From d1f1e5269ed992e6fc30d575b43b0913c9e58ca2 Mon Sep 17 00:00:00 2001 From: Roger Pueyo Centelles Date: Fri, 23 Oct 2020 16:05:28 +0200 Subject: ipq40xx: add support for MikroTik SXTsq 5 ac MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This commit adds support for the MikroTik SXTsq 5 ac (RBSXTsqG-5acD), an outdoor 802.11ac wireless CPE with one 10/100/1000 Mbps Ethernet port. Specifications: - SoC: Qualcomm Atheros IPQ4018 - RAM: 256 MB - Storage: 16 MB NOR - Wireless: IPQ4018 (SoC) 802.11a/n/ac 2x2:2, 16 dBi antennae - Ethernet: IPQ4018 (SoC) 1x 10/100/1000 port, 10-28 Vdc PoE in - 1x Ethernet LED (green) - 7x user-controllable LEDs · 1x power (blue) · 1x user (green) · 5x rssi (green) Note: Serial UART is probably available on the board, but it has not been tested. Flashing: Boot via TFTP the initramfs image. Then, upload a sysupgrade image via SSH and flash it normally. More info at the "Common procedures for MikroTik products" page https://openwrt.org/toh/mikrotik/common. Signed-off-by: Roger Pueyo Centelles --- target/linux/ipq40xx/image/mikrotik.mk | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'target/linux/ipq40xx/image') diff --git a/target/linux/ipq40xx/image/mikrotik.mk b/target/linux/ipq40xx/image/mikrotik.mk index 9509ef8577..7c2fa52738 100644 --- a/target/linux/ipq40xx/image/mikrotik.mk +++ b/target/linux/ipq40xx/image/mikrotik.mk @@ -18,3 +18,11 @@ define Device/mikrotik_hap-ac2 kmod-ath10k-ct-smallbuffers endef TARGET_DEVICES += mikrotik_hap-ac2 + +define Device/mikrotik_sxtsq-5-ac + $(call Device/mikrotik_nor) + DEVICE_MODEL := SXTsq 5 ac (RBSXTsqG-5acD) + SOC := qcom-ipq4018 + DEVICE_PACKAGES := ipq-wifi-mikrotik_sxtsq-5-ac rssileds +endef +TARGET_DEVICES += mikrotik_sxtsq-5-ac -- cgit v1.2.3