From 7a3a99c8a6efe8a473103e22d0bb60037ded1321 Mon Sep 17 00:00:00 2001 From: Pawel Dembicki Date: Mon, 2 Mar 2020 21:24:03 +0100 Subject: kirkwood: copy files and config from 4.19 to 5.4 This commit is simple copy config, files and patches from 4.19 to 5.4 kernel. No changes was done. Signed-off-by: Pawel Dembicki --- .../arch/arm/boot/dts/kirkwood-goflexhome.dts | 135 +++++++++++++++++++++ 1 file changed, 135 insertions(+) create mode 100644 target/linux/kirkwood/files-5.4/arch/arm/boot/dts/kirkwood-goflexhome.dts (limited to 'target/linux/kirkwood/files-5.4/arch/arm/boot/dts/kirkwood-goflexhome.dts') diff --git a/target/linux/kirkwood/files-5.4/arch/arm/boot/dts/kirkwood-goflexhome.dts b/target/linux/kirkwood/files-5.4/arch/arm/boot/dts/kirkwood-goflexhome.dts new file mode 100644 index 0000000000..b0b69b46cd --- /dev/null +++ b/target/linux/kirkwood/files-5.4/arch/arm/boot/dts/kirkwood-goflexhome.dts @@ -0,0 +1,135 @@ +/dts-v1/; + +#include "kirkwood.dtsi" +#include "kirkwood-6281.dtsi" + +/ { + model = "Seagate GoFlex Home"; + compatible = "seagate,goflexhome", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + aliases { + led-boot = &led_health; + led-failsafe = &led_fault; + led-running = &led_health; + led-upgrade = &led_fault; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x8000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10"; + stdout-path = &uart0; + }; + + ocp@f1000000 { + pinctrl: pin-controller@10000 { + pmx_usb_power_enable: pmx-usb-power-enable { + marvell,pins = "mpp29"; + marvell,function = "gpio"; + }; + + pmx_led_white: pmx-led-white { + marvell,pins = "mpp40"; + marvell,function = "gpio"; + }; + + pmx_led_green: pmx-led_green { + marvell,pins = "mpp46"; + marvell,function = "gpio"; + }; + + pmx_led_orange: pmx-led-orange { + marvell,pins = "mpp47"; + marvell,function = "gpio"; + }; + }; + + serial@12000 { + status = "okay"; + }; + + sata@80000 { + status = "okay"; + nr-ports = <2>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + led_health: health { + label = "status:green:health"; + gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + + led_fault: fault { + label = "status:orange:fault"; + gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + }; + + misc { + label = "status:white:misc"; + gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; + linux,default-trigger = "disk-activity"; + }; + }; + + regulators { + compatible = "simple-bus"; + + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-0 = <&pmx_usb_power_enable>; + pinctrl-names = "default"; + + usb_power: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "USB Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&nand { + status = "okay"; + + chip-delay = <40>; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x0100000>; + read-only; + }; + + partition@100000 { + label = "ubi"; + reg = <0x0100000 0xff00000>; + }; +}; + +&mdio { + status = "okay"; + + ethphy0: ethernet-phy@0 { + reg = <0>; + }; +}; + +ð0 { + status = "okay"; + + ethernet0-port@0 { + phy-handle = <ðphy0>; + }; +}; -- cgit v1.2.3