From 3228c2a682f287337db3dda880bc1e35ebaa7ce9 Mon Sep 17 00:00:00 2001 From: Mathias Kresin Date: Sat, 26 Nov 2016 10:20:03 +0100 Subject: ipq806x: more dts cleanup Remove the wifi5g LED from the the d7800, r7500 and r7800. Albeit this GPIO is mentioned in the GPL tarball, it doesn't do anything. The 2.4/5 GHz LEDs are connected to the wifi chips and not be controlled from the the userspace. Use the LEDs names/colours as they are used in the board manuals. Merge redundant LED configurations. Use the phy[0|1]tpt trigger for the wireless LEDs. Remove the workarounds for the not controllable wireless LEDs. Fix spi compatible strings and remove superfluous spi-max-frequency parameters. If there are two power leds, use one for indicating normal operation and one for failsafe/upgrade. Keep the on/off state of the main power led during boot. Use the usb pinmux settings from the nbg6817 gpl sources. Signed-off-by: Mathias Kresin --- .../linux/ipq806x/base-files/etc/board.d/01_leds | 24 +++++----------------- 1 file changed, 5 insertions(+), 19 deletions(-) (limited to 'target/linux/ipq806x/base-files/etc') diff --git a/target/linux/ipq806x/base-files/etc/board.d/01_leds b/target/linux/ipq806x/base-files/etc/board.d/01_leds index 21ad8be562..977b3b104e 100755 --- a/target/linux/ipq806x/base-files/etc/board.d/01_leds +++ b/target/linux/ipq806x/base-files/etc/board.d/01_leds @@ -16,40 +16,26 @@ c2600) ucidef_set_led_usbport "usb2" "USB 2" "${board}:white:usb_4" "usb3-port1" "usb4-port1" ucidef_set_led_switch "wan" "wan" "${board}:white:wan" "switch0" "0x20" ucidef_set_led_switch "lan" "lan" "${board}:white:lan" "switch0" "0x1e" - ucidef_set_led_default "general" "general" "${board}:white:general" "1" ;; d7800 |\ r7500 |\ -r7500v2) - ucidef_set_led_usbdev "usb1" "USB 1" "${board}:white:usb1" "1-1" - ucidef_set_led_usbdev "usb2" "USB 2" "${board}:white:usb3" "3-1" - ucidef_set_led_netdev "wan" "WAN" "${board}:white:wan" "eth0" - ucidef_set_led_ide "esata" "eSATA" "${board}:amber:esata" - ucidef_set_led_default "wps" "WPS" "${board}:white:wps" "0" - ucidef_set_led_default "rfkill" "rfkill" "${board}:white:rfkill" "0" - ;; +r7500v2 |\ r7800) ucidef_set_led_usbport "usb1" "USB 1" "${board}:white:usb1" "usb1-port1" "usb2-port1" ucidef_set_led_usbport "usb2" "USB 2" "${board}:white:usb2" "usb3-port1" "usb4-port1" ucidef_set_led_netdev "wan" "WAN" "${board}:white:wan" "eth0" ucidef_set_led_ide "esata" "eSATA" "${board}:white:esata" - ucidef_set_led_wlan "wps" "WPS" "${board}:white:wps" "phy0tpt" - ucidef_set_led_wlan "rfkill" "rfkill" "${board}:white:rfkill" "phy1tpt" - ;; -ea8500) - ucidef_set_led_wlan "wifi" "WIFI" "ea8500:green:wifi" "phy0radio" - ucidef_set_led_default "wps" "WPS" "ea8500:green:wps" "0" ;; nbg6817) - ucidef_set_led_wlan "wlan2g" "WLAN2g" "$board:amber:wifi" "phy1radio" - ucidef_set_led_wlan "wlan5g" "WLAN5G" "$board:amber:wifi5" "phy0radio" + ucidef_set_led_wlan "wlan2g" "WLAN2G" "$board:amber:wifi2g" "phy1tpt" + ucidef_set_led_wlan "wlan5g" "WLAN5G" "$board:amber:wifi5g" "phy0tpt" ucidef_set_led_netdev "wan" "WAN" "$board:white:internet" "eth1" ;; vr2600v) ucidef_set_led_usbport "usb" "USB" "${board}:white:usb" "usb1-port1" "usb2-port1" "usb3-port1" "usb4-port1" ucidef_set_led_switch "lan" "lan" "${board}:white:lan" "switch0" "0x1e" - ucidef_set_led_wlan "wlan2g" "WLAN2G" "${board}:white:wlan2g" "phy0radio" - ucidef_set_led_wlan "wlan5g" "WLAN5G" "${board}:white:wlan5g" "phy1radio" + ucidef_set_led_wlan "wlan2g" "WLAN2G" "${board}:white:wlan2g" "phy0tpt" + ucidef_set_led_wlan "wlan5g" "WLAN5G" "${board}:white:wlan5g" "phy1tpt" ucidef_set_led_switch "wan" "wan" "${board}:white:wan" "switch0" "0x20" ;; *) -- cgit v1.2.3