From 66a3c32b47a9c9da155fd04045d7262b005a1de3 Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Mon, 24 Oct 2022 18:55:44 +0200 Subject: ipq40xx: Convert openmesh,a42 to DSA * ethernet1: - physical port label "Ethernet 1" - can be used to power the device - its mac address is printed on the device label * ethernet2: - physical port label "Ethernet 2" Both ports are not marked by there role (because the vendor firmware automatically detects roles) but the "Ethernet 1" port was used in the past for "WAN" functionality in OpenWrt. Reviewed-by: Robert Marko Signed-off-by: Sven Eckelmann --- .../files/arch/arm/boot/dts/qcom-ipq4018-a42.dts | 26 ++++++++++++++++++---- 1 file changed, 22 insertions(+), 4 deletions(-) (limited to 'target/linux/ipq40xx/files/arch/arm/boot/dts') diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-a42.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-a42.dts index 2236edf80b..89f5183045 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-a42.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-a42.dts @@ -17,10 +17,6 @@ status = "okay"; }; - mdio@90000 { - status = "okay"; - }; - tcsr@194b000 { /* select hostmode */ compatible = "qcom,tcsr"; @@ -166,6 +162,28 @@ status = "okay"; }; +&mdio { + status = "okay"; +}; + +&gmac { + status = "okay"; +}; + +&switch { + status = "okay"; +}; + +&swport4 { + status = "okay"; + label = "ethernet2"; +}; + +&swport5 { + status = "okay"; + label = "ethernet1"; +}; + &wifi0 { status = "okay"; qcom,ath10k-calibration-variant = "OM-A42"; -- cgit v1.2.3