From 65305cb44869774a7db10c517b871dce5ab46ccb Mon Sep 17 00:00:00 2001
From: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Date: Sat, 13 Jun 2020 00:36:01 +0200
Subject: kirkwood: use real model names for Linksys devices

This replaces the internal device names "Audi" and "Viper" with the
real model names, which a user would look for. This makes the
Linksys devices on this target consistent with the names recently
changed for mvebu based on the same idea.

As a consequence, the "viper" device definition is split into two
separate definitions with the correct names for both real models.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
---
 target/linux/kirkwood/base-files/etc/board.d/01_leds           | 5 +++--
 target/linux/kirkwood/base-files/etc/board.d/02_network        | 5 +++--
 target/linux/kirkwood/base-files/etc/board.d/05_compat-version | 5 +++--
 target/linux/kirkwood/base-files/etc/init.d/bootcount          | 5 +++--
 target/linux/kirkwood/base-files/lib/upgrade/platform.sh       | 5 +++--
 5 files changed, 15 insertions(+), 10 deletions(-)

(limited to 'target/linux/kirkwood/base-files')

diff --git a/target/linux/kirkwood/base-files/etc/board.d/01_leds b/target/linux/kirkwood/base-files/etc/board.d/01_leds
index bbe689bbb5..3f7fe71c0a 100755
--- a/target/linux/kirkwood/base-files/etc/board.d/01_leds
+++ b/target/linux/kirkwood/base-files/etc/board.d/01_leds
@@ -10,10 +10,11 @@ board_config_update
 board=$(board_name)
 
 case "$board" in
-"iom,ix2-200")
+iom,ix2-200)
 	ucidef_set_led_timer "health" "health" "status:white:rebuild_led" "200" "800"
 	;;
-"linksys,viper")
+linksys,e4200-v2|\
+linksys,ea4500)
 	ucidef_set_led_default "pulse" "pulse" "viper:white:pulse" "1"
 	;;
 esac
diff --git a/target/linux/kirkwood/base-files/etc/board.d/02_network b/target/linux/kirkwood/base-files/etc/board.d/02_network
index 658ce13346..a60b87c912 100755
--- a/target/linux/kirkwood/base-files/etc/board.d/02_network
+++ b/target/linux/kirkwood/base-files/etc/board.d/02_network
@@ -28,8 +28,9 @@ case "$board" in
 "zyxel,nsa310s")
 	ucidef_set_interface_lan "eth0" "dhcp"
 	;;
-"linksys,audi"|\
-"linksys,viper")
+"linksys,e4200-v2"|\
+"linksys,ea3500"|\
+"linksys,ea4500")
 	ucidef_set_interfaces_lan_wan "ethernet1 ethernet2 ethernet3 ethernet4" "internet"
 	ucidef_set_interface_macaddr "wan" $( mtd_get_mac_ascii u_env eth1addr )
 	;;
diff --git a/target/linux/kirkwood/base-files/etc/board.d/05_compat-version b/target/linux/kirkwood/base-files/etc/board.d/05_compat-version
index 8954d69d12..29d1debe58 100755
--- a/target/linux/kirkwood/base-files/etc/board.d/05_compat-version
+++ b/target/linux/kirkwood/base-files/etc/board.d/05_compat-version
@@ -9,8 +9,9 @@
 board_config_update
 
 case "$(board_name)" in
-	linksys,audi|\
-	linksys,viper)
+	linksys,e4200-v2|\
+	linksys,ea3500|\
+	linksys,ea4500)
 		ucidef_set_compat_version "1.1"
 		;;
 esac
diff --git a/target/linux/kirkwood/base-files/etc/init.d/bootcount b/target/linux/kirkwood/base-files/etc/init.d/bootcount
index 478f3d0134..bbb36eb6ea 100755
--- a/target/linux/kirkwood/base-files/etc/init.d/bootcount
+++ b/target/linux/kirkwood/base-files/etc/init.d/bootcount
@@ -4,8 +4,9 @@ START=99
 
 boot() {
 	case $(board_name) in
-	linksys,audi|\
-	linksys,viper)
+	linksys,e4200-v2|\
+	linksys,ea3500|\
+	linksys,ea4500)
 		mtd resetbc s_env || true
 		;;
 	esac
diff --git a/target/linux/kirkwood/base-files/lib/upgrade/platform.sh b/target/linux/kirkwood/base-files/lib/upgrade/platform.sh
index 6d63a0a4b7..8ff1709f2c 100644
--- a/target/linux/kirkwood/base-files/lib/upgrade/platform.sh
+++ b/target/linux/kirkwood/base-files/lib/upgrade/platform.sh
@@ -11,8 +11,9 @@ platform_do_upgrade() {
 	local board="$(board_name)"
 
 	case "$board" in
-	"linksys,audi"|\
-	"linksys,viper")
+	linksys,e4200-v2|\
+	linksys,ea3500|\
+	linksys,ea4500)
 		platform_do_upgrade_linksys "$1"
 		;;
 	*)
-- 
cgit v1.2.3