From 4642d8abdc699685db5d4eb251c71055a2bc43fa Mon Sep 17 00:00:00 2001 From: Sander van Deijck Date: Fri, 19 May 2023 00:59:25 +0200 Subject: kirkwood: add support for Iomega Storcenter ix4-200d Iomega Storcenter ix4-200d is a four-bay SATA NAS powered by a Marvell Kirkwood SoC clocked at 1.2GHz. It has 512MB of RAM and 32MB of flash memory, 3x USB 2.0 and 2x 1Gbit/s NIC Specification: - SoC: Marvell Kirkwood 88F6281 - CPU/Speed: 1200Mhz - Flash size: 32 MiB - RAM: 512MB - LAN: 2x 1Gbit/s - 3x USB 2.0 Notes: - The blue drive LED is triggered by HDD activity, it can not be controlled via GPIO. - The LCD screen requires proprietary code and does not function at this time. - Due to a kernel-related issue with the Marvell 88SE6121 SATA controller, currently only trays numbered #3 and #4 work, #1 and #2 do not. [1] Serial pinout: CN4 -------------- | 10 8 6 4 2 | | 9 7 5 3 1 | -------------- PIN 1 Mark (fat line) 1 = RXD 4 = TXD 6 = GND 9 = 3.3V (not necessary to connect) Installation instructions: 1. download initramfs-uImage and copy into tftp server 2. connect the tftp server to network port #1 3. access uboot environment with serial cable and run setenv mainlineLinux yes setenv arcNumber 1682 setenv console 'console=ttyS0,115200n8' setenv mtdparts 'mtdparts=orion_nand:0x100000@0x000000(u-boot)ro,0x20000@0xA0000(u-boot environment)ro,0x300000@0x100000(kernel),0x1C00000@0x400000(ubi)' setenv bootargs_root 'root=' setenv bootcmd 'setenv bootargs ${console} ${mtdparts} ${bootargs_root}; nand read.e 0x800000 0x100000 0x300000; bootm 0x00800000' saveenv setenv serverip 192.168.1.1 setenv ipaddr 192.168.1.2 tftpboot 0x00800000 [initramfs-uImage filename] bootm 0x00800000 4. connect to LAN on network port #2, log into openwrt and sysupgrade to install into flash [1] https://bugzilla.kernel.org/show_bug.cgi?id=216094 Signed-off-by: Sander van Deijck (aligned FROM from signed-off. LED+key rename, whitespace removal) Signed-off-by: Christian Lamparter --- target/linux/kirkwood/base-files/etc/board.d/02_network | 3 +++ 1 file changed, 3 insertions(+) (limited to 'target/linux/kirkwood/base-files') diff --git a/target/linux/kirkwood/base-files/etc/board.d/02_network b/target/linux/kirkwood/base-files/etc/board.d/02_network index df38694f40..15f75df6a8 100644 --- a/target/linux/kirkwood/base-files/etc/board.d/02_network +++ b/target/linux/kirkwood/base-files/etc/board.d/02_network @@ -37,6 +37,9 @@ kirkwood_setup_interfaces() endian,4i-edge-200) ucidef_set_interface_lan "port1 port2 port3 port4 eth1" ;; + iom,ix4-200d) + ucidef_set_interface_lan "eth0 eth1" "dhcp" + ;; linksys,e4200-v2|\ linksys,ea3500|\ linksys,ea4500) -- cgit v1.2.3