {
-+		phy-handle = <&ethphy0>;
-+	};
-+};
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -86,6 +86,7 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-
- 	kirkwood-ns2max.dtb \
- 	kirkwood-ns2mini.dtb \
- 	kirkwood-nsa310.dtb \
-+	kirkwood-pogo_e02.dtb \
- 	kirkwood-topkick.dtb \
- 	kirkwood-ts219-6281.dtb \
- 	kirkwood-ts219-6282.dtb \
-- 
cgit v1.2.3